Bronze screws for the bronze keel for compatibility
Sven Yrvind
At 86, Sven Yrvind is still pushing the limits of small-boat design. Discover the philosophy and technical grit behind his 'Exlex' series.
Channel Information:
Social Media Links:
Support Sven Yrvind
At WeBoating.com, we profoundly acknowledge the unwavering dedication that Sven Yrvind and other creators invests in crafting each and every video. Their passion for delivering exceptional content shines through every frame, and it's a labor of love that deserves your attention.
We invite you to watch their captivating videos and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.
We're also inviting you to explore any sponsorships and partnerships highlighted in the "Bronze screws for the bronze keel for compatibility" video description, or directly on YouTube. By considering their offerings or purchasing services and items, you not only support Sven Yrvind but also the brands and collaborators they're associated with.
If you have any feedback, corrections, or additional information about Sven Yrvind or their videos, please use the comment form below to share your thoughts with us.
Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!
I now have good silicon bronze screws for the tin bronze keels. There is no galvanic difference between tin bronze and silicon bronze. They are compatible.
Also the bronze screws are twice as long as the stainless steel screw I use for the test. In fact it was 10 weights of 14 kilo it took to load the screw to failure. Now the screw is twice as long it will be set in a much thicker laminate. For the test I had not more than 3 layers might even be less. For the real thing it is going to be more than 12 layers.
Also for each screw I am going to create a small cavity and fill it with NM infusion epoxy spreading out the load and gluing them to the 70 mm thick Divinycell.
There will 100 screws for the two keels. I estimate that there will be more than 25 tons to failure due to the screws in addition to this is the elastic NM epoxy. Guess is that it will add even more strenght.
I do not worry.
For more see Yrvind. com
There you can also support my project via Pay pal and Swish 0706 200 550
Sven Yrvind Lastest Videos
My solution to Crossing the Doldrums, without Using a Engine.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
Goose Barnacles Remower.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
Berth restraint belts.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
Cutting Charts down to fit Stowage Compartment.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
754 kilos & young subscriber.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...