We are so grateful for the help we’ve received, and continue to receive, from our community. It would be so much more daunting if we didn’t have the help from ...

I explain why I chose white oak structural timbers for the keels and show how I installed them without any fasteners. I give a quick demonstration of how to ...

Weeks of work finalising the structure to drop the deck down in this weeks issue. I jam myself into places I simply shouldn't be in and the payoff is a sound ...

In this video I give a complete step by step guide on how to fit, build, and install a bulkhead from start to finish. Make a one time donation to Wave Rover ...

Our engine better run or else! We've bought a big box of engine parts and Garrett is working his way through it. Hoping to prevent any more surprises... ...

I invite you all on site to the "Catamaran Raising Deck" for the first and last last time as we position it very carefully for the final preparation before ...

Using the Wave Rover Time Machine I move forward about 2 months in the Wave Rover timeline to show you my current progress and ask for your input. Check our ...

Thanks for watching everyone! ~Ruthie p.s. if you’re near the SF Bay Area and would like to volunteer you can reach us here: [email protected]. Let us ...

Tight spaces, structural bulkheads, logistical planning and help is at hand with a good mate giving up his holiday time to lay down some laminates in the stern ...

Sooner or later we will be sipping on that margarita tropical style! It might not be today but we are closer than we were yesterday. Every day adds to the sum ...

I explain why I have removed the cockpit from the plan and at the same time why I must rebuild the transom. Make a one time donation to Wave Rover of $100 ...

Needing some better access I have embarked on another simple modification that will bring the boat in to a more modern design. Patreon Membership Thank you ...

Time to start fitting the bulkheads. Make a one time donation to Wave Rover of $100 USD and your name will be affixed to the "BENEFACTOR'S BULKHEAD" onboard ...

Come hang out with us as we install our yankee tracks to lead the sheets aft. We talk about the placement of the wenches we'll add and the platforms we'll have ...

Are you prepared to cut into brand new Catamaran Deck to achieve the best result, well I am, and it may look like a drastic solution, but the result will be a ...

Time to remove the peel ply, measure out for the bulkheads and ring frames, coat the inside with 2 coats of S1 epoxy sealer. Make a one time donation to Wave ...

The staysail boom is ready to be added. We get the staysail up to speed with our previous two sails, the main and the mizzen. Next week we continue on the ...

You could only describe this week's video as a "Monster" as the laminating and foam core of our 217 SQ Foot Catamaran Hard Top is finished and ready to be ...

A crack team of helpers assembles for this big glassing job. The 18oz bi-axial Fiberglass is applied over the robust fillet we shaped in the last episode. Peel ...

4 out of 4 and we give Mike a 10 out of 10! Our 4 working sails are here and are being fitted to the boat. We will have other light wind and storm sails but ...

The reason for this new and hopefully reoccurring mini episode is two fold: 1. To give a glimpse of the current state of the Wave Rover build 2. To get input ...

Things are about to get a little tight in the bedroom. It's time to get back to building!! And you guessed it....more toilet talk!, lol. Not too much this ...

The third massive piece of our Catamaran gets it's shiny white Gel Coat in this week's video. The preparation alone is enough to make you weep, let alone the ...

Fillets! What are they and where do they come from? This video is all about mixing up and installing structural fillets. Make a one time donation to Wave ...