Watch Sailing & Boating Adventures Around the World – Page 51 of 60
Explore sailing, boating, and water sports through our curated video archive. From epic sea voyages to serene diving escapes, discover unforgettable adventures from top YouTube creators. Start your journey. Dream big. Sail far.
Showing 1201-1224 of 1422 results
Salt & Tar: Episode 63-Busted Back and Metal Scrap
Garrett has had continuous back problems. Blame it on pour genes or the relentless work he puts his body through. He's learned the hard way that every once in a while he's got to take it easy! With a simple light task like shopping for materials for the boat and glueing just one piece of t...
Shaping the Keel / Adze work (EP59)
Rebuilding a historic sailing yacht – Shaping the Keel / Adze work (EP59) Support; Become a Patron; ----- EPISODE 59. In this episode, after roughing-out the starboard side Rabbet into the Stem, I make a jig to transfer the measurements for the shape of the Keel Timber from the lofting floor to...
Acorn to Arabella – Journey of a Wooden Boat – Episode 86: Boring!
Need to drill a big hole?... BORING! That's right, we are final to the point of boring out the stern post for our prop shaft. We were very much looking forward to this set up and seeing how this works. We put together a setup that included a long boring bar with multiple different cutter atta...
Acorn to Arabella – Journey of a Wooden Boat – Bonus Content: SAILCARGO Invasion
We'd like your help! We've made some very good friends these past years via the project. A lot of which are doing some very cool things. At the last WoodenBoat Show at Mystic Seaport, we met up with a group of them and hatched a plan. Our friends at SAILCARGO have set up a ship yard in C...
Casting Bronze Boat Hardware- From Pattern Making to Test Sail
Casting bronze grabrail brackets and whisker strut padeyes for the Atkin Ingrid ketch Julia. Test sail in Elliot Bay, Puget Sound.
Emily Builds a Sailboat – THE BOAT MUST GO ON! – CLC Eastport Nesting Pram (Ep 3)
THE BOAT MUST GO ON! Following last week's big mistake, we decide to move forward with the basic parts of the build until we have the proper plans. In this video, we review what changes need to be made. Then Emily begins the "glue" part of the stitch-and-glue method---applying epoxy ...
Acorn to Arabella – Journey of a Wooden Boat – Episode 85: Glue Failure
With a project like this, there are always going to be ups and downs. The key is trying to stay up beat and finding a way around the road bumps. We've been greatly slowed down this summer by the work of figuring out the prop shaft assembly which has required a lot of machining which we needed ...
Salt & Tar: Episode 62-Playing Hooky
Special thanks to Ron for taking us out to the Farallons aboard his Ericson 38, Spellbound. It was a very welcomed distraction from the seemingly never ending boat projects ;) Thanks for watching everyone! Many thanks and much love, Ruthie a HUGE thank you to everyone that has purchased item...
Ship of Theseus / Project Recap! (EP58)
Rebuilding a historic sailing yacht – Ship of Theseus / Project Recap Support; Become a Patron; ----- EPISODE 58. In this episode, I ask the question “is Tally Ho still the same boat?” ...I explore the ancient philosophical question of The Ship of Theseus, and how that problem applies to this p...
Emily Builds a Sailboat – STITCH THE PLANKS – CLC Eastport Nesting Pram (Ep 2)
Girls can build stuff, too! Support this and other projects via our Patreon page: In this video, Emily uses wire to "stitch" together the planks, hull, and transoms of the Eastport Pram to create its shape and prepare it for "glue," aka epoxy. But halfway through, we realize we...
Acorn to Arabella – Journey of a Wooden Boat – Episode 84: Lining Off and Diminishing Board
While we take a break from the prop shaft assembly to let Joe finish milling the Delrin liner and the other components, we get back to some planking. As soon as the prop shaft assembly is installed in the stern post, we will be able to hopefully get moving on installing the rest of the planking. In...
Acorn to Arabella – Journey of a Wooden Boat – Episode 83: Riveting Test and Prop Shaft Assembly
Sometimes, boatbuilding is all about big showy pieces coming together. But much of the time it is also working with small details. This week, we focus on some of these details that we are going to have to figure out before we move on from the prop shaft assembly that is still coming together. Joe ...
Salt & Tar: Episode 61-Boatyard Summer
Thankfully this episode is only hours behind when I normally upload and not days. Garrett scrambled and hooked up one of our solar panels so I could keep working on this video during the odd power outage in Napa. The bowsprit is finished up to where we planned on getting it during this haul out as...
WOODEN BOAT REBUILD – Shaping the Cutwater / More Timber! (EP57)
Rebuilding a historic sailing yacht – Shaping the Cutwater / More Timber! Support; Become a Patron; ----- EPISODE 57. In this episode, I cut the rest of the shape of the Cutwater into the Stem, using a chainsaw. Then I plane it smooth, and shape the transition to the square stem-head with a gri...
Acorn to Arabella – Journey of a Wooden Boat – Episode 82: Working on Prop Shaft Fittings
We are getting farther up the hull with the planking and as we do so, we are nearing the point at the stern where the propeller shaft will go through. We need to get this hole bored before we plank past it because we are going to need to be able to align our bore perfectly level (our shaft is level...
Emily Builds a Sailboat – PART 1 – CLC Eastport Nesting Pram
Girls can build stuff, too! Support this and other projects via our Patreon page: Over the next two months, Emily is building a lightweight wooden boat, which will be used as a sailing, rowing, and motoring dinghy for S/V Temptress. This model is an Eastport Nesting Pram (plans by Chesapeake Light...
Acorn to Arabella – Journey of a Wooden Boat – Episode 81: Sawn Frames and Cedar Rack
Completing Arabella's hull is something we are eagerly striving for. With this installment we cross a milestone in that goal. All of Arabella's frames that can currently go in, are finally installed. Once we have completed the planking process, the last seven sets of frames (currently b...
Salt & Tar: Episode 60-Carving the Bowsprit
Garrett did a majority of the filming for this episode! I was stressing about whatever video I was working on at the time but Garrett crushed it and nearly finished the bowsprit in the time it took me to finish the episode haha It looks so great and can't wait to get the hardware made so we can...
Roughing-out the Stem / Timber Decisions (Tally Ho Ep 56)
Rebuilding a historic sailing yacht – Roughing-out the Stem / Timber Decisions Support; Become a Patron; ----- EPISODE 56. After the busyness of the Frame-raising, it’s just me and the boat again for a while. I have some tough decisions to make as I look into ordering the timber for the deck-st...
Acorn to Arabella – Journey of a Wooden Boat – Episode 80: Sawn Frames and Bronze Floors
In last week's episode, we went into detail about how we are fabricating the forward sawn floors. From how we are taking measurements using tick sticks and a template to how we are cutting our rolling bevel down the frames without a ship's saw. In this episode we get into more of that wor...
Acorn to Arabella – Journey of a Wooden Boat – Episode 79: Making Sawn Frames
We've done steam bent frames for the majority of Arabella, now, in the stem and the stern, it's time to make some sawn frames. Where the bow and stern come in to the centerline timbers, the shape of the hull is fairly sharp. Steam bending frames in these areas would not be very easy nor i...
Salt & Tar: Episode 59- Deck Planking
Thanks for watching everyone! Many thanks and much love, Ruthie a HUGE thank you to everyone that has purchased items off our wishlist. You are giving us a big step forward in the projects to come. We've never had such nice tools. You all are amazing, beautiful, wonderful people that we a...
Finished Framing! / Planking Timber (TALLY HO EP55)
Rebuilding a historic sailing yacht – Finished Framing! / Planking Timber Support; Become a Patron; ----- EPISODE 55. Tally Ho is fully re-framed! In this episode we see the final part of the frame-raising party, as we make and install the last of the frames that make up the bow of the boat. We...