Sven Yrvind – Page 61

Watch Sven Yrvind Latest videos

Showing 1441-1464 of 1665 results
Me slowly cutting out the lid with the jigsaw. Both sides of the cut are important.
Sven Yrvind

Me slowly cutting out the lid with the jigsaw. Both sides of the cut are important.

Now Peter is filming me cutting out the lids. Here I have to be careful as the two created sides is for keeps. However it goes well. For more see Yrvind.com There you can also support my project with donations wia Pay pal and Swish 0706 200 550
  • Jan 16, 2022
  • Language: EN
  • Play Time: 00:08:21
First real step in the lids for the lockers in the sides for the dining room.
Sven Yrvind

First real step in the lids for the lockers in the sides for the dining room.

Now I have started making the lids for the lockers in the dining room. I have to keep many things in my head at the same time to get everything to function smouthly. Hopefully it will work out. For more see Yrvind.com There you can also support my project ...
  • Jan 15, 2022
  • Language: EN
  • Play Time: 00:01:17
Extra webbing handle on the six 14 kilo lead mowing weights.
Sven Yrvind

Extra webbing handle on the six 14 kilo lead mowing weights.

With two handles the 14 kilo lead weights will be more easy to mowe even if a sea is running. Taking time to faciliate operations is a good strategi. The task becomes more easy and are more sooner done then otherwise. Also yesterday evning the Tufnol sheet...
  • Jan 14, 2022
  • Language: EN
  • Play Time: 00:02:43
The sides in the dining room and how to get water seat lead and stowage in different places.
Sven Yrvind

The sides in the dining room and how to get water seat lead and stowage in different places.

Often there are seweral different requirements for the same space. Here a seat, 45 liters of water, 84 kilos of mowing lead, stowages, eating utensils place for my feets. With the help of the non protuding locker lids I can get most of what I want. Then b...
  • Jan 13, 2022
  • Language: EN
  • Play Time: 00:01:41
Holes instead of hookes, simpler, lighter, cheaper, and I get the center of gravity lower.
Sven Yrvind

Holes instead of hookes, simpler, lighter, cheaper, and I get the center of gravity lower.

Making better where I can all the time. On each deatil it makes not much difference, but it does have an multipying effect. This way the boat will be much better than if I just followed routine. It is not how quick the boat is build that gives me satisfac...
  • Jan 12, 2022
  • Language: EN
  • Play Time: 00:01:08
Making hooks to secure the mowing lead
Sven Yrvind

Making hooks to secure the mowing lead

Instead of they eyes in the cupper pipes here is an other way, having hooks made of M6 bolts. In the vice it is not possible to bend more than 90° but by using angle iron I can bend the hooks 180°. It is possible to use flat iron but then it is more tric...
  • Jan 11, 2022
  • Language: EN
  • Play Time: 00:02:15
Strings and knots keep the lead securly in ballast boxes, a mock up
Sven Yrvind

Strings and knots keep the lead securly in ballast boxes, a mock up

Here I show how I am going to keep the lead securely in their boxes. It will be done with strings and knots. It keeps the lead securely still no risk of fatigue. For more see Yrvind.com There you also can support my project with contributions via Pay pal a...
  • Jan 10, 2022
  • Language: EN
  • Play Time: 00:03:08
Ballast boxes for mowing lead, first step.
Sven Yrvind

Ballast boxes for mowing lead, first step.

To mowe the lead as far as possible to the windward side I dig into the 70 mm thick divinycell about 50 mm. That leaves 20 mm. That is plenty for strenght porposes. Yachts 60 feet long usually have 20 mm. As an extra precaution I dubble the carbon fibre. T...
  • Jan 09, 2022
  • Language: EN
  • Play Time: 00:01:07
Mowing ballast. The westerly gales south of Cape Horn demands good stability. 84 kilo mowable lead.
Sven Yrvind

Mowing ballast. The westerly gales south of Cape Horn demands good stability. 84 kilo mowable lead.

The Cape Horn route demands different sailing properties from the eastabout route to NZ first planned. The NZ route was mainly downwind. Downwind routes do not require so much stability nor sails with low induced resistance. The lug sails would have been O...
  • Jan 08, 2022
  • Language: EN
  • Play Time: 00:01:10
Rotating masts, the bearings and dranige.
Sven Yrvind

Rotating masts, the bearings and dranige.

Small structures small problems. The mast are about 3.5 meter above deck and carry 3.5 square meter sail. Not more than an Optimist dingy. Exlex the canoe cruiser have much more stability and her intended route will take her into much windier waters. Still...
  • Jan 07, 2022
  • Language: EN
  • Play Time: 00:01:43
Infusion succesful. I did learn. Now with the rising hoses longer easy and clean. Year 2022 is right
Sven Yrvind

Infusion succesful. I did learn. Now with the rising hoses longer easy and clean. Year 2022 is right

Now the two aft bulkheads are injected. It went very well. With the longer hose for the rising epoxy laws of nature guaranties no overflow. For more see Yrvind.com there you can support my project on Pay pal and Swish 0706 200 550
  • Jan 06, 2022
  • Language: EN
  • Play Time: 00:02:08
Poor mans wing mast. By turning the sail track to the lee side turbulence is reduced.
Sven Yrvind

Poor mans wing mast. By turning the sail track to the lee side turbulence is reduced.

As the the Ljungström mast of the rig can be rotated it can increase efficiency of the sail by greartly reduce the turbulence on the suction side of the sail. As most of the lift comes from the suction side the efficiency is much increased. The Laser mast...
  • Jan 05, 2022
  • Language: EN
  • Play Time: 00:01:17
Bulkhead infusion of NM-epoxy in aft and middle.
Sven Yrvind

Bulkhead infusion of NM-epoxy in aft and middle.

The fillets on both sides of the middle and the aft bulkhead is done. I prepare for the injuction of the NM-epoxy. last time I made a shameful mistake. The incoming hose was higher than the outgoing. The confused thinking was that I would see the epoxy com...
  • Jan 04, 2022
  • Language: EN
  • Play Time: 00:01:42
A new year, a new idea, a new route. If confused go to Yrvind.com
Sven Yrvind

A new year, a new idea, a new route. If confused go to Yrvind.com

I got a new idea. This video will try to explain but maybee it is not clear so go to my website Yrvind.com where there is a text that may make it more clear. However. I came uo with a new rig more easy to reduce sail area with. Also the voyage would be mor...
  • Jan 03, 2022
  • Language: EN
  • Play Time: 00:05:06
The Divinycell is now butt jointed and laminated on two sides.
Sven Yrvind

The Divinycell is now butt jointed and laminated on two sides.

Working in the dining room with the water containers. The mock up had 60 liters there and 60 liters under the bed. Somehow I thought I get more place in the dining room with 45 liters. I continued to work. The sleep between Dec 30 and Dec 31 got interupted...
  • Jan 02, 2022
  • Language: EN
  • Play Time: 00:01:16
1 of January. Dieting. Here is Yrvinds constant weight method in three simple steps.
Sven Yrvind

1 of January. Dieting. Here is Yrvinds constant weight method in three simple steps.

Hi friends. Here is Yrvinds constant weight method. Many people decide on this first day of the new year on a good thing. Modern life have made us to live a unhealthy life. Gouvernment have told us to eat carbo and many times. Shopping have made us consume...
  • Jan 01, 2022
  • Language: EN
  • Play Time: 00:02:42
Dining room biginning of, unfortunately 20 cm Divinycell is missing. A joint is the solution.
Sven Yrvind

Dining room biginning of, unfortunately 20 cm Divinycell is missing. A joint is the solution.

Now after experimenting with the locker lids I start with the dining room. Unfortunately 20 cm is missing of the Divinycell. Usulally the pieces are longer like 240 cm H 80 But here I am using H 200 that is 200 kilo per cubic meter. Reason is there is goin...
  • Dec 31, 2021
  • Language: EN
  • Play Time: 00:01:58
Now the development of locker lids are done and I am starting to do a bulkhead.
Sven Yrvind

Now the development of locker lids are done and I am starting to do a bulkhead.

I thank everyone for the suggestions regarding the locker lids. It is good to have people watching over what I do to Exlex the canoe yawl. That way she can feel she gets good handling. Now I turn my attention to the partial bulkhead between the dining room...
  • Dec 30, 2021
  • Language: EN
  • Play Time: 00:01:14
Todays lid I find very good. Some minor tweaking I will do to get her even better.
Sven Yrvind

Todays lid I find very good. Some minor tweaking I will do to get her even better.

I am very pleased with the results of the latest idea. It is very simple to produce compared to the other ones. Just a grove done by the router to accomendate the pvc pipe and the carbon reinforcement. To cut it out I just angle the blade of the jigsaw at ...
  • Dec 29, 2021
  • Language: EN
  • Play Time: 00:01:45
Making good progress, but will continue to simplify the latest idea
Sven Yrvind

Making good progress, but will continue to simplify the latest idea

This new idea I am satisfied with. The 8 mm polyester rope partly saturated with NM-epoxy makes a very strong rod. The non saturated part is a rope flexible that can bends to go below the deck. The rope in the carbon reinfrced PVC tube behaves like hydroli...
  • Dec 28, 2021
  • Language: EN
  • Play Time: 00:05:18
A go through again with the help of Peter and the stick problem.
Sven Yrvind

A go through again with the help of Peter and the stick problem.

I was pretty sure that the screw solution was the one to chose. However I woke up in the night with one more idea. Hopefully tomorrow I will know if it works. Sure it is best to do without the screwdriver, but if I can keep track and handle an eating spoo...
  • Dec 27, 2021
  • Language: EN
  • Play Time: 00:02:04
3 hatch lids compared. One is favorit. Watch video to the end and find out
Sven Yrvind

3 hatch lids compared. One is favorit. Watch video to the end and find out

Now I can compare the three different hatch lids. These hatches are not often used. It is important that they give a smooth surface.. The favorite is locked with two countersunk M6 Torx screws. I will use screw down lids for the lockers under the mattras. ...
  • Dec 26, 2021
  • Language: EN
  • Play Time: 00:02:16
Again a new idea for the locker lid. Peter holding the telephone stedily
Sven Yrvind

Again a new idea for the locker lid. Peter holding the telephone stedily

Again a new idea for the locker lid. This one the lid is screwed with two countersunk M6 stainless A4 screws, the nut is bronze as to make it not to size. I will also put on some lanolin grease for good measure. For more information see Yrvind.com. There y...
  • Dec 25, 2021
  • Language: EN
  • Play Time: 00:03:08
More mock up thinking and shaking test of Tufnol. Changing of mind. See explanation video unclear.
Sven Yrvind

More mock up thinking and shaking test of Tufnol. Changing of mind. See explanation video unclear.

The video is shaky and unclear. But here it is. I was not content with the lid for the stovage. I am now working on a third version. Lid 8 cm wide 5 mm thick made of Tufnol fastened with two M6 countersunk screws. To see how strong it was I took a 5 cm str...
  • Dec 24, 2021
  • Language: EN
  • Play Time: 00:06:54
Epic water experiences, one click away.

Something AWESOME is coming!
Be the FIRST to know⛵

Sign up for exclusive updates and be the first to hear when we go live!
Get sneak peeks, exciting announcement, and special content straight to your inbox!

We don’t spam! Read our privacy policy for more info.


WeBoating
Logo
Shopping cart