Right as we finalize pre-departure checks for our major Sea of Cortez passage on Noeta, our 57 foot Nordhavn, the notoriously problematic sea chest raw water ...
Volo
The haul-out continues, and it's time to make serious progress on Into the Mystic! In this episode of Sailing into the Mystic, we work through injuries in the ...
Boat projects continue as we tackle a busy weekend of maintenance aboard Into the Mystic! In this episode of Sailing into the Mystic, Tim and Jess work ...
How to Install New Thru hull Fittings Follow us on our sailing channel as we prepare our sailboat and ourselves for the next chapter in our lives and share ...
In this episode of Sailing into the Mystic, we haul out our sailboat and dive into a major boat project—removing all the thru-hull fittings and ball valves. ...
How to Remove a Thru-Hull Fitting Follow us on our sailing channel as we prepare our sailboat and ourselves for the next chapter in our lives and share what we ...
Learn about the crucial upgrades needed to ensure your boat stays afloat during challenging conditions: replacing bronze through-hulls with durable composites ...
This is the final few days of the lightning damage refit in Costa Rica, as we get ready topsail 2500 miles north to the top end of Mexico, before sailing ...
We'd already started noticing some corrosion with our bronze thru hulls, so in our mission to eliminate potential points of failure, it's time to upgrade! All ...
Description Nutshell gets hauled out of the water and is given a good clean. It’s time to dig deep to find our painting supplies in the starboard aft cabin, ...
All of our sailboat repair and maintenance blogs are now hosted on our dedicated maintenance channel, MOTHERSHIP MAINTENANCE Check it out here: ...
We replaced every Thru Hull and Seacock on Sunday with TruDesign. This is a simple step-by-step guide on how we did it.
The pre-launch maintenance and upgrade projects aboard Talisman continue, with install of all new head/toilet piping, Oceanaire SkyScreens, sea-cocks and ...
Your sailboat thru hull fittings are super important for not sinking. So we decided to install a new bronze thru hull fitting instead of our plastic one. And ...
In this video we show you exactly how we replaced all of our 26-year-old seacocks. (A.K.A. thru-hull fittings) This is a 'Boat Work' video and is intended to ...
Slightly longer video than usual. But I wanted to try and get the whole thing into one episode. I needed to remove two redundant thru-hulls, both either on or ...
The welder will come next week and I used the time for some other projects on the endless to do list. I widened the through-hull for my new depth sounder and ...
This is part 4 of a 4 part series on replacing the thru hulls on a Lagoon 38 catamaran. In Part 4 of the seacock replacement series I show the final ...
If you find this video helpful please return the favor and support me efforts at http://www.patreon.com/user?u=370672&alert=1 This is part 3 of a 4 part ...