Watch Sailing & Boating Adventures Around the World – Page 56 of 60
Explore sailing, boating, and water sports through our curated video archive. From epic sea voyages to serene diving escapes, discover unforgettable adventures from top YouTube creators. Start your journey. Dream big. Sail far.
Showing 1321-1344 of 1421 results
Acorn to Arabella – Journey of a Wooden Boat – Episode 37: Shaping the Forward Deadwood
With the ballast keel poured, faired and painted, it is now time to start building out fore and aft of it. Due to the naturally dense aspect of the ballast keel requiring such a condensed shape, deadwood pieces are necessary to fair it out into the wood keel so as to have a flowing bottom. In this...
Lofting the Lines; Part 1 – Rebuilding Tally Ho EP24
Rebuilding a historic sailing yacht – Lofting the Lines; Part 1. Support; Become a Patron; ----- This episode, I take some more measurements of Tally Ho’s current shape compared to her original lines, and make a big decision about how to go about bringing her back to a more authentic and elegan...
Acorn to Arabella – Journey of a Wooden Boat – Episode 36: Flip it all (Faired Ballast Keel)
Sometimes, you just have to flip things on their heads to work on them. As we finished fairing our the ballast keel, we flipped it and the wood keel in order to be able to work on the underside. With everything upside down, we will then be able to work on the deadwood and drilling before we bolt t...
The Wreck and the Rescue – Rebuilding Tally Ho EP23
Rebuilding a historic sailing yacht – The Wreck and the Rescue. Support; Become a Patron; --- This episode, I investigate the part of Tally Ho’s history where she was almost wrecked on a remote Pacific Atoll, in 1968. Amazingly, I have been given photographs of Tally Ho high and dry on the reef,...
Acorn to Arabella – Journey of a Wooden Boat – Episode 35: Final Cut of the Keel Timber
This is one expensive piece of lumber! We wanted to make sure that we accurately cut the keel timber to shape so our initial cut was only getting us close to the final shape, so that we could see whether it warped/checked/shrank etc. afterwards. Now that we are close to mating the two keels togeth...
Salt & Tar Episode 31 – Part 1: Cabin Re-Remodel
Cabin re-remodel! Big changes as we get back in touch with the dream that persuaded us to take on this project!
Acorn to Arabella – Journey of a Wooden Boat – Episode 34: Help from Colorado!
Ryan bought a plane ticket, rented a car, and took a one week visit to come from Colorado to Massachusetts to help us on our project... for free! Thank you Ryan. We were curious as to what he thought of his week here and everything we accomplished. Also! We will be sawmilling for the next couple ...
Acorn to Arabella – Journey of a Wooden Boat – Episode 33: Getting Help with Bow and Stern Timbers
Despite the arrival of Spring, weather just doesn't seem to want to let up. We've been struggling with the weather so as to start painting the keel timber and the ballast keel. With temps too cold to work on that, we switch gears and start working on the Bow and Stern timbers. Everythin...
Chainsawing & fitting huge new Keel Timber in a 1910 sailboat – Rebuilding Tally Ho EP21
Rebuilding a historic sailing yacht – Shaping and Fitting the Keel Timber. Support; Become a Patron; ----- This episode, I work on turning an enormous lump of Purpleheart Timber into a new Keel for the historic sailing vessel, Tally Ho. I make a plywood pattern from the old keel, then plane the...
Acorn to Arabella – Journey of a Wooden Boat – Episode 32: Sharpening Edge Tools
Having sharp tools is important. As temps are warming up and we are getting back into the thick of boatbuilding work, we felt this would be an appropriate video. Well kept tools lead to fun, productive and safe work. There is nothing worse than trying to get a job done with the wrong tool or one t...
Acorn to Arabella – Journey of a Wooden Boat – Episode 31: Final Thickness
We are clawing our way out of winter! Work is getting back on track and what better way to start finalizing our keel timber. We spent the first tentatively "warm" days finishing getting the keel timber to its final thickness along with a couple of outings. We are gearing up for a VERY B...
Removing HUGE Keel Timber from 20ton historic yacht, ALONE! TALLY HO EP20
Rebuilding a historic sailing yacht – Removing the Keel Timber / Bolting the Scarph. Support; Become a Patron; ----- This episode, I drive the 3000 miles back to Tally Ho from South Georgia, where Steve Cross has been milling Live Oak for me. I bed and bolt the 6’ Scarph in the new keel timber, ...
Acorn to Arabella – Journey of a Wooden Boat – Bonus Content: Dissimilar Metals Part 2
What a winter!.... We felt that this would be a good time to put out our dissimilar metals experiment back to back and then hit it hard next week with a full length video. When mixing metals in a build, there are a lot of things to consider. Not only do the metals interact with each other when subm...
Salt & Tar Episode 30
The work continues at the boatyard bringing us closer to splash time! saltandtar.org patreon.com/saltandtar gofundme.com/saltandtar Music credits They say-WowaMusik Maccary Bay-Kevin MacLeod ft. Brett VanDonsel on and on-Nicolai Heidlas Music
A2A – Journey of a Wooden Boat – Bonus Content: Dissimilar Metals and Galvanic action Part 1
Over the winter we decided to try out a little experiment we would share with everyone. While doing our research we heard a lot about the effects of different metals on one another. The nobility of a metal will determine how it reacts to others with differing nobility, leading to the more noble me...
Milling Live Oak in the Deep South – Rebuilding Tally Ho EP19
Rebuilding a historic sailing yacht – Milling Live Oak timbers on Cross Sawmill’s massive homemade bandsaw, in the Deep South. Support; Become a Patron; THIS episode, I am in southern Georgia , and I work with Steve Cross of Cross Sawmill to mill and grade lots of Southern Live Oak (Quercus Virg...
Acorn to Arabella – Journey of a Wooden Boat – Episode 30: Deadwood and Some Lead
We're still waiting on the weather to start warming up but we can still get ourselves as ready as possible for when it does. We start to work with the lumber that will become our deadwood and we shoot a propane tank to help us melt lead into the major divots on the ballast keel. We also have ...
Building A Chameleon Sailing Dinghy | The Launch #8
LINK TO THE "DINGHY COST SPREADSHEET": ----------------------------------------------------------------- The Chameleon dinghy is built and ready to launch. Now it's time to finally see how she floats, motors, rows, and sails. We load everything up in the truck and head to the lak...
Acorn to Arabella – Journey of a Wooden Boat – Episode 29: Lead Contamination and our Keel Pour
After the video of our lead keel pour came out, we received a lot of comments regarding the safety of the pour and about concerns or contamination to the surrounding area. We did our best to get information regarding such issues and went as far as calling the EPA number as well a several local agen...
Sailing a Homemade Outrigger Canoe in Hawaii (Ep.11 Sailing w/the Litzenbergers)
We're still in Maui! A friend of ours takes us sailing on his homemade outrigger canoe. The whole experience gets us super excited for our upcoming trip! #SailingHawaii #MoanaSailing #SailingCanoe
The History of the Yacht Tally Ho / Pilot Cutters / Going South – Rebuilding Tally Ho EP18
Rebuilding a historic sailing yacht – Tally Ho’s history, Bristol Channel Pilot Cutters, and a trip to a Live Oak Timber Mill. Support; Become a Patron; ----- THIS episode, I meet the Grandson of Mark Spinks, who Skippered Tally Ho in 1927 when she famously won the Fastnet Race, and continued t...
Acorn to Arabella – Journey of a Wooden Boat – Episode 28: Logging Round 2
There are differing ideas out there on what time of year is best to harvest trees for lumber. In our case, winter was ideal. Due to the cold and the lack of heating in the boathouse, we aren't able to work with certain materials such as paint, epoxy, fairing and bedding compounds, etc. All of...
Getting Epoxy to Kick during SCAMP Build- Freezing Alaskan Temps (Ep.9 Sailing w/the Litzenbergers)
Spencer is working hard to finish the SCAMP before we leave, but there are always a few setbacks. Watch as Spencer learns about epoxy shelf life! #SCAMPBuild #BuildingASailboat #BuildingASmallBoat