This is one of the toughest videos we've made in a long time - at the end of our 3-month catamaran refit, we were so ready to get back in the water but when we ...

SUPPORT our boat refit: www.red-seas.com/refit and help us keep making these videos for you. This boat project is the main reason we hauled out and started ...

The haul-out continues, and it's time to make serious progress on Into the Mystic! In this episode of Sailing into the Mystic, we work through injuries in the ...

How to Install New Thru hull Fittings Follow us on our sailing channel as we prepare our sailboat and ourselves for the next chapter in our lives and share ...

In this episode of Sailing into the Mystic, we haul out our sailboat and dive into a major boat project—removing all the thru-hull fittings and ball valves. ...

How to Remove a Thru-Hull Fitting Follow us on our sailing channel as we prepare our sailboat and ourselves for the next chapter in our lives and share what we ...

This is the final few days of the lightning damage refit in Costa Rica, as we get ready topsail 2500 miles north to the top end of Mexico, before sailing ...

We'd already started noticing some corrosion with our bronze thru hulls, so in our mission to eliminate potential points of failure, it's time to upgrade! All ...

Description Nutshell gets hauled out of the water and is given a good clean. It’s time to dig deep to find our painting supplies in the starboard aft cabin, ...

We're not ALL-IN sort of people... we didn't quit our jobs, and drop everything to sail around the world, and we weren't prepared to take on a full-time "bring ...

This week in my DIY sailboat refit project I got the chainplates and the last thru hull installed. This marks an important milestone. Athena can once again ...

All of our sailboat repair and maintenance blogs are now hosted on our dedicated maintenance channel, MOTHERSHIP MAINTENANCE Check it out here: ...

SEASON 6 / The Haul Out : Episode #124 : Seacocks o' Plenty Hello Friends, On this weeks episode we get the pipe fittings installed on all of our new Groco ...

We replaced every Thru Hull and Seacock on Sunday with TruDesign. This is a simple step-by-step guide on how we did it.

With the boat lifting onto the hardstand last week we commence our boat works which predominately included doing some repairs around the prop shaft, sanding ...

In this boating how-to video, we cover a thru-hull fitting and seacock replacement. We also explain what they are, how they work, how they break and provide a ...

This video went on a bit longer than anticipated, but so did the install process. First a bit of an update, then a detailed look at fitting the new Forespar ...

Your sailboat thru hull fittings are super important for not sinking. So we decided to install a new bronze thru hull fitting instead of our plastic one. And ...

Just managed to almost get this video into November. Things are trickling along quite slowly at the moment. But every step in the right direction is a step in ...

This is the first of a two part project. I decided to make a holding tank from glass fibre covered plywood. Partly because of cost, but also to make sure I ...

In this video we show you exactly how we replaced all of our 26-year-old seacocks. (A.K.A. thru-hull fittings) This is a 'Boat Work' video and is intended to ...

Well it rained off and on for ages whilst I was fitting the windows. Then nothing for weeks. But today it is pouring, so I am checking for leaks before I ...

A quick look at annual maintenance and some upgrades to s/v Moonshine. Don't forget to THUMBS UP, SHARE and SUBSCRIBE if you enjoyed this episode. Now you ...

Slightly longer video than usual. But I wanted to try and get the whole thing into one episode. I needed to remove two redundant thru-hulls, both either on or ...