Why balanced lug sail rig for Exlex.

Wave Rover have suggested that I chose junk rig for my boat. Here is is the text for those who have problems understanding my muttering: Rigs junk, Ljungström balansed lug. Wave Rover suggested the junk rig. I have considered the junk rig. In my case what speaks against it is that I am not familiar with it. Also the junk sail is tied to the mast, I prefer the balanced lug that is only attached to the mast by the halyard. That makes it is easy to lower the yard, boom and sail and put the bundle on deck. In strong winds that reduces the wind resistance. Also the junk sail is sheeted from a point aft the sail. That makes it difficult to find a point for the sheet on deck. The balanced lug do not have that problem. It can be sheeted from a point below the boom. Then there is the battens. I worry that they may break. True I can have many spare ones, still it is a disadvantage that have to be considered. The Ljungström rig is good on the wind, but triangular sails have the worst planform. With vertical battens it can be solved but it complicates it. Downwind it is complicated to put out a whisker poole and its boom vang. The small balanced lug can be easily reefed. Ordinary it will only take one or two minutes therefore there is no reason for me to change to junk rig because ease of reefing. The area of each of my sails is only 2.7 square meter and I do not think I will reef often as it is very easy just to drop one or two of the three sails. For more about my projects see Yrvind.com There you can also support me by donations via Pay pal and Swish 0706 200 550

Wave Rover have suggested that I chose junk rig for my boat.
Here is is the text for those who have problems understanding my muttering:
Rigs junk, Ljungström balansed lug.
Wave Rover suggested the junk rig.

I have considered the junk rig.
In my case what speaks against it is that I am not familiar with it.

Also the junk sail is tied to the mast, I prefer the balanced lug that is only attached to the mast by the halyard. That makes it is easy to lower the yard, boom and sail and put the bundle on deck. In strong winds that reduces the wind resistance.
Also the junk sail is sheeted from a point aft the sail. That makes it difficult to find a point for the sheet on deck.
The balanced lug do not have that problem. It can be sheeted from a point below the boom.
Then there is the battens. I worry that they may break. True I can have many spare ones, still it is a disadvantage that have to be considered.

The Ljungström rig is good on the wind, but triangular sails have the worst planform. With vertical battens it can be solved but it complicates it.
Downwind it is complicated to put out a whisker poole and its boom vang.

The small balanced lug can be easily reefed. Ordinary it will only take one or two minutes therefore there is no reason for me to change to junk rig because ease of reefing. The area of each of my sails is only 2.7 square meter and I do not think I will reef often as it is very easy just to drop one or two of the three sails.
For more about my projects see Yrvind.com
There you can also support me by donations via Pay pal and Swish 0706 200 550

Support Sven Yrvind

At WeBoating.com, we profoundly acknowledge the unwavering dedication that Sven Yrvind invests in crafting each and every video or voyage. Their passion for delivering exceptional ocean content shines through every frame, and it's a labor of love that deserves your attention.

We invite you to watch their captivating videos here and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.

We're also inviting you to explore the gear, sponsorships, and boat partnerships highlighted in the "Why balanced lug sail rig for Exlex." video description, or directly on YouTube. By engaging with these offerings or purchasing services and items, you directly support Sven Yrvind, their collaborators, and the brands they're associated with.

To ensure you never miss an offshore update, consider visiting their official YouTube Channel to subscribe, like, and join their community directly.

If you have any feedback, corrections, or additional information about Sven Yrvind or their videos, please use the comment form below to share your thoughts with us.

Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!

Latest Episodes from Sven Yrvind

Explore the most recent voyages. Subscribe to the channel to never miss an update!

Showing 1-6 of 1993 results
Mockup – No Ballast, Deckhouse Buoyancy for Self Righting
Sven Yrvind

Mockup – No Ballast, Deckhouse Buoyancy for Self Righting

This Youtube channel is about me Sven Yrvind. I am 87 and a half years old dyslectic solo sailor. I am building a plywood test boat for a Divinycell and NM-epoxy high-latitude cruiser. She will be about 4.5 meter or 14 feet and 9 inches long, the beam 1.36 meter, 4 feet 6 inches. She is a two mas...
The two bulkheads weakly installed.
Sven Yrvind

The two bulkheads weakly installed.

This Youtube channel is about me Sven Yrvind. I am 87 and a half years old dyslectic solo sailor. I am building a plywood test boat for a Divinycell and NM-epoxy high-latitude cruiser. She will be about 4.5 meter or 14 feet and 9 inches long, the beam 1.36 meter, 4 feet 6 inches. She is a two mas...
The Outer Coaming and Fiberglassing the Inner One.
Sven Yrvind

The Outer Coaming and Fiberglassing the Inner One.

Sven Yrvind fits the outer spray skirt coaming and laminates fiberglass onto the inner coaming in his workshop, refining his rope attachment setup and filleting the joint defenses.
Starting the Inner of Two Spray Skirt Coamings.
Sven Yrvind

Starting the Inner of Two Spray Skirt Coamings.

Sven Yrvind works in his workshop cutting and fitting inner and outer spray skirt coamings, detailing kerf measurements and fiberglass reinforcement.
Cutting the Divinycell Bulkheads.
Sven Yrvind

Cutting the Divinycell Bulkheads.

In his Västervik workshop, Sven Yrvind shapes composite bulkheads and constructs rounded hatch coamings with dual spray protection for his compact ocean cruiser, verifying hull symmetry and deck crown alignment.
Laminating the Two Bulkheads.
Sven Yrvind

Laminating the Two Bulkheads.

Sven Yrvind numbers and lays out fiberglass cloth before laminating two bulkheads with epoxy resin in his Västervik workshop for his 4.5-meter high-latitude cruiser test boat.
Browse All Videos
WeBoating
Logo
Shopping cart