Watch Sailing & Boating Adventures Around the World
Explore sailing, boating, and water sports through our curated video archive. From epic sea voyages to serene diving escapes, discover unforgettable adventures from top YouTube creators. Start your journey. Dream big. Sail far.
Showing 1-16 of 16 results
After a 7 year project, people think this is an entirely different boat.
Support TALLY HO; Become a Patron; ---- EPISODE 213 In this bonus episode I address some questions which have been asked a lot recently; What exactly is left of the original Tally Ho? Why didn’t I just build a new boat - and wouldn’t that have been easier? —— To become a Patron - To d...
Pouring Bronze / Fastening Floors – Wooden Boat Rebuild (EP81)
Rebuilding a historic sailing yacht - Pouring Bronze / Fastening Floors (EP81) Support; Become a Patron; ---- EPISODE 81. Having poured all the smaller bronze Floors, we have to build a bigger flask in order to cast the largest ones. Packing these big moulds isn’t without it’s setbacks, and we ...
Cutting for Propeller / Boring for Prop-Tube ( Wooden Boat Rebuild / EP80)
Rebuilding a historic sailing yacht - Cutting for Propeller / Boring for Prop-Tube (EP80) Support; Become a Patron; ---- EPISODE 80. Cutting the Prop aperture and boring out the hole for the stern-tube are intimidating jobs - you only get one chance to get it right. But it’s easier to tackle th...
BoatBuilding – Casting Bronze Floors (EP75)
Rebuilding a historic sailing yacht - Casting Bronze Floors (EP75) Support; Become a Patron; ---- EPISODE 75. In this extra-length episode, Pete and Clark show the process of making individual patterns for each of the floors, laminating thin strips of ply into the boat and then shaping and scul...
BoatBuilding – Restoring the Transom (EP74)
Rebuilding a historic sailing yacht - Restoring the Transom (EP74) Support; Become a Patron; ---- EPISODE 74. In this episode I work on repairing and reinstalling Tally Ho’s original transom timbers. Being Teak, they have escaped rot, but have a lot of damaged areas and holes that need to be fi...
Salt & Tar: Episode 90-Turning Dead Eyes
Keeping to our salty vision we turn up our dead eyes. We are a gaff rig ketch so we couldn't very well have turnbuckles, we NEED dead eyes. This video spans over a year and two different cameras so, apologies, the sound was difficult to get right on the episode. I hope you enjoy the process! C...
BoatBuilding – Finishing the Deck Structure! (EP73)
Rebuilding a historic sailing yacht - Finishing the Deck Structure! (EP73) Support; Become a Patron; ---- EPISODE 73. This is the day - the big reveal! With the deck structure fastened permanently into the Beam Shelf, we can remove the temporary cross-palls and finally see Tally Ho’s internal s...
BoatBuilding – Bilge Stringers / Oak problems! (EP72)
Rebuilding a historic sailing yacht - Bilge Stringers / Oak problems! (EP72) Support; Become a Patron; ---- EPISODE 72. In this episode we face a major dilemma - having found that one of the White Oak logs had porous grain (bad news!) I have to make the painful decision of whether or not to re...
Assembling the Bow Timbers! (TALLY HO 51)
Rebuilding a historic sailing yacht – Assembling the bow timbers / EP51. Support; Become a Patron; ----- EPISODE 51. In this episode we finally dry fit the purpleheart bow assembly timbers. In other news, we come up with a short-term solution to a damaged Babbitt bearing in the Ship-saw, and w...
Timber Boat Building – Installing Stern Assembly /EP44
Rebuilding a historic sailing yacht – Installing the Stern Assembly. Support; Become a Patreon; ----- EPISODE 44. With the deadline of the “Frame-raising party" looming, the race is on to try and get the Stern Assembly into the boat! With a strong team now, we are able to lift most of the...
Chopping off the end of a finger! – Boatbuilding & Woodwork (TH EP38)
Rebuilding a historic sailing yacht – Losing a Finger / Framing Progress - Support; Become a Patron; ----- EPISODE 38. Well, I’ve done something very silly and cut the end of my finger. Why would I do that, you may ask?! Well, it was all going a little too well, so I thought it was time to add...
Milling Live Oak in the Deep South – Rebuilding Tally Ho EP19
Rebuilding a historic sailing yacht – Milling Live Oak timbers on Cross Sawmill’s massive homemade bandsaw, in the Deep South. Support; Become a Patron; THIS episode, I am in southern Georgia , and I work with Steve Cross of Cross Sawmill to mill and grade lots of Southern Live Oak (Quercus Virg...
Cutting and Fitting a Keel Timber Scarph Joint – Rebuilding Tally Ho EP14.PART2.
Rebuilding a historic sailing yacht - Cutting and Fitting the Keel Scarph in a massive piece of hardwood timber Support; Become a Patron; ----- THIS episode, I cut and fit the big hook scarph in the Purpleheart for Tally Ho’s Keel timber. It’s a very dense hard wood, so it takes me some time,...
Buying a New Keel Timber / Chainsaw Modification – Rebuilding Tally Ho EP14.PART1.
Rebuilding a historic sailing yacht - Buying the biggest pieces of Purpleheart Timber I have ever seen! / Modifying a Chainsaw. Support; Become a Patron; ---THE SECOND PART OF THIS EPISODE WILL BE OUT JUST AS SOON AS I FINISH EDITING IT!--- THIS episode, I make my decision about Tally Ho’s Keel...
Building a big boatshed – Rebuilding Tally Ho EP3
I'm on a mission to rebuild a 1910 gaff cutter called Tally Ho. Having moved the boat up the pacific coast of the US, its time to build a huge shed over her. But I only have a week, and there's nobody around to help..........-If you'd like to support the Tally Ho project, please Subsc...