Twin keels in the outside skin, good idea or unsafe ?
Sven Yrvind
At 86, Sven Yrvind is still pushing the limits of small-boat design. Discover the philosophy and technical grit behind his 'Exlex' series.
Channel Information:
Social Media Links:
Support Sven Yrvind
At WeBoating.com, we profoundly acknowledge the unwavering dedication that Sven Yrvind and other creators invests in crafting each and every video. Their passion for delivering exceptional content shines through every frame, and it's a labor of love that deserves your attention.
We invite you to watch their captivating videos and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.
We're also inviting you to explore any sponsorships and partnerships highlighted in the "Twin keels in the outside skin, good idea or unsafe ?" video description, or directly on YouTube. By considering their offerings or purchasing services and items, you not only support Sven Yrvind but also the brands and collaborators they're associated with.
If you have any feedback, corrections, or additional information about Sven Yrvind or their videos, please use the comment form below to share your thoughts with us.
Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!
In the comments some asked how I intended to attach the twin keels.
1986 I buildt my first boat of Divinycell and NM-epoxy.
She had a bow centerboard and a 150 kilo bronze shallow keel.
she was 4.8 meter long 15 feet. I sailed her from France to Ireland and then to Newfoundland.
I had screwed and glued the bronze keel to the outer laminate.
Many people were sceptical not only to my planned route but also to screwing the keel to the outside laminate.
Contemporary dogma then as now is to use keelbolts that traverse the hull to frames or ribs.
My method is much safer.
The engenering principle in structures is to spread out the load as much as possible.
Keelbolts do the opposite they concentrate the load bring it inside the boat then they try to spread it out with the helps of frames again.
My method is safer and more direct.
For more see Yrvind.com
There you can also support my project via Pay pal and Swish 0706 200 550
Sven Yrvind Lastest Videos
My solution to Crossing the Doldrums, without Using a Engine.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
Goose Barnacles Remower.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
Berth restraint belts.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
Cutting Charts down to fit Stowage Compartment.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
754 kilos & young subscriber.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...