We're surrounded by big bulkheads, and now it's time to get the first one glassed in to the bridge deck. We do a little jumping around in this episode, giving ...
MJ Sailing
Just back from a great holiday, it can hit you in the face, the task at hand is Huge and it is so important to get working. The "Momentum is Critical" as I ...
Life On The Hulls
The BIG bulkheads are going in!! And now we have walls and doors that make up the shower in our owner's hull. This next episode I love for two reasons. ...
The mass of foam core in a Catamaran Deck takes a lot of working out to reach the desired outcome of strength, stiffness and structure and this week the deck ...
Boat building with modern composites requires an understanding of the chemistry , the process, and the engineering to get the best result. As winter hits the ...
Boat building is a complicated process, and this boat build seems doubly so! In our first Ruby Rose 2 video we look at the whole boat building process ...
Sailing Ruby Rose
In preparation for our bulkheads to get placed in, there are five areas we need to lay down unidirectional fiberglass, spanning from one hull to the other. We ...
We're AMOST to the stage where we can begin putting in our bulkheads!! But we have just a few preparatory steps before we can get there. Although the ...
** Become a Patron, and get your NAME written on our Catamaran!! https://www.patreon.com/mjsailing ** Now that we have bonded the bridge deck together, it's ...
This is the moment we officially become a catamaran!! ** Support the build - become part of our Patreon family!! https://www.patreon.com/mjsailing ** We ...
We've finally done it!! We've made our first bond with methacryalte! Not much from keeping us being a floating catamaran now! ** Support the build - become ...
We have a treat for you with our newest episode - and the great news that our Methacrylate has arrived! Now this means we can permanently bond our hull pieces ...
In Part 1 of this episode, Matt and I focus once more on bulkheads number 4 and 5. Now that we've cut out the areas where the doors will be, we need to go ...
With our MDF board properly measured and cut, we can now transfer that to our bulkheads to cut out three perfectly matching doors. The two of us take the ...
This week we move onto work with our bulkheads and run into one area that has us scratching our heads. **Want to support the build and get behind the scenes ...
After one year of planning and six months back in the US, we finally have the components of our catamaran arriving to us, which means the build can commence! ...
Want to be the first to know all our boat building secrets? Become a Patron now!! https://www.patreon.com/mjsailing When we first bought the components for ...
You may have heard before that we worked out a deal with the marina for our build site - but did you know we're only paying ONE DOLLAR A YEAR to be there? ...
In this video, Emily does some clear-coating, fiberglassing, and filleting to prep the seats, bulkheads, and inspection ports as she nears the sanding stage of ...
Emily & Clark’s Adventure (Clark’s Adventure)
You are all invited to the "Life On The Hulls" worksite to help me get this humungous hull out of the Mould. Put on your work boots, slap on some sunscreen and ...
Girls can build stuff, too! Support this and other projects via our Patreon page: http://patreon.com/EmilyAndClark Over two months, Emily built a lightweight ...
Somehow it happened without us even trying or searching - but we've stumbled upon a build site for the new catamaran! Support the build, and get bonus ...
Which did we choose, the Schionning Arrow 1360? Or the Max Cruise 42 SC? After much debate, we finally make the decision of which catamaran we're going to ...
Figuring out who does what tasks is very important to keeping everyone happy while living aboard a sailboat. For the majority of the summer, I (Dana) have been ...
Wild We Roam