Max cruise marine YouTube Videos
Showing 31-45 of 109 results
The First WOOD TRIM Goes On Our Homebuilt Catamaran (MJ Sailing – Ep 301)
We take a very exciting step this week, and it is to begin a brand new part of finish work inside our catamaran. After getting our hands on some riff cut white oak this past spring, we're now ready to begin trimming it down and installing the hardwood tri...
I Had No Other Choice…. (MJ Sailing – Ep 294)
Please don't hate me for this...but yes, I've done it again. You've told me not to...but I really had no other choice. This happens to be another video focused on fairing. What choice did I have?, you ask. Not much. As we're still waiting to get a lase...
Installing Our Prop Shaft & Building the Skeg (MJ Sailing – Ep 292)
It's time to drill a large hole in the bottom of our boat, and finally install our stern tube and prop shaft. This week we have a project the two of us have been eager to work on for a very long time, and that is beginning to install our prop shaft. Las...
We Are SO LUCKY To Get This Sponsor – It Is a GAME CHANGER for us!! (MJ Sailing – Ep 291)
Our Catamaran Is Getting TOP OF THE LINE Electrical Equipment!! Boat projects came to a halt for a few days as we flew across the country from the east coast to the west to meet with our newest official sponsor - Xantrex. This is a company we have been t...
Bigger Gun..MUCH Better Results!! (MJ Sailing – Ep 289)
After failing last week with our spray gun, we trade up, and CAN'T BELIEVE the great results we get! After having primed the v-berth and bulkhead 5 last week, we continue aft in the guest hull, working on bulkhead 6, plus the hull leading to the guest hea...
TotalBoat vs Awl Grip…We Switched Primers – And We Can TELL!! (MJ Sailing – Ep 278)
Because of supply issues, we had to switch our high build primer...and our results were not what we were hoping for. After months and months of fairing, we have some very exciting footage to bring you, and that is because we are on to our next section of...
Lifting Our 7,000 lb Catamaran By Ourselves!! – Changing Our Base to Foam (MJ Sailing – Ep 285)
Can we lift up this beast of a boat with just the two of us? For the past two years of the build, our boat has been sitting on the forms which came with the kit from Vietnam. But this week, we lift up the catamaran to switch our our plywood forms for foa...
At Least We’re Not Sanding!! (Because We’re Vacuum Bagging) MJ Sailing – Ep 284
The first 1,000 people to use the link will get a 1 month free trial of Skillshare https://skl.sh/mjsailing05231 Hooray, we've put the sanders down!! For a few days anyway. Now that we're in that sweet spot of temperature, we can get to vacuum bagging s...
We Brought On Help – But Will They Stay?? (MJ Sailing – Ep 282)
Check out BougeRV and use code MJCIGS15OFF valid until 31st May for all CIGS series or use code MJ15 for 15% off valid until 1st Aug for all products. https://www.bougerv.com/products/200w-flexible-solar-panel https://www.amazon.com/dp/B0BJDHZ561 Watch t...
CATAMARAN BUILD – This Could Be A $$ Mistake (MJ Sailing – Ep 281)
$1,000 of bonding agent in our hands and one chance not to mess this up. Matt and I have been quite busy these past few days (just finished this project yesterday) and using the warm weather at our disposal to break out our methacrylate bonding agent agai...
This Could MAKE OR BREAK the Look Of Our Kit Boat (MJ Sailing – Ep 280)
It's time for us to begin filling all of those seams which pieced our kit boat together. We're finally back to good 'ol boatwork this week, and it has nothing to do with fairing!! Now that it's getting warm enough to work with products outside of the boa...
Should We Have Built This Holding Tank Ourselves? (MJ Sailing – Ep 275)
We are trying so very hard not to bore you with more videos of us just fairing and sanding, although that is basically what is taking up 90% of our time right now. And although more primer should be going on very very soon, we didn't think you'd be intere...
Hunting Down Hardwood (MJ Sailing – Ep 274)
We go to Maryland's #1 lumberyard to find wood for our cabinet trim. But are they going to have what we're looking for? This week is a toss between a bunch of small things we've been doing here and there. Since most of our attention (in real life) is ad...
PRIME DAY!! (MJ Sailing – Ep 273)
We completely transform the look of our bridge deck by spraying on a high build primer. We've been working very hard this new year to fair all our surfaces and get them ready for primer. Last week we were *so close* but still needed to touch up a lot of o...