After cutting out our second hull plate, we get it fitted and we finally finish the welding on both plates, allowing us to move onto the next big project! ...

After cutting off the port side of the chain locker, we make some new ribs and get the plate ready to be welded back into the boat! Patreon: ...

We need to install new dinghy davits on our Leopard 47 but we don’t know how to weld so our friend Singh agrees to teach us. I’m not sure how much we really ...

Arriving in Spain, we take on the challenge of fabricating our own sailboat upgrades. With a 3 month Schengen visa and still recovering from a broken neck time ...

Welcome to episode 73 of Sailing Melody Winter is coming and it's getting colder and colder here at Sailing Melody. We had to take all the old ceiling panels ...

Thanks for watching everyone! ~Ruthie p.s. if you’re near the SF Bay Area and would like to volunteer you can reach us here: [email protected]. Let us ...

Andy fills all the holes left by the old wind and depth instruments as we continue to chip away at our restoration of this 40 year old steel sailing yacht. We ...

Magnus is planning on making the davits for Peanut and our dear friend, Bryan, is a welder so he shows Magnus the ropes. Magnus begins the repair on the lid ...

Season Finale!! How to get inspired by a sailing channel, Guess which one? We are ending the season with more boat projects. Finishing up all the tasks to get ...

How to fix a leaky chainplate on a Tayana 55 CC Blue Water Sailboat! Chainplates and Turnbuckles. In this episode we go in depth on cleaning and servicing the ...

We finally get to finish up the work on the bronze floors. We had about six sets of frames that needed to go in once we removed the molds. These last sets ...

After an awesome time on Tahanae we are back in Fakarva to celebrate New Years Eve with some other sailors. Nearly a year ago we bought a welding machine back ...

⇩ Watch the full movie ⇩ Download the full movie length documentary UNTIE THE LINES at http://www.UntieTheLines.com ⇩ Want to support these videos ⇩ ► PATREON ...

This episode was a hodgepodge of activities, including a rave at the Polo Club, street flooding in Isla Mujeres, assessing and working on our broken windless, ...

Rolf's info: Rolf by Design at the Sonoma Raceway in California @RolfByDesign https://www.instagram.com/rolfbydesign/ ~Little Green Welder~ Forney Easy Weld ...

Two major things before the main mast goes up: build the mast collar for the stays and make the shrouds. When we step the mast we'll need some temporary lines ...

Part 1 checked whether this was even feasible as a DIY project. This part covers the main construction up to the point of doing the first leak test. Not a 100% ...

Rebuilding a historic sailing yacht – Shaping the Cutwater / More Timber! Support; http://www.sampsonboat.co.uk/support Become a Patron; ...

We are getting farther up the hull with the planking and as we do so, we are nearing the point at the stern where the propeller shaft will go through. We need ...

It has come time to start paying attention to the Catamaran Deck Mould that has now sat for two years waiting for some TLC. This week I start to consider the ...

In last week's episode, we went into detail about how we are fabricating the forward sawn floors. From how we are taking measurements using tick sticks and a ...

See how you can weld stainless steel using two batteries and some jumper cables. 🔔 Subscribe ➜ http://bit.ly/SBYouTube⛵ Informative Sailing Videos! Download ...

The end of the current metal work which comes with fabricating the bronze floors we are installing in Arabella is finally nearing its end. These structural ...

We're moving right along with our silicon bronze floor timbers. We tacked most of the floor pieces together in preparation for welding them in batches. ...