More mocking up.

Sven Yrvind steps inside a full-scale wooden mockup in his Västervik workshop, assessing bunk clearance, seated headroom, and hatch latches for his ocean test boat.

Inside his workshop in Västervik, Sven Yrvind steps directly into the full-scale interior mockup of his compact ocean cruising craft. The Swedish builder is examining the living compartment to verify physical clearances before cutting final panels.

Working inside the narrow wooden frame, Yrvind evaluates the placement of the primary sleeping bunk and the storage space beneath it. The volume below the bed accommodates dedicated water storage, while adjacent sections define the designated eating area. To confirm comfort during extended passages, he reviews the precise stacking order of the bunk, detailing how the support board will receive the mattress, bedding sheet, and blankets.

Evaluating Hull Heights and Internal Openings

Stepping into the structure to test real-world ergonomics, Yrvind positions himself along the bottom timbers to judge boundary heights. Looking across the cabin layout, he notes, “I’m going to decide on how the sides are going to be.” He assesses the profile from both sides of the hull, ensuring the raised sections will shield the interior while permitting functional access.

After stepping between the frames, Yrvind inspects the revised pass-throughs, remarking that “these openings much much better than before” compared to earlier mockups. The increased space provides greater ease of movement across the interior, confirming that the compact hull offers sufficient practical volume.

Testing Headroom and Hatch Locking Mechanisms

Taking a seated position inside the living space, Yrvind verifies that his head clears the overhead structure with room to spare. Looking through the compartment, he observes, “I can look forward I can look back” without restriction, ensuring adequate situational awareness from the seating and dining station.

With spatial dimensions verified, Yrvind outlines the transition toward finished construction. The tested mockup templates will be transferred onto plywood sheets. Before permanent installation, he plans to cut multiple access hatches across the cabin floorboards and lockers, adding, “I’m going to make turn buttons but special ones” to secure every lid against ocean motion.

Frequently Asked Questions

What is Sven Yrvind testing with the interior mockup?

Sven Yrvind is evaluating clearances inside the living compartment to verify seated headroom, sightlines forward and aft, and the fit of the sleeping bunk and water storage.

How will Sven Yrvind secure the interior hatches?

Yrvind plans to craft specialized turn buttons to lock every hatch cover before permanently securing the plywood panels.

Support Sven Yrvind

At WeBoating.com, we profoundly acknowledge the unwavering dedication that Sven Yrvind invests in crafting each and every video or voyage. Their passion for delivering exceptional ocean content shines through every frame, and it's a labor of love that deserves your attention.

We invite you to watch their captivating videos here and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.

We're also inviting you to explore the gear, sponsorships, and boat partnerships highlighted in the "More mocking up." video description, or directly on YouTube. By engaging with these offerings or purchasing services and items, you directly support Sven Yrvind, their collaborators, and the brands they're associated with.

To ensure you never miss an offshore update, consider visiting their official YouTube Channel to subscribe, like, and join their community directly.

If you have any feedback, corrections, or additional information about Sven Yrvind or their videos, please use the comment form below to share your thoughts with us.

Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!

This Youtube channel is about me Sven Yrvind. I am 87 and a half years old dyslectic solo sailor.
I am building a plywood test boat for a Divinycell and NM-epoxy high-latitude cruiser.
She will be about 4.5 meter or 14 feet and 9 inches long, the beam 1.36 meter, 4 feet 6 inches. She is a two masted lugger with a total sail area of 6 square meter. She will have no rudder but will be steered by adjustable fins. I am planning a cruise in the Southern Ocean to Dunedin NZ.
Subject to change.
Often the 22th every month I do a resume of the project.
I have an illustrated book with good reviews on Amazon. https://www.amazon.se/s?k=yrvind&crid=1549D6PR18BUJ&sprefix=%2Caps%2C112&ref=nb_sb_ss_recent_1_0_recent
If you’re interested in contributing to my experiments links are below.
https://www.paypal.com/donate/?hosted_button_id=53X8NVEA22MBL
Swish 0706200550
Also please subscribe - even if you are not interested in sailing.
For more see Yrvind.com

More mocking up. Location

  • Västervik, Sweden (57.758,16.637)
We will be happy to hear your thoughts

Leave a reply


Latest Episodes from Sven Yrvind

Explore the most recent voyages. Subscribe to the channel to never miss an update!

Showing 1-6 of 1996 results
Using Gravity Clamps for Gluing Locker Covers.
Sven Yrvind

Using Gravity Clamps for Gluing Locker Covers.

Swedish solo sailor Sven Yrvind installs locker push doors and lids, employing gravity clamps to deliver steady downward pressure as epoxy cures in his workshop.
Taking Down My Charts and Talking About Boat Plans.
Sven Yrvind

Taking Down My Charts and Talking About Boat Plans.

This Youtube channel is about me Sven Yrvind. I am 87 and a half years old dyslectic solo sailor. I am building a plywood test boat for a Divinycell and NM-epoxy high-latitude cruiser. She will be about 4.5 meter or 14 feet and 9 inches long, the beam 1.36 meter, 4 feet 6 inches. She is a two mas...
More mocking up.
Sven Yrvind

More mocking up.

Sven Yrvind steps inside a full-scale wooden mockup in his Västervik workshop, assessing bunk clearance, seated headroom, and hatch latches for his ocean test boat.
Mockup – No Ballast, Deckhouse Buoyancy for Self Righting
Sven Yrvind

Mockup – No Ballast, Deckhouse Buoyancy for Self Righting

Inside his Västervik workshop, Sven Yrvind builds interior mockups for his 4.5-meter test boat, testing a stacked two-level living layout and deckhouse reserve buoyancy for self-righting stability without heavy ballast.
The two bulkheads weakly installed.
Sven Yrvind

The two bulkheads weakly installed.

Sven Yrvind evaluates two bulkhead retainer techniques and installs temporary fillets to mock up the cabin layout using oriented strand board in his Västervik workshop.
The Outer Coaming and Fiberglassing the Inner One.
Sven Yrvind

The Outer Coaming and Fiberglassing the Inner One.

Sven Yrvind fits the outer spray skirt coaming and laminates fiberglass onto the inner coaming in his workshop, refining his rope attachment setup and filleting the joint defenses.
Browse All Videos
WeBoating
Logo
Shopping cart