Watch Sailing & Boating Adventures Around the World – Page 29 of 33
Explore sailing, boating, and water sports through our curated video archive. From epic sea voyages to serene diving escapes, discover unforgettable adventures from top YouTube creators. Start your journey. Dream big. Sail far.
Showing 673-696 of 775 results
Acorn to Arabella – Journey of a Wooden Boat – Episode 83: Riveting Test and Prop Shaft Assembly
Sometimes, boatbuilding is all about big showy pieces coming together. But much of the time it is also working with small details. This week, we focus on some of these details that we are going to have to figure out before we move on from the prop shaft assembly that is still coming together. Joe ...
Salt & Tar: Episode 61-Boatyard Summer
Thankfully this episode is only hours behind when I normally upload and not days. Garrett scrambled and hooked up one of our solar panels so I could keep working on this video during the odd power outage in Napa. The bowsprit is finished up to where we planned on getting it during this haul out as...
Acorn to Arabella – Journey of a Wooden Boat – Episode 82: Working on Prop Shaft Fittings
We are getting farther up the hull with the planking and as we do so, we are nearing the point at the stern where the propeller shaft will go through. We need to get this hole bored before we plank past it because we are going to need to be able to align our bore perfectly level (our shaft is level...
Emily Builds a Sailboat – PART 1 – CLC Eastport Nesting Pram
Girls can build stuff, too! Support this and other projects via our Patreon page: Over the next two months, Emily is building a lightweight wooden boat, which will be used as a sailing, rowing, and motoring dinghy for S/V Temptress. This model is an Eastport Nesting Pram (plans by Chesapeake Light...
Acorn to Arabella – Journey of a Wooden Boat – Episode 81: Sawn Frames and Cedar Rack
Completing Arabella's hull is something we are eagerly striving for. With this installment we cross a milestone in that goal. All of Arabella's frames that can currently go in, are finally installed. Once we have completed the planking process, the last seven sets of frames (currently b...
Salt & Tar: Episode 60-Carving the Bowsprit
Garrett did a majority of the filming for this episode! I was stressing about whatever video I was working on at the time but Garrett crushed it and nearly finished the bowsprit in the time it took me to finish the episode haha It looks so great and can't wait to get the hardware made so we can...
Acorn to Arabella – Journey of a Wooden Boat – Episode 80: Sawn Frames and Bronze Floors
In last week's episode, we went into detail about how we are fabricating the forward sawn floors. From how we are taking measurements using tick sticks and a template to how we are cutting our rolling bevel down the frames without a ship's saw. In this episode we get into more of that wor...
Acorn to Arabella – Journey of a Wooden Boat – Episode 79: Making Sawn Frames
We've done steam bent frames for the majority of Arabella, now, in the stem and the stern, it's time to make some sawn frames. Where the bow and stern come in to the centerline timbers, the shape of the hull is fairly sharp. Steam bending frames in these areas would not be very easy nor i...
Salt & Tar: Episode 59- Deck Planking
Thanks for watching everyone! Many thanks and much love, Ruthie a HUGE thank you to everyone that has purchased items off our wishlist. You are giving us a big step forward in the projects to come. We've never had such nice tools. You all are amazing, beautiful, wonderful people that we a...
Acorn to Arabella – Journey of a Wooden Boat – Episode 78: The Last Oak Broad Strakes
Planking has been a very fun challenge though a bit of a challenge it has been. Learning to fit the oak planks to each other has its intricacies. We need to make sure the plank fits well fore and aft but also that the bevels match so that we can put in a good bead of cotton caulking. All of this ...
Acorn to Arabella – Journey of a Wooden Boat – Episode 77: Sole Beams and Diesel Engine
With all the bent frames installed in Arabella and all the bronze floors in place, we can now work on installing the sole beams. The sole beams are the members that will span from frame to frame and support the cabin sole inside of Arabella. We are installing these now because it will allow us to ...
Salt & Tar: Episode 58-Embracing Yard Life
Diving into yard life again. Long and productive days. Napa is hot so taking mid-day breaks is huge. The second half of the day when it's still warm but the decks are fully shaded are the best. After our work here in the yard is complete we'll be looking for a slip closer to the bay to con...
Acorn to Arabella – Journey of a Wooden Boat – Episode 76: Pocketless Frame Installation
One of the great parts of boatbuilding (or maybe the hardest part about learning boatbuilding?!) is that there are many different ways to do things. And they are all correct! Steaming in Arabella's frames is a good example of this. All her framing so far has been steamed in after we have cut ...
Acorn to Arabella – Journey of a Wooden Boat – Episode 75: The First Broad Strakes
We are learning so much from the planking process. After having cut and installed the garboard planks, we are now on to the first broadstrakes. These next couple of planks are going on right after the garboard and are also oak and need to be pretty sturdy. As these planks are also still fairly low...
Salt & Tar: Episode 57-Movement! Back to the Boatyard
Here we go! Back to the boatyard to get a few more big projects done on the boat. To come is deck planking, mast raising, through-hull cutting, bottom painting, and re-splashing. The trip was about 5 miles and took a little over an hour and a half. We arrived the Saturday before our haul out because...
Acorn to Arabella – Journey of a Wooden Boat – Episode 74: Installing the Port side Garboard
It's on to the port side Garboard! We wanted to show a little bit more detail on what goes into installing these big planks. It can be a little bit of a fight to get them to fit just right. This one also had a little imperfection that needed to be dealt with before installation. We have som...
Just About Sailing August 2019 – re-varnishing everything, stage one – removing the old varnish
This is a job I have been putting off for ages. Stripping back all the varnished areas back to bare wood and re-varnishing. To make it fair we have split the work 50:50; I am doing all the external wood and my daughter is just doing the bits inside the boat. Neither of us had done this before, so w...
Acorn to Arabella – Journey of a Wooden Boat – Episode 73: Fastening the Starboard Garboard
There is a fine art to planking a boat and we certainly are learning that by putting on Arabella's Garboard. This is one of the hardest planks to fit, but that just means it is a perfect test for us to learn the intricacies of planking. Arabella is going to have oak garboards and broadstrakes ...
Salt & Tar: Episode 56-River Shenanigans
I had a lot of fun putting this episode together. I'm looking forward to the day I get to make a sailing video for you all! We are so very grateful for the help we've received from you out there. The views, the subscribers, our patrons, and everyone that has donated from Amazon. It's ...
Acorn to Arabella – Journey of a Wooden Boat – Episode 72: The Garboard Plank
It is time to start planking Arabella! This moment has been a long time coming and we are thrilled to be able to finally start this process. It does mean a bit of a learning curve though, so we had our friend Thad Danielson come back to the boat yard and help us through the process of marking out ...
Acorn to Arabella – Journey of a Wooden Boat – Episode 71: Installing the Bronze Strapping
Once she is sailing, we are planning on taking Arabella all around the world on adventures and in all kinds of conditions. A bluewater sailboat like her needs to be tough and be able to stand up to all kinds of conditions. Atkin designed her with these considerations in mind, but there is one more...
Salt & Tar: Episode 55-Sampson Post and Battery Bank
Our final weeks of water life are upon us. Do not fret we are super excited about our haul out. In this episode we take on the sampson post and installing our house battery bank. The sampson post is our last big construction project while at Judy's dock. It went smoothly. We took our time while...
Acorn to Arabella – Journey of a Wooden Boat – Episode 70: What Are Stop Waters?
There are many steps in the boat building process that some people may not know of or think about when picturing the work being done. Most see the centerline timbers going up. Then the frames, the planks, deck, spars, etc. And Boom you have a boat! However, there are so many more intricate part...