Failed to solve the hatch problem. I do that later now the rudder pattern
Sven Yrvind
At 86, Sven Yrvind is still pushing the limits of small-boat design. Discover the philosophy and technical grit behind his 'Exlex' series.
Channel Information:
Social Media Links:
Support Sven Yrvind
At WeBoating.com, we profoundly acknowledge the unwavering dedication that Sven Yrvind and other creators invests in crafting each and every video. Their passion for delivering exceptional content shines through every frame, and it's a labor of love that deserves your attention.
We invite you to watch their captivating videos and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.
We're also inviting you to explore any sponsorships and partnerships highlighted in the "Failed to solve the hatch problem. I do that later now the rudder pattern" video description, or directly on YouTube. By considering their offerings or purchasing services and items, you not only support Sven Yrvind but also the brands and collaborators they're associated with.
If you have any feedback, corrections, or additional information about Sven Yrvind or their videos, please use the comment form below to share your thoughts with us.
Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!
I tried my new hatch Idea. It did not work. Reason it will build to much height. Also hinges on each side with removable pins wont work either. For two reasons. One the center of the pins have to be outside the gasket. The gasket is 30 mm the there is the holder of the gasket 20 mm on each side maybee so about 70 mm. Those 70 mm will be outside the pin and prevent turning the hatch.
There is also a problem with hinges in that it limits the movement of the hatch to dig into the gasket.
The problem will be in the back of my mind. A solution will be there when I get to it in full scale.
Meanwhile I work on the pattern for the bronze rudder. Step by step I glue her up. A third gluing will be done tomorrow.
No problem is difficult if you divide it into small steps.
For more see Yrvind.com
There you can support my project with donations via Pay pal and Swish 0706 200 550
Sven Yrvind Lastest Videos
My solution to Crossing the Doldrums, without Using a Engine.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
Goose Barnacles Remower.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
Berth restraint belts.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
Cutting Charts down to fit Stowage Compartment.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
754 kilos & young subscriber.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...