Inside his Västervik workshop, Swedish boatbuilder Sven Yrvind aligns interior push doors and storage locker lids on his experimental plywood hull. The task requires fastening wooden locator stops securely around each locker rim so the covers seat flush and remain tight in heavy motion at sea.
Securing small wooden parts inside tight hull spaces presents distinct gluing challenges. Traditional screw clamps or spring grips can shift delicate wood components or lose clamping force as excess epoxy squeezes out from the joint. To avoid these issues, Yrvind relies on deadweight gravity clamps placed directly across the newly glued surfaces.
“They always use exactly the same pressure,” Yrvind explains while positioning the weights over the wet joints. “Even if some bit glue flows out and the wood gets a bit closer, now the gravity clamps do the same pressure all the time.”
Because gravity exerts a constant downward pull, the weights compensate automatically as the adhesive line compresses. The setup maintains uniform force through day and night without requiring adjustments or retightening.
Once the locator strips and locker lids are properly weighted down, the assembly must remain undisturbed while the epoxy cures. Yrvind allows the chemical bond to develop overnight before handling the cabinetry again.
“And if the chemistry is working as it should, they should be good here,” Yrvind notes as the weights settle. Once the adhesive reaches full strength, the next phase of construction involves installing the turn button latches and completing further interior joinery across the test boat.
Gravity clamps supply constant downward force as epoxy squeezes out from the joint. Because deadweight does not rely on mechanical tension, the pressure remains identical as the timber settles closer together.
Yrvind is securing wood locator pieces, push doors, and locker lids inside the storage openings of his plywood test boat.
After allowing the chemical bond to set undisturbed overnight, Yrvind installs the turn buttons and proceeds with additional interior gluing.
At WeBoating.com, we profoundly acknowledge the unwavering dedication that Sven Yrvind invests in crafting each and every video or voyage. Their passion for delivering exceptional ocean content shines through every frame, and it's a labor of love that deserves your attention.
We invite you to watch their captivating videos here and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.
We're also inviting you to explore the gear, sponsorships, and boat partnerships highlighted in the "Using Gravity Clamps for Gluing Locker Covers." video description, or directly on YouTube. By engaging with these offerings or purchasing services and items, you directly support Sven Yrvind, their collaborators, and the brands they're associated with.
To ensure you never miss an offshore update, consider visiting their official YouTube Channel to subscribe, like, and join their community directly.
If you have any feedback, corrections, or additional information about Sven Yrvind or their videos, please use the comment form below to share your thoughts with us.
Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!
This Youtube channel is about me Sven Yrvind. I am 87 and a half years old dyslectic solo sailor.
I am building a plywood test boat for a Divinycell and NM-epoxy high-latitude cruiser.
She will be about 4.5 meter or 14 feet and 9 inches long, the beam 1.36 meter, 4 feet 6 inches. She is a two masted lugger with a total sail area of 6 square meter. She will have no rudder but will be steered by adjustable fins. I am planning a cruise in the Southern Ocean to Dunedin NZ.
Subject to change.
Often the 22th every month I do a resume of the project.
I have an illustrated book with good reviews on Amazon. https://www.amazon.se/s?k=yrvind&crid=1549D6PR18BUJ&sprefix=%2Caps%2C112&ref=nb_sb_ss_recent_1_0_recent
If you’re interested in contributing to my experiments links are below.
https://www.paypal.com/donate/?hosted_button_id=53X8NVEA22MBL
Swish 0706200550
Also please subscribe - even if you are not interested in sailing.
For more see Yrvind.com
Explore the most recent voyages. Subscribe to the channel to never miss an update!