If you like our videos, you can always drop a tip in our coffee jar https://ko-fi.com/sailingyachtsaltylass ABOUT US We have begun a liveaboard adventure ...

After 2 months in the water it was time to start cleaning the hull, scraping off what's grown under the waterline in the warm Caribbean waters! We completely ...

The time had come. SV Our Dreamtime had not been out of the water since pre-covid days so we expected a tough week’s work when she was hauled out at ...

We're back in Greece, in the boat yard and we have one very important boat job still left to do while our boat is on the dry dock...And that's our antifoul ...

We dig into some of the boats darker corners and find a few remaining horror stories as far as electrics go, but the nightmare is the life raft cradle. ---- ...

This week we are doing a bottom job! We used Magic Antifoul barrier and hull coating and also used their prop coating, Triton Prop, for the props, sail drives ...

We replaced every Thru Hull and Seacock on Sunday with TruDesign. This is a simple step-by-step guide on how we did it.

With the boat lifting onto the hardstand last week we commence our boat works which predominately included doing some repairs around the prop shaft, sanding ...

After hauling out, we start the work on the mast, replacing the sewage systems and doing work on the keel. Gaynor also discovers her inner teacher and gives a ...

The time had come to haul Sarean out of the water, discover what had gone on with our prop, and give her some much needed loving. Depending on your time and ...

Back to the boat meant back to work and there was a lot to get done in order to prep Starry Horizons for another season of cruising. Our goal was to tackle as ...

This video covers one of the main reasons for our voyage North to America. It shows our haul-out at Bennett Brothers Yachts, footage of the Coppercoat process, ...