Sven Yrvind – Page 66

Watch Sven Yrvind's Latest Videos

Catch up on the most recent updates. Browse the complete video archive and Follow the journey.

Showing 1561-1584 of 1993 results
11 August 2022 Opening the slot very carefully as not to damage the trunk sides.
Sven Yrvind

11 August 2022 Opening the slot very carefully as not to damage the trunk sides.

Today I have opened the laminated slot with care as not to damage the trunk sides. All went very well. I finished with sandpader on a piece of wood to get the outside laminate in line with the inside of the trunk. If you’re interested in contributing links are below. Swish 0706200550
  • Aug 11, 2022
  • Language: EN
  • Play Time: 00:02:16
10 August 2022. Reinforcing the bottom of the CB trunk with 5 more in addition to the 2 yesterday.
Sven Yrvind

10 August 2022. Reinforcing the bottom of the CB trunk with 5 more in addition to the 2 yesterday.

The two layers of glassfibre I did yesterday with the boat on even keel is now supplemented with five more 450 gram. It is so much more easy to work with the help of gravity that I suggest that anyone starting to build a boat first figure out how to rotate the boat. Even 40 feet steelboats can be ro...
  • Aug 10, 2022
  • Language: EN
  • Play Time: 00:01:10
9 August 2022 Closing the CB slot temporalily to prevent epoxy from enter the trunk when laminating
Sven Yrvind

9 August 2022 Closing the CB slot temporalily to prevent epoxy from enter the trunk when laminating

Next step is to laminate the bottom oc the centerboard trunk and get it attached to the outside laminate. To do that I like the boat to be upside down. That makes the work so much better. But with the boat upside down NM-epoxy will get into the centerboard slot, not a good thing. Therefore I am putt...
  • Aug 09, 2022
  • Language: EN
  • Play Time: 00:02:04
8 August 2022 The centerboard trunk gets Divinycell and thick NM epoxy from outside to be strong
Sven Yrvind

8 August 2022 The centerboard trunk gets Divinycell and thick NM epoxy from outside to be strong

Yesterday the centerboard trunk was fixed in lined up position. Today I turned the boat upside down and filled the gaps with Divinycell and thickened NM-epxy. This metod of building boats is so very easy and gives so good results that it is terrific. Tomorrow the next step. If you’re interested in c...
  • Aug 08, 2022
  • Language: EN
  • Play Time: 00:02:30
7 August 2022 The weight and installing of CB trunk +bonus improving the bycycle light
Sven Yrvind

7 August 2022 The weight and installing of CB trunk +bonus improving the bycycle light

The centerboard trunk is now in place. Its six degrees of freedom are gone she is now fixed in the relation to the boat. I lined her up as good as I could. I do not think it is ultra important. A boat moving on a wavy ocean is not a symmetrical object. Bonus is me adapting the bycycle light so that ...
  • Aug 07, 2022
  • Language: EN
  • Play Time: 00:11:04
6 August 2022. The last lamination on the trunk. Most easy so far.
Sven Yrvind

6 August 2022. The last lamination on the trunk. Most easy so far.

Today I did the last lamination on the centerboard trunk. The most easy of them all. Tomorrow it will be exciting. Hopefully I can put the trunk in the bow of the boat and get it lined up in all three degrees of freedom. If you’re interested in contributing links are below. Swift 0706200550
  • Aug 06, 2022
  • Language: EN
  • Play Time: 00:01:33
5 August 2022 A simpler way of doing fillits use the brush.
Sven Yrvind

5 August 2022 A simpler way of doing fillits use the brush.

Doing fillets and laminate the starbord side of the centerboard trunk. There are many videos on how to do fillets. They tell you to put the thickened epoxy in a bag, cut a corner of it and squise the epoxy into the place then use a tool with the appropriate radius to spread it out. Then use a chisel...
  • Aug 05, 2022
  • Language: EN
  • Play Time: 00:01:37
4 August 2022. Just a small step, nothing much.
Sven Yrvind

4 August 2022. Just a small step, nothing much.

Here is one more step in making the centerboard trunk strong. The foreward vertical side gets laminated. Part of it is open as the bow will be part of the trunk to bet as much as possible space for the control lines. If you’re interested in contributing links are below. Swift 0706200550
  • Aug 04, 2022
  • Language: EN
  • Play Time: 00:00:28
3 August 2022 Laminating the aft part of the centerboard trunk.
Sven Yrvind

3 August 2022 Laminating the aft part of the centerboard trunk.

This video shows the result of laminating the aft pat of the centerboard trunk. The fore side is planned to be donne tomorrow. After that it is time for the port and starboard side. By dividing the job into many small ones it becomes simple and I have more control over the process. The end result wi...
  • Aug 03, 2022
  • Language: EN
  • Play Time: 00:01:24
2 August 2022 Cutting the CB in G 11 epoxylaminate. A mistake and a close call on the CB-trunk.
Sven Yrvind

2 August 2022 Cutting the CB in G 11 epoxylaminate. A mistake and a close call on the CB-trunk.

With the mockup as a pattern I draw the shape of the centerboard on the G 11 epoxylaminate. It is very hard and difficult to shape but modern tools like jigsaw blade covered with carbide-tungsten grit made it much more easy than outherwise would have been. Still it was slow work but not difficult. N...
  • Aug 02, 2022
  • Language: EN
  • Play Time: 00:03:19
1 August 2022. Yrvind showing Sam Holmes his workshop and some of the tools and machines.
Sven Yrvind

1 August 2022. Yrvind showing Sam Holmes his workshop and some of the tools and machines.

Here I give Sam Holmes a guided tour of my workshop and show him some of the machines I am using. I have been building boats in many places. First outside, then the the first Bris in my Mothers basement, then an aluminum boat in Vetlanda. Then for ten years I built boats in the upper floor of Hammar...
  • Aug 01, 2022
  • Language: EN
  • Play Time: 00:12:14
31 July 2022. Sam Holmes and Yrvind talks about structures, beams, I-beams, the Divinycell advantage
Sven Yrvind

31 July 2022. Sam Holmes and Yrvind talks about structures, beams, I-beams, the Divinycell advantage

Divinycell sandwich construction is amazing. It gives you strenght, insulation and flotation all at once. Shore a metall boat is strong but you have to insulate it well especially if you intend to sail in high latitudes. Do not let there be any cold spots unless you like to spend a lot of feul to ge...
  • Jul 31, 2022
  • Language: EN
  • Play Time: 00:05:40
30 July 2022. Handling storms. Yrvind and Sam Holmes.
Sven Yrvind

30 July 2022. Handling storms. Yrvind and Sam Holmes.

Yrvind is telling Sam Holmes aboat his Ideas of handling storms. If you’re interested in contributing links are below. Swift 0706200550
  • Jul 30, 2022
  • Language: EN
  • Play Time: 00:07:20
29 July 2022. Seaworthiness with Sam Holmes. The importance of keeping the saltwater on the outside.
Sven Yrvind

29 July 2022. Seaworthiness with Sam Holmes. The importance of keeping the saltwater on the outside.

Sam is still here. Today we talk about the importance of keeping the saltwater on the outside. If you kan keep the water on the outside. The passage will be much pleasant. If you’re interested in contributing links are below. Swift 0706200550
  • Jul 29, 2022
  • Language: EN
  • Play Time: 00:07:38
28 July 2022. Sam Holmes have made an introduction to my sailing.Here it is.
Sven Yrvind

28 July 2022. Sam Holmes have made an introduction to my sailing.Here it is.

To get an overviuw Sam Holmes have made an introduction for people who are new subscribers, and I hope there will be many. Enjoy. If you’re interested in contributing links are below. Swift 0706200550
  • Jul 28, 2022
  • Language: EN
  • Play Time: 00:16:50
27 July 2022 A sheet for a new mockup centerboard Also Sam Holmes just arrived for visiting me.
Sven Yrvind

27 July 2022 A sheet for a new mockup centerboard Also Sam Holmes just arrived for visiting me.

The centerboard mockup is nearly good but a bit of tweeking will can still be made. The real centerboard will be made of 10 mm G11 epoxylaminate. I like to try it in the real centerboard trunk. I do not have any plywood left but I do have some pieces of packing. Yesterday night I glued three layer...
  • Jul 27, 2022
  • Language: EN
  • Play Time: 00:00:53
26 July 2022. Trying to get the starboard side of the centerboard trunk into position. Not done.
Sven Yrvind

26 July 2022. Trying to get the starboard side of the centerboard trunk into position. Not done.

I am trying to get the starboard side of the centerboard trunk int position. A lot more of shaping the side and the slot is required. To fit a three dimensional part is more difficult than to fit a twodimensional part. many more small steps are needed. If you’re interested in contributing links are...
  • Jul 26, 2022
  • Language: EN
  • Play Time: 00:01:24
25 July 2022. Gluing upper part of starboard centerboard trunk side using my big clamps. Plus bonus.
Sven Yrvind

25 July 2022. Gluing upper part of starboard centerboard trunk side using my big clamps. Plus bonus.

Today I have glued the top part of the starboard side of the centerboard trunk. I needed ny deep klamps. They are so heavy that I have to use strenght to handle them. Thanks to keeping fit I had the necessary strenght. Also today you are in luck an extra video about boat size will make you - if you ...
  • Jul 25, 2022
  • Language: EN
  • Play Time: 00:03:03
24 July 2022 More on the centerboard case Starboard side bottom part.
Sven Yrvind

24 July 2022 More on the centerboard case Starboard side bottom part.

Not much. This work is mostly to put a bottom to the groove. But also to make the upper part even to take the part where the ropes are.
  • Jul 24, 2022
  • Language: EN
  • Play Time: 00:02:14
23 July 2022 . Now a video with content More on the groove in the centerboard trunk.
Sven Yrvind

23 July 2022 . Now a video with content More on the groove in the centerboard trunk.

Thanking all the generous people for the donations yesterday as I was celebrating 83 1/4 of good life. Next begging will be August 22 when I will be celibrating 83 1/3 of good life. Todays video is about the groowe in the centerboard trunk. The groowe serves to get the centerboard out of the trunk a...
  • Jul 23, 2022
  • Language: EN
  • Play Time: 00:05:25
22 July 2022. 83 1/4 year old today. Donate help me continue to build and make short videos. Thanks.
Sven Yrvind

22 July 2022. 83 1/4 year old today. Donate help me continue to build and make short videos. Thanks.

I am very grateful to everyone that have supported my project with donations via Pay pal and Swish 0706 200 550. There is a button on my site Yrvind.com Also on the launcing page of this channel. Up to three years ago I was able to support myself via public speaking and by selling books. Corona sto...
  • Jul 22, 2022
  • Language: EN
  • Play Time: 00:00:58
21 July 2022. The wear resistance of Tufnol. Also the mockup now works to my outmost satisfaction.
Sven Yrvind

21 July 2022. The wear resistance of Tufnol. Also the mockup now works to my outmost satisfaction.

Here is about the excellent wear resistance of Tufnol. I am convinced that it will not let me down. Also after many many iterations the centerboard mockup now works to my complete satisfaction. In my wiev it is a good thing to spend several days working out the bugs of a novel arrangements as once ...
  • Jul 21, 2022
  • Language: EN
  • Play Time: 00:03:50
20 July 2022. Tweaking the mockup.
Sven Yrvind

20 July 2022. Tweaking the mockup.

I have now done some adjustments to the mockup. Things looks OK. There will be more as I convert it to composite. For more see Yrvind.com There you can support my project with donations via Pay pal and Swish 0706 200 550
  • Jul 20, 2022
  • Language: EN
  • Play Time: 00:05:35
19 July 2022. Not much just a simple homemade device for finding the center of a disc.
Sven Yrvind

19 July 2022. Not much just a simple homemade device for finding the center of a disc.

I need to find the center of the Tufnol disk I will attach to the centerboard. If the chuck on my lathe was taking larger diameter pieces that would be more easy. I can change the holders in the chuck and then change them back but this method is much quicker. There is no rotation involved so I do n...
  • Jul 19, 2022
  • Language: EN
  • Play Time: 00:01:30
WeBoating
Logo
Shopping cart