26 September 2022 Making a superflat base for the gasket.
Sven Yrvind
At 86, Sven Yrvind is still pushing the limits of small-boat design. Discover the philosophy and technical grit behind his 'Exlex' series.
Channel Information:
Social Media Links:
Support Sven Yrvind
At WeBoating.com, we profoundly acknowledge the unwavering dedication that Sven Yrvind and other creators invests in crafting each and every video. Their passion for delivering exceptional content shines through every frame, and it's a labor of love that deserves your attention.
We invite you to watch their captivating videos and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.
We're also inviting you to explore any sponsorships and partnerships highlighted in the "26 September 2022 Making a superflat base for the gasket." video description, or directly on YouTube. By considering their offerings or purchasing services and items, you not only support Sven Yrvind but also the brands and collaborators they're associated with.
If you have any feedback, corrections, or additional information about Sven Yrvind or their videos, please use the comment form below to share your thoughts with us.
Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!
The lid is already very flat me having sandpared them on my huge sandpaper on a flat steel plate.
Now matching that I am making the base for the gasket even flatter by gravity and infusion epoxy.
Pouring the epoxy in the gasket grove is all that is needed. Gravity dous the rest.
The NM infusion epoxy have very low viscosity and a long curing time ensuring that gravity will have enough time to work.
I put the base flat using a spirit level. Thats a beginning. Peter suggested that I put screws in the corner. That way I can adjust the level.
In fact no spirit level is needed. I realised that I can use the epoxy as a spirit level. If there is not enough epoxy in one part I just make it higher in the opposite and the epoxy will be coming flowing.
See also: yrvind.com for much more about my boats, voyages and adventures.
If you’re interested in contributing links are below.
https://www.paypal.com/donate?hosted_button_id=2MYSYADM4594Q
Swish 0706200550
Sven Yrvind Lastest Videos
754 kilos & young subscriber.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
The screw-on pour spout.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
All Milk powder, Almond meal and rolled oats stowed.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
Cleaning the Storage Compartments.
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...
Epoxying the knots of the Tails for the cotter pins that secure the lids of the storage compartments
This Youtube channel is about me Sven Yrvind. I am87 year and two months old dyslectic solo sailor. I am designing a high-latitude cruiser. She is a 5.2 meter long sandwich construction built with 30 mm Divinycell, polyester fiber and NM epoxy. Her beam ...