After decades ashore, TALLY HO begins new adventures - with a rowdy crew!

Following seven years of restoration work, Leo Goolden leads a San Juan Islands Shakedown Cruise aboard Tally Ho alongside Argonaut 2, navigating from Decatur Island to Sucia Island before bidding farewell to departing shipwrights.

Underway through the San Juan archipelago, Leo Goolden and the Sampson Boat Co crew cast off from their overnight raft-up with the motor yacht Argonaut 2, setting their sights on Decatur Island for the first leg of their northern shakedown voyage.

After completing an initial passage from Port Townsend, the crew enjoyed their first morning underway on the newly rebuilt vessel, coordinating headsail sheets and runner lines as the gaff cutter eased into open water alongside their cruising companion.

Setting Sails and a Forest Recovery Mission

As the crew prepared to gybe and set additional canvas, Leo directed hands on deck to back the staysail to starboard and set the running backstays forward. While maneuvering in the channel, an aerial camera drone operated by the production team took an unexpected detour into the timber along the shore. Leo characterized the incident as an “unintentional Landing experience in conjunction with the presence of a tree,” prompting the crew to coordinate an impromptu recovery expedition.

The camera operator explained the mishap during the sail: “I was flying kind of like a wide circle around Tallyho and strafed into these trees.” Fortunately, the aircraft dropped into a thick patch of moss rather than remaining suspended high in the canopy. Amber brought her Thunderbird sailboat tender alongside, ferrying Nick and the pilot ashore over the rocks to track down the beeping signal. Inspecting the machine on the forest floor, the recovery party found minor damage, reporting that “she broken arm but this whole assembly is replaceable so it’s not going to be much of a problem I don’t think.” With 3 of its 4 rotor arms fully intact, the team secured the drone, returned to the skiff, and rejoined the fleet to continue the passage.

Mooring at Decatur Island for a Community Gathering

Reaching Decatur Island, an isolated rural outpost in the San Juan Islands with neither commercial stores nor ferry access, Tally Ho secured alongside the community dock following an invitation from a local resident and friend. The arrival of the traditional cutter drew interest from islanders, providing the team an opportunity to welcome visitors aboard, guide them through the deck layout and interior spaces, and celebrate the milestone ashore.

The local residents welcomed the visitors with a community picnic on the island grounds, giving the shipwrights and sailors a welcome chance to unwind together. The stopover offered a relaxed pause before continuing through the eastern channels of the archipelago, marking one of the first times the entire build team could step back and experience the cutter as an active cruising vessel rather than a workshop project.

Cruising North to Sucia Island and Galley Traditions

Departing Decatur Island, Tally Ho pointed north through the eastern passages of the archipelago toward Sucia Island, an island renowned for protected anchorages and extensive coastal walking trails. Aboard Tally Ho, the crew marked the evening underway with an enchilada dinner, joking that the festive meal would serve as the ultimate operational trial for the newly installed marine head.

Once settled into a secure anchorage at Sucia Island, Tally Ho rafted alongside Argonaut 2, a 102-year-old wooden motor yacht built in 1922 and skippered by Nicholas. Having met Leo during a haulout a couple of years earlier, Nicholas joined the cruise to offer cruising support and additional bunk accommodations for the large contingent. The layover gave the team several days of downtime to explore hiking paths ashore, keep the decks and ground tackle spotless, and gather in Argonaut 2’s galley for an evening of fresh pasta production.

The galley quickly transformed into a lively production line as crew members pressed, cut, and shaped homemade tortellini. Banter flowed freely over folding technique and culinary pacing, with the crew observing the classic craftsman rule that when balancing speed, cost, and quality, “fast cheap or good you only pick two.” The evening concluded with heartfelt toasts thanking Nicholas for opening his ship, his galley, and his anchor gear to the Tally Ho company.

Crew Milestones and Vessel Tenures

The shakedown cruise brought together seasoned shipwrights, riggers, and sailors who had spent years reconstructing the cutter from her lead keel to her masthead. To document the collective effort aboard during this passage, key project milestones and vessel backgrounds are summarized below:

Vessel or Crew MemberRole on Shakedown VoyageDocumented Timeline
Tally HoAlbert Strange gaff cutter7 years of reconstruction
Argonaut 2Accompaniment wooden motor yacht102 years old built in 1922
GeorgeShipwright and woodworker2 years on project
PatrickShipwright and crewWorking on vessel since 2020
BobRigging specialist2 years on project

Departures Across the Strait of Juan de Fuca

After a week of shared cruising in the northern islands, the gathering drew toward a necessary close. Several core members of the reconstruction team prepared to return to Port Townsend, traveling aboard Amber’s Thunderbird sailboat, Best Day Ever. Amber needed to return her vessel south to resume scheduled sailing charters and school operations, anticipating a demanding passage of approximately 8 hours from the top of the island across the Strait of Juan de Fuca.

The impending departure prompted emotional reflections along the rail. Amber reflected on the week together, noting that “it has been such an amazing week getting to sail around with Tallyho” as she prepared to ferry crew members back across the strait. Erica, who managed the cutter’s onboard systems for a year and a half, shared her gratitude before casting off: “I’ve learned so much on this project and it’s been a life-changing experience.” Shipwright George, who contributed over 2 years of woodworking to the rebuild and planned to spend his summer restoring a vintage motorcycle in Port Townsend, expressed his appreciation to the supporters and community: “it has been an incredible trip and this whole experience has been a absolutely unbelievable learning experience.”

With warm hugs exchanged between the rafted hulls, the crew cast off the lines and watched the Thunderbird sail out of the cove toward the southern strait. Leo looked ahead to the next phase of the voyage, which will carry Tally Ho across the maritime border into Canadian waters, charting passages toward Vancouver Island and Haida Gwaii as the restored cutter begins her broader sea trials.

Frequently Asked Questions

What caused the aerial camera drone to crash during the sail?

While setting headsails and preparing to gybe, the drone operator flew a wide circle around Tally Ho and strafed into the tree canopy along the shoreline, breaking one rotor arm upon landing in the moss.

Which companion vessel traveled alongside Tally Ho in the San Juan Islands?

Tally Ho traveled in company with Argonaut 2, a 102-year-old wooden motor yacht built in 1922 and owned by Nicholas, which provided additional bunk accommodation and galley space for the build team.

What took place during Tally Ho’s visit to Decatur Island?

A local friend living on Decatur Island invited the crew to moor at the community dock, where Leo showed local residents aboard Tally Ho before joining them for a community picnic ashore.

What activities occupied the crew while anchored at Sucia Island?

Rafted together in Sucia Island’s protected anchorage, the team spent several days hiking forest trails, cleaning decks and anchors, and making fresh handmade tortellini in Argonaut 2’s galley.

Why did several core shipwrights disembark at Sucia Island?

Nick, George, Erica, and Amber sailed Amber’s Thunderbird boat back to Port Townsend on an eight-hour passage across the Strait of Juan de Fuca so Amber could resume commercial sailing charters and the crew could start personal projects.

Book a trip where this was filmed — near San Juan Islands

See all 15 experiences in San Juan Islands →

Support Sampson Boat Co

At WeBoating.com, we profoundly acknowledge the unwavering dedication that Sampson Boat Co invests in crafting each and every video or voyage. Their passion for delivering exceptional ocean content shines through every frame, and it's a labor of love that deserves your attention.

We invite you to watch their captivating videos here and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.

We're also inviting you to explore the gear, sponsorships, and boat partnerships highlighted in the "After decades ashore, TALLY HO begins new adventures - with a rowdy crew!" video description, or directly on YouTube. By engaging with these offerings or purchasing services and items, you directly support Sampson Boat Co, their collaborators, and the brands they're associated with.

To ensure you never miss an offshore update, consider visiting their official YouTube Channel to subscribe, like, and join their community directly.

If you have any feedback, corrections, or additional information about Sampson Boat Co or their videos, please use the comment form below to share your thoughts with us.

Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!

Support TALLY HO; http://www.sampsonboat.co.uk/support
Become a Patron; http://www.patreon.com/sampsonboatco


----

EPISODE 197

In this video we finally get to enjoy sailing Tally Ho after 7 years of work! We meet the whole crew - familiar faces, and a few new ones. We travel with a historic 1922 motor-yacht, we crash our drone in the woods, we make fresh pasta, and some of us say goodbye - for now.


——

To become a Patron - https://www.patreon.com/sampsonboatco

To donate or support - http://sampsonboat.co.uk/support

My Wishlist http://a.co/76y5IZP

For sneaky previews of what’s going on in between episodes, follow my
FACEBOOK http://www.facebook.com/sampsonboatco and
INSTAGRAM http://www.instagram.com/sampsonboatco.

MANY THANKS!

Music;
Home - JHS Pedals
Da Jazz Blues - Doug Maxwell / Media Right Productions
Juneberry Junction - Chris Haugen







Ep197

Latest Episodes from Sampson Boat Co

Explore the most recent voyages. Subscribe to the channel to never miss an update!

Showing 1-6 of 310 results
Winter rig upgrades… could Tally Ho actually win The Fastnet 100 years later?!
Sampson Boat Co

Winter rig upgrades… could Tally Ho actually win The Fastnet 100 years later?!

Leo Goolden prepares the 1910 gaff cutter Tally Ho for winter in the UK, detailing spar maintenance, bowsprit modifications, and safety upgrades for the Fastnet Race.
Getting my boat stuck in the mud
Sampson Boat Co

Getting my boat stuck in the mud

Support TALLY HO; Become a Patron; Wishlist; I this video I take Tally Ho to her winter home in a Cornish Boatyard - but along the way, we encounter shallows and deep mud! Music; Jesse Gallagher - Tuath Dé Dunsany Inaban - Sin Rumbo
Sailing through the “Needles”
Sampson Boat Co

Sailing through the “Needles”

Support TALLY HO; Become a Patron; Wishlist; Roy's original interview;
Sailing the British South coast!
Sampson Boat Co

Sailing the British South coast!

Support TALLY HO; Become a Patron; Wishlist; Music; Dan Lebowitz, Tone Seeker - Back in the Saddle Brooks Williams - Johnny's Farewell FACEBOOK and INSTAGRAM
Tally Ho meets a tidal mud-berth!
Sampson Boat Co

Tally Ho meets a tidal mud-berth!

Support TALLY HO; Become a Patron; Music; Wayward Jane - I’ve Endured Walls & Birds - Orion Walls & Birds - Kwabena
Tally Ho sails into England after 59 years overseas!
Sampson Boat Co

Tally Ho sails into England after 59 years overseas!

Support TALLY HO; Become a Patron; FACEBOOK and INSTAGRAM Video footage and thumbnail credit - Music; Dowally - Dark Clouds Wayward Jane - Brokeback Wayward Jane - Lyra’s Tune
Browse All Videos
WeBoating
Logo
Shopping cart