Restoring Our Sailboat’s Aluminum | Nyalic Finish & a Scary Accident in the Boatyard Ep. 56 #refit

Book a trip where this was filmed — near Annapolis

Support Sailing Roam

At WeBoating.com, we profoundly acknowledge the unwavering dedication that Sailing Roam invests in crafting each and every video or voyage. Their passion for delivering exceptional ocean content shines through every frame, and it's a labor of love that deserves your attention.

We invite you to watch their captivating videos here and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.

We're also inviting you to explore the gear, sponsorships, and boat partnerships highlighted in the "Restoring Our Sailboat’s Aluminum | Nyalic Finish & a Scary Accident in the Boatyard Ep. 56 #refit" video description, or directly on YouTube. By engaging with these offerings or purchasing services and items, you directly support Sailing Roam, their collaborators, and the brands they're associated with.

To ensure you never miss an offshore update, consider visiting their official YouTube Channel to subscribe, like, and join their community directly.

If you have any feedback, corrections, or additional information about Sailing Roam or their videos, please use the comment form below to share your thoughts with us.

Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!

Join us as we finish one of the biggest jobs aboard — refinishing all the aluminum on our sailboat, including the mast, boom, crossbeam, spreaders, and davits. We’re using a professional metal conditioning power tool and a unique product called Nyalic — a clear coating not often seen in the yachting world. Most aluminum masts are painted or anodized, but Nyalic offers a long-lasting, UV-resistant finish that’s easier to apply and far less expensive than paint.
Things didn’t go as planned: on the day we were set to finish the mast, Shawn had a serious pressure washer accident, sending us to the hospital for emergency surgery to prevent infection and compartment syndrome. The next day, Geri returned to the boat to finish the job alone — a tough day’s work ending just as the sun went down.
If you’re considering how to protect or restore your aluminum spars, this video covers everything from metal prep and conditioning to real-world lessons about safety, teamwork, and life aboard.

Nyalic:
https://www.nyalic.com/

☝More about us, our adventures, and how we do all this on our website.

More about Roam here
⛵️https://sailingroam.com/our-sailboat/

📲 Keep up with us on social
FACEBOOK: https://facebook.com/sgsailingroam
INSTAGRAM: https://instagram.com/sailing_roam
-----------------------------------------------------------
WE'RE GERI AND SHAWN. A couple travelers out chasing the horizon, meeting the people, and capturing it to share with you.

We’ve chosen to Roam the world by boat because, let’s face it, the most interesting path is rarely a straight line.

As we learn to let go of our American drive to finish, and embrace the meandering routes across islands, oceans, continents, and people, we hope to gain a better sense of our world and our place in it.

The path won’t always be comfortable or easy to find but, it will always #roam

Here's an index of the video in case you want to see something specific:

00:00 Intro clips
00:28 Channel intro
00:46 Explain new tool and start conditioning spreaders
02:13 Prep and spray spreaders with Nyalic
05:41 Condition boom
06:28 Condition mast
06:39 Start mast prep for Nyalic
07:51 Shawn is injured
07:57 1st ED visit
08:28 2nd ED visit
09:01 Geri returns to complete the project
09:08 Geri describes injury
11:15 What needs to happen today
13:15 Set up the frame/arches
18:36 Get the plastic off the boat and over the arches
22:02 Minor meltdown
23:35 Last ditch effort
24:12 Final preparation
25:17 Apply Nyalic…finally!
25:50 Done
26:55 Shawn’s out of the hospital
27:45 Remove plastic
27:59 Wrap up
28:22 Like and subscribe
28:47 End Card

-----------------------------------------------------------
#SailingLife #BoatMaintenance #AluminumRestoration #Nyalic #SailingCouple #CruisingLife #DIYBoatRepair #SailboatRefit

© Sailing Roam 2025

Restoring Our Sailboat’s Aluminum | Nyalic Finish & a Scary Accident in the Boatyard Ep. 56 #refit Location

  • Mathews (37.437006,-76.3206618)

Latest Episodes from Sailing Roam

Explore the most recent voyages. Subscribe to the channel to never miss an update!

Showing 1-6 of 152 results
Live update! On our way south…
Sailing Roam

Live update! On our way south…

Underway off the North Carolina coast, Geri on Sailing Roam contends with unexpected 25-knot winds, rolling swells, and a rogue wave that overturned their refrigerator, forcing route changes between Hatteras, Beaufort, and Wrightsville Beach.
We Asked Sailors What They Bought at the Boat Show  Ep 81 #annapolisboatshow
Sailing Roam

We Asked Sailors What They Bought at the Boat Show Ep 81 #annapolisboatshow

Geri and Shawn walk the docks at the Annapolis Sailboat Show to ask sailors what they bought, check out the Jonbuoy recovery module and Sea Level 11 tank monitors, and share their own Spinlock and Arco 48V upgrades for Roam.
Sailing Roam Live at Annapolis Sailboat Show 2026
Sailing Roam

Sailing Roam Live at Annapolis Sailboat Show 2026

At the Annapolis Sailboat Show, Geri and Shawn of Sailing Roam tour the busy docks, connect with exhibitors and fellow cruisers, and outline preparations to migrate south.
How We Explored Annapolis for Little or No Money  Ep80
Sailing Roam

How We Explored Annapolis for Little or No Money Ep80

One of our favorite things about cruising is exploring the places we visit without spending a fortune. So while we’re in Annapolis, we set out to see how much of this historic city we could experience for little or no money. First up was a self-guided walking tour of the U.S. Naval Academy. Seeing ...
We Have to Get Off the Boat | When Boat Projects Wear You Down  Ep79 #liveaboardlife
Sailing Roam

We Have to Get Off the Boat | When Boat Projects Wear You Down Ep79 #liveaboardlife

After two years of working on ROAM, we thought we’d be thrilled to spend our days fixing things, finishing projects, and getting the boat ready to cruise. Turns out… we’re tired. We’re restless, we’re tired of boat projects, and we desperately need to get off the boat for something more than our u...
We Replaced Our Rusty Anchor Chain With Stainless Steel—Here’s Why Ep. 78 #Cromox
Sailing Roam

We Replaced Our Rusty Anchor Chain With Stainless Steel—Here’s Why Ep. 78 #Cromox

After two years in the boatyard, we’re finally tackling one of the nastier pieces of old equipment aboard ROAM: our rusty, galvanized anchor chain. We’re replacing it with Cromox stainless steel anchor chain, and in this episode we take you through the entire process—from removing the old chain and...
Browse All Videos
WeBoating
Logo
Shopping cart