OVERHEATING inboard engine- MYSTERY SOLVED! Broken VHF radio and a FUN with one of OUR SUBSCRIBERS.

Lee and his crew moor Good Deeds in Le Lavandou, repairing a broken anchor chain link and diagnosing a snapped zinc anode blocking their heat exchanger.

Completing a thirty-seven-hour open-water crossing from Corsica to the French mainland, Lee and his crew moored their cruising yacht Good Deeds inside the historic basin of Port de Le Lavandou. Documenting the stopover on Good Deeds Sailing, the five-night marina stay was dedicated to essential mechanical overhauls, including ground tackle repairs, VHF radio wiring, and diagnosing intermittent engine overheating.

Before investigating propulsion issues, the crew addressed their ground tackle. A temporary shackle installed on the rode had begun to show surface wear, prompting Lee to grind off a damaged chain link and insert a ten-millimeter stainless steel quick link into the eight-millimeter galvanized chain:

“It’s a good time to see how far it’s corroded. See there’s nothing. Still so much strength. Yeah, this one is good. Yeah. This shackle been in the water for about four five weeks. And that’s supposedly standing still. Okay, so now we are cutting 10 mm link.”

With the splice secured, the crew calibrated their anchor chain, confirming twenty-five meters of chain rode available in the locker. Attention then shifted to their fixed VHF marine radio, which could receive incoming transmissions but failed to transmit. Stripping the microphone lead revealed fractured internal wires. Lee re-soldered the contacts, insulated the junction with heat-shrink tubing, and confirmed transmission with harbor officials upon their return from lunch.

The tranquility of the marina was interrupted early one morning when an unwelcome nocturnal visitor boarded the yacht:

“Last night we had a visitor uh about 5:00 a.m. We had a noise. Um it looks like it’s a rat. Uh he came and ate my tomato. Look at this. Actually, only ate inside of the tomato. And we think it got inside the boat as well because look, we found the crackers.”

The crew noted that when their beloved late dog PJ was on board, rodents never dared approach the vessel.

Solving Heat Exchanger Blockage from Snapped Zinc Anode

Departing the marina berth for sea trials, the inboard auxiliary engine began puffing white steam from the exhaust elbow, indicating severe raw water cooling starvation. Lee dropped anchor outside the fairway to investigate the raw water cooling circuit. While the sea strainer was clear and the raw water pump impeller remained intact, cooling water discharge remained intermittent:

“The anode that’s inside that pencil anode has moved. Okay. So what’s happened a while ago the anode went inside. Yeah, snapped. Snapped, and went inside of what? Inside the heat exchanger. Okay, and you think it’s I think it’s moved and it’s partially blocked it. Mhm. And now it may have moved again, so it’s okay.”

Removing the heat exchanger end caps, Lee extracted fragments of a deteriorated pencil zinc that had sheared off inside the cooling matrix. Lodged against internal tube bundles, the loose zinc had randomly blocked cooling water flow under load. After flushing the housing and clearing debris, cooling water gushed steadily from the transom exhaust.

Day Sailing with Theresa and Regional Festivities

With engine cooling restored, the crew welcomed their visiting subscriber Theresa aboard for a celebratory day sail across the bay. Under a reefed mainsail and genoa, Good Deeds tracked swiftly in twelve knots of steady coastal breeze, logging six knots over the ground while heeling comfortably in gusts reaching seventeen to nineteen knots:

“We have some nice wind today. Yeah, it’s not bad. No. It’s okay wind. 17 knots earlier. Yeah. Steady 12. Uh just like you said, we had a gust of 17 knots. That’s why we are on a reefed main. Yeah. And just because we only went out for a couple of hours, so we don’t It’s a fun sail today.”

Returning to port, the crew explored the historic village of Le Lavandou, taking in a regional heritage festival showcasing artisan pottery, traditional saffron preparation, and local lavender distillation ahead of an impending mistral gale.

Frequently Asked Questions

What caused the auxiliary engine overheating on Good Deeds?

A pencil zinc anode had snapped off inside the heat exchanger, with loose zinc fragments tumbling into the tube bundles and intermittently blocking raw cooling water flow.

How did Lee repair the anchor chain in Le Lavandou?

Lee cut out a deformed link from the 8 mm chain and installed a 10 mm stainless steel quick link to establish a reliable connection to the anchor.

Why did the fixed VHF radio fail to transmit?

The internal microphone copper wires had sheared inside the handset cable; Lee repaired the connection with fresh soldering and heat-shrink tubing.

What sailing conditions were encountered during the day sail with Theresa?

The crew sailed under a reefed mainsail in 12 knots of steady wind with gusts reaching 17 to 19 knots, reaching speeds of 6 knots across the bay.

Book a trip where this was filmed — near Cannes

Support Good Deeds Sailing

At WeBoating.com, we profoundly acknowledge the unwavering dedication that Good Deeds Sailing invests in crafting each and every video or voyage. Their passion for delivering exceptional ocean content shines through every frame, and it's a labor of love that deserves your attention.

We invite you to watch their captivating videos here and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.

We're also inviting you to explore the gear, sponsorships, and boat partnerships highlighted in the "OVERHEATING inboard engine- MYSTERY SOLVED! Broken VHF radio and a FUN with one of OUR SUBSCRIBERS." video description, or directly on YouTube. By engaging with these offerings or purchasing services and items, you directly support Good Deeds Sailing, their collaborators, and the brands they're associated with.

To ensure you never miss an offshore update, consider visiting their official YouTube Channel to subscribe, like, and join their community directly.

If you have any feedback, corrections, or additional information about Good Deeds Sailing or their videos, please use the comment form below to share your thoughts with us.

Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!

While in Le Lavandou marina, we take one of our subscribers out for a sail around the bay. Crack on with a few urgent repairs ; finally fixing our broken anchor chain, solving the mystery of our overheating engine and getting our VHF radio working again, before we can safely leave for Etang de Berre.


Thank you to all our subscribers, our lovely Good Deeders :)
Please like, share, comment, we love your feedback.

please check out:

OUR APP- SAILORSBAY
https://www.sailorsbay.app

MAD ABOUT TEETH- Family Colouring Book is available on Amazon :D
Amazon UK
https://amzn.eu/d/ckXecDR

Amazon Polska
https://amzn.eu/d/85zD2wE

and other countries! :D

You can support us by:
buying us a coffee on :
https://ko-fi.com/gooddeedssailing

donating through PayPal:
https://paypal.me/gooddeedssailing

You can also join us and become a member to help us continue our journey, CHECK OUT our YouTube membership "In PJ's Memory" :D

Thank you for watching @gooddeedssailing and your support, we are so glad you enjoy our videos :)

Lee and Karolina :)

OVERHEATING inboard engine- MYSTERY SOLVED! Broken VHF radio and a FUN with one of OUR SUBSCRIBERS. Location

  • Port de Le Lavandou, Var, France (43.137,6.371)
We will be happy to hear your thoughts

Leave a reply


Latest Episodes from Good Deeds Sailing

Explore the most recent voyages. Subscribe to the channel to never miss an update!

Showing 1-6 of 206 results
OVERHEATING inboard engine- MYSTERY SOLVED! Broken VHF radio and a FUN with one of OUR SUBSCRIBERS.
Good Deeds Sailing

OVERHEATING inboard engine- MYSTERY SOLVED! Broken VHF radio and a FUN with one of OUR SUBSCRIBERS.

Lee and his crew moor Good Deeds in Le Lavandou, repairing a broken anchor chain link and diagnosing a snapped zinc anode blocking their heat exchanger.
A 116 miles NIGHT SAIL from CORSICA to the mainland FRANCE.
Good Deeds Sailing

A 116 miles NIGHT SAIL from CORSICA to the mainland FRANCE.

Good Deeds Sailing departs Petit Golfe de Topidi in Corsica for a 37-hour, 116-nautical-mile passage to Le Lavandou, France, navigating calm seas, night watches, and an unexpected radio query.
A SUMMER SAIL, Sardinia to Corsica. FASTEST speeds YET!
Good Deeds Sailing

A SUMMER SAIL, Sardinia to Corsica. FASTEST speeds YET!

Good Deeds Sailing departs Asinara Island at dawn, sailing across to southwest Corsica aboard their Westerly Berwick 31 ketch, reaching speeds of 6.2 knots in 17 knots of wind before dropping anchor in 6 meters.
Walking among the RUINS of ASINARA: SKELETONS, wild donkeys and ABANDONED PRISONS.
Good Deeds Sailing

Walking among the RUINS of ASINARA: SKELETONS, wild donkeys and ABANDONED PRISONS.

Lee and Karolina of Good Deeds Sailing explore the abandoned penal colony and ossuary ruins on Asinara Island before setting sail on an early morning passage to Corsica.
We sail to ABANDONED PENAL COLONY- ASINARA Island, home of the white donkeys.
Good Deeds Sailing

We sail to ABANDONED PENAL COLONY- ASINARA Island, home of the white donkeys.

Lee and Karolina sail their Westerly Berwick 31 from Porto Torres to Asinara Island in north Sardinia, picking up a national park mooring buoy to explore nine former prisons, Neolithic rock dwellings, and wild white donkeys.
We TIMED IT WRONG leaving the marina.
Good Deeds Sailing

We TIMED IT WRONG leaving the marina.

Lee and Karolina service their Beta Marine 25 diesel, install upgraded solar panels, and face heavy breaking seas attempting to depart Marina del Cormorano in Sardinia.
Browse All Videos
WeBoating
Logo
Shopping cart