In his workshop, Sven Yrvind prepares to attach the transom and begin skinning the bottom of Bris X, a compact plywood test hull built to evaluate adjustable steering fins and composite construction techniques before tackling a high-latitude passage.
Working methodically at the stern, Yrvind creates an intentional gap along the transom junction to receive thickened epoxy before securing the joint. Simultaneously, he pushes down the forward sections to fair the hull lines. To protect the test boat against unexpected obstacles at sea, he doubles the forward plywood skin, noting that added structural strength is critical should the vessel encounter floating debris. Yrvind secures the glued sections using screws and a rule, applying a generous bead of thickened epoxy along the seams to fill voids and seal the timber.
With the hull sides assembled, Yrvind addresses feedback from observers who argue that “These fins take up too much space.” He points out that replacing a conventional stern rudder with hull-mounted fins actually decreases occupied interior volume. While the fins were originally conceived for downwind stabilization and braking, Yrvind recognized they could handle active steering duties as well.
Yrvind clarifies that interior space is not the primary concern aboard a micro-cruiser; managing total vessel weight is the real priority. Ample space remains below the bunk and dining bay, but filling those areas with gear adds unnecessary displacement. Instead, only lightweight items such as mooring lines and fenders occupy the forward and aft ends.
Because a single sheet of plywood cannot span the entire hull bottom, Yrvind must join multiple panels. Operating solo, he plans each assembly step deliberately on the bench “Because the glue is drying quickly.” He aligns the plywood sheets, applies epoxy, and fastens the joint with temporary screws to cure before lifting the completed panel onto the inverted hull.
Explaining his iterative development mindset, Yrvind notes, “That’s why I call it Bris X.” When evaluating novel maritime concepts, his approach remains pragmatic: “Try a thing, doesn’t work, try another thing.”
| Specification | Measurement |
|---|---|
| Hull Length | 4.8 meters |
| Beam | 1.3 meters |
| Sail Area | 6 square meters |
Sven doubles the forward plywood to provide extra impact resistance in case the hull collides with floating objects while underway.
The adjustable fins were originally designed for braking and stabilization, but Sven adapted them to handle directional steering, eliminating the stern rudder and saving interior space.
Working alone, Sven pre-assembles the plywood joint with screws on the bench because the epoxy glue cures rapidly.
Sven explains that weight rather than space is the primary limit on a small boat, so open areas under the bed and dining bay must not be overloaded.
At WeBoating.com, we profoundly acknowledge the unwavering dedication that Sven Yrvind invests in crafting each and every video or voyage. Their passion for delivering exceptional ocean content shines through every frame, and it's a labor of love that deserves your attention.
We invite you to watch their captivating videos here and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.
We're also inviting you to explore the gear, sponsorships, and boat partnerships highlighted in the "Starting on the Bottom." video description, or directly on YouTube. By engaging with these offerings or purchasing services and items, you directly support Sven Yrvind, their collaborators, and the brands they're associated with.
To ensure you never miss an offshore update, consider visiting their official YouTube Channel to subscribe, like, and join their community directly.
If you have any feedback, corrections, or additional information about Sven Yrvind or their videos, please use the comment form below to share your thoughts with us.
Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!
This Youtube channel is about me Sven Yrvind. I am 87 and a half years old dyslectic solo sailor.
I am building a plywood test boat for a Divinycell and NM-epoxy high-latitude cruiser.
She will be about 4.8 meter 15 and a half feet long. Her beam will be 1.3 meter. She is a two masted lugger with a total sail area of 6 square meter. She will have no rudder but will be steered by adjustable fins. I am planning a cruise in the Southern Ocean to Dunedin NZ.
Subject to change.
Often the 22th every month I do a resume of the project.
I have an illustrated book with good reviews on Amazon. https://www.amazon.se/s?k=yrvind&crid=1549D6PR18BUJ&sprefix=%2Caps%2C112&ref=nb_sb_ss_recent_1_0_recent
If you’re interested in contributing to my experiments links are below.
https://www.paypal.com/donate/?hosted_button_id=53X8NVEA22MBL
Swish 0706200550
Also please subscribe - even if you are not interested in sailing.
For more see Yrvind.com
Explore the most recent voyages. Subscribe to the channel to never miss an update!