Watch Sailing & Boating Adventures Around the World

Explore sailing, boating, and water sports through our curated video archive. From epic sea voyages to serene diving escapes, discover unforgettable adventures from top YouTube creators. Start your journey. Dream big. Sail far.

Showing 1-9 of 9 results
ENGINE REFIT: was it worth it? [LIVE Q&A] [RED SEAS]
Sailing Red Seas

ENGINE REFIT: was it worth it? [LIVE Q&A] [RED SEAS]

We sailed across the Pacific Ocean last year and one of our engines blew up along the way. We thought that meant game over for us but you, our viewers and supporters, came to our rescue and we replaced both our old Yanmar engines with two brand new Nanni N4.50s. We did all the work ourselves without...
FIRST SAIL: crossing the channel with our NEW NANNI ENGINES (sea trial) [Ep128 RED SEAS]
Sailing Red Seas

FIRST SAIL: crossing the channel with our NEW NANNI ENGINES (sea trial) [Ep128 RED SEAS]

We take our new Nanni engines out for their first sail as we cross the channel from Tahiti to Moo'rea for our sea trial. The sense of freedom that we have now that we are on the move again is unreal and we are so excited to get back to sailing and exploring in this part of the world. We finish ...
Can we FIX THIS? Installing TWO engines (in a storm!) [Ep125 RED SEAS]
Sailing Red Seas

Can we FIX THIS? Installing TWO engines (in a storm!) [Ep125 RED SEAS]

We've installed the two new engines on our boat but now comes the most important part - and if we get it wrong, we're screwed! We need to install our raised engine beds (that we fiberglassed ourselves in last week's video) and then figure out how to align the new engines to the prop s...
Two new engines, ONE BIG PROBLEM! [Ep124 RED SEAS]
Sailing Red Seas

Two new engines, ONE BIG PROBLEM! [Ep124 RED SEAS]

We installed a brand new Nanni engine in our boat but it doesn't fit in the space so we need to make new engine beds out of wood and fiberglass to raise it by 5cm so that it will align to our prop shaft. As there's a cyclone headed our way, we decided to get to work on the second engine so...
NANNI: the FIX to all our YANMAR PROBLEMS! [Ep123 RED SEAS]
Sailing Red Seas

NANNI: the FIX to all our YANMAR PROBLEMS! [Ep123 RED SEAS]

We are replacing our old Yanmar engines with two brand new Nanni N4.50s. After a battle with customs in Tahiti, the new engines finally arrive on the dock and we are so excited to unbox them. We use a chain hoist on our boom to lift one engine onto our boat and luckily it fits through the hatch! The...
BIG PROBLEM with our YANMAR ENGINES! [Ep122 RED SEAS]
Sailing Red Seas

BIG PROBLEM with our YANMAR ENGINES! [Ep122 RED SEAS]

We’re replacing both our old Yanmar engines with brand new Nanni N4.50s. In this video, we spin our boat round so our port side is against the dock and remove our second engine. Unfortunately, we then get stalled as we face difficult customs decisions and have to fight an unexpected $7000 bill. We...
How to REMOVE A YANMAR ENGINE from a Leopard catamaran! [Ep121 RED SEAS]
Sailing Red Seas

How to REMOVE A YANMAR ENGINE from a Leopard catamaran! [Ep121 RED SEAS]

We are removing our old Yanmar engine from our Leopard 47 catamaran so that we can replace it with a brand new Nanni N4.50. We have to get a little bit destructive and cut away parts of our boat to make it fit out the hatch, but we are determined to get this project finished and see this broken engi...
Removing our YANMAR ENGINES – not going to plan! [Ep120 RED SEAS]
Sailing Red Seas

Removing our YANMAR ENGINES – not going to plan! [Ep120 RED SEAS]

We are taking on the biggest boat refit of our lives as we remove both our old Yanmar engines and replace them with brand new Nanni N4.50s. In this video we have to disconnect all the wires and plumbing from our starboard engine but a few seized bolts on the coupling and some badly placed fibreglass...
Time to FIX OUR ENGINES! (Repowering our boat – Part 1) [Ep119 RED SEAS]
Sailing Red Seas

Time to FIX OUR ENGINES! (Repowering our boat – Part 1) [Ep119 RED SEAS]

After sailing around French Polynesia for the last 9 months with only one engine, the time has come for us to fix the problem once and for all. We head into a nearby marina and start the work to remove our generator which will allow us to take out both engines from our boat before our new Nanni engi...
WeBoating
Logo
Shopping cart