Jack and Wes are back to do more work on Arabella. Wes's earlier visits involved stacking lumber and bending frames. Now he's back for a taste of planking and ...

We're back to planking! We've asked some of our skilled friends to come back and help us get closer to closing up Arabella's hull. We have eight oak planks, a ...

Lots going on here at the boathouse. It's time to put the taper in the top of the mast. Turns out there's a little bit more to that than just doing a ...

Bilge stringers (which we also call bilge bands) add longitudinal stiffness to Arabella in an area of the boat where it's needed. Carolyn, who's been working ...

Live Q&A Session we held on Friday, April 16 from Arabella’s boat shed in Granby, MA. We also talked about the important changes coming to Patreon as of ...

We are looking ahead to getting back to planking Arabella this summer. In order to do that, we are going to want all hands on deck, so we got a little help ...

This sailboat tour is part 1of 4 sailboat log that started as a short 2 day cruise that turn into 15 day sailing adventures on a Turkish Gullet. We start with ...

There is a lot of work going into restoring Victoria's old mast to be our mizzen mast. We already set up a sort of lathe and jig to cut kerfs into the mast so ...

We're starting on the interior! At least starting with the pieces of the interior. Steve is milling up the stock that is going to become the bilge bands. ...

Getting Victoria early in the project was one of the best decisions we have made. There was so much good material packed in that little vessel, and it seems ...

With the main mast step finished, it's time to make the mizzen mast step. This one is significantly smaller as it will hold a significantly smaller mast and ...

The bronze floors are done! It's a great feeling complete them and be able to move on to even more tasks that get us closer to launch. Steve keeps on with ...

With wrapping up the bronze floors comes working on the mast step. This wild looking piece is built up out of live oak and black locust and looks more like a ...

We finally get to finish up the work on the bronze floors. We had about six sets of frames that needed to go in once we removed the molds. These last sets ...

Building a boat can seem like an incredibly daunting task. One thing that has gotten us through these years is seeing it a lot of little things that need to ...

There are a lot of exciting things coming together at the moment. Steve installed the rest of the tie rods, Alix finished the sill for the deckhouse to sit on ...

Rebuilding a historic sailing yacht - Finishing Casting & Floors / Plank Stock (EP83) Support; http://www.sampsonboat.co.uk/support Become a Patron; ...

We talk about some of the skills you are going to need to know in order to build a wood boat. We highlight Lofting, Lamination, Shaping and Filleting. We even ...

Rebuilding a historic sailing yacht - Pouring Bronze / Fastening Floors (EP81) Support; http://www.sampsonboat.co.uk/support Become a Patron; ...

We had some lofty plans before borders started to close and made us rethink our summer plans. We ended us flying to Maui, Hawaii to stay with Spencer's parents ...

Rebuilding a historic sailing yacht - Cutting for Propeller / Boring for Prop-Tube (EP80) Support; http://www.sampsonboat.co.uk/support Become a Patron; ...

Rebuilding a historic sailing yacht - Lining-out for Planking (EP78) Support; http://www.sampsonboat.co.uk/support Become a Patron; ...

Rebuilding a historic sailing yacht - Finishing the Transom / More Floors (EP76) Support; http://www.sampsonboat.co.uk/support Become a Patron; ...

Rebuilding a historic sailing yacht - Casting Bronze Floors (EP75) Support; http://www.sampsonboat.co.uk/support Become a Patron; ...