Watch Sailing & Boating Adventures Around the World – Page 137 of 146
Explore sailing, boating, and water sports through our curated video archive. From epic sea voyages to serene diving escapes, discover unforgettable adventures from top YouTube creators. Start your journey. Dream big. Sail far.
Showing 3265-3288 of 3490 results
Sail Life – Sailboat deck replacement, fairing the deck – DIY sailboat refit
Come join me for lots of sanding as I start fairing the deck aboard my 1987 Warrior 38 sailboat. Thomas's video: *** Links *** Sail Life on Patreon: Sail Life on Facebook: Sail Life on Twitter:
Acorn to Arabella – Journey of a Wooden Boat – Episode 18a: Bow and Stern Timbers (Part 1)
Last week we started shaping the keel timber. This week, we start on the laminations for the bow and stern timbers. We didn't have any timber large enough for these so we had to glue some large pieces together in order to achieve the desired dimensions. See how we made the patterns and then ...
30. We Removed Our Diesel Engine! – Sailing Vessel Somnium
We finally remove the diesel! We'd be wanting to remove it because it's just a hunk of junk. Not only has it not been running for 5-10 years according to the previous owner, it's seized, missing an alternator, and missing a starter. Check out what we did, where we took it, and how muc...
Sail Life – Sailboat deck replacement DONE (maybe) – DIY sailboat refit
In this video we lay up the last layers of glass on the deck. This marks an important milestone in the refit of my sailboat. All that's left to do now is fairing (huge job) and painting. *** Links *** Sail Life on Patreon: Sail Life on Facebook: Sail Life on Twitter:
Acorn to Arabella – Journey of a Wooden Boat – Episode 17b: Shaping the keel timber (Part 2)
We ended the last video with a teaser of us chainsawing some lead keels. We go into more depth on that and then show how we finished the rough shaping on the wooden keel. El video doblado en español. Desarrollado por Papercup: Síguenos en nuestro canal en español: FOLLOW US: Patreon: Instagr...![Getting Ready to Sail Downwind— Sailing Uma [Step 94]](https://i.ytimg.com/vi_webp/wf8u4QOdgR8/mqdefault.webp)
Getting Ready to Sail Downwind— Sailing Uma [Step 94]
Ever since we started sailing, we've always been beating into the wind. When we were in Grenada and planning our sail West to Bonaire, we had a few preparation and fixes to do before finally going downwind. If you enjoyed this episode, please give it thumbs up, it helps us out a bunch :) WA...
Sail Life – New deck on a sailboat DIY style ⛵⛵⛵
*** Links *** Sail Life on Patreon: Sail Life on Facebook: Sail Life on Twitter:
29. Belt Sander for Sanding a Sailboat Hull – Sailing Vessel Somnium
We've been sanding our boat's hull for far too long! In this episode we do a little sanding, a little hiking, and a little updating. ----------------------------------------------------------------------------------------------------------------------------------------------- Not-A-Brok...
Sail Life – First section of deck done & failed plans – DIY sailboat refit
I had planned on moving the boat this weekend. That didn't end up happening. Come join me for a quick update on my DIY sailboat refit. Epoxy vs. cold temperatures: *** Links *** Sail Life on Patreon: Sail Life on Facebook: Sail Life on Twitter:
Wrecks, Decks & Island Vibe Sundays – Ep. 69 RAN Sailing
Curacao is an island with a lot of culture and in this episode we explore some parts of it and get to experience the real island vibe. We start and finish the last boat project on RAN for this time and then we go sailing to Klein Curacao. Additional drone footage by our Curaçao friend Alsino: We...
Skifte av skroggjennomføringer (TruDesign Thru Hull and Seacock)
Replacing Thru-Hulls and Seacocks The goal for us was to replace the seacocks. Since we are the third owner of the boat, we didn´t know how old the Thrue-Hulls and Seacocks was. But the boat is from 1997 so they can actually be 20 years old. The new ones of composite. We chose True-Design. The reaso...
Sail Life – First layer of fiberglass on the new deck core – DIY sailboat refit
In this video, we put the first layer of fiberglass on the new deck of my 38 ft sailboat. Andy's channel (Boatworks Today): *** Links *** Sail Life on Patreon: Sail Life on Facebook: Sail Life on Twitter:
A2A – Bonus Content: Short Film – Acorn to Arabella: A Year and a Half in Review
We made this short film to show at the International Maritime Film Festival in Bucksport Maine the weekend of September 29th, 30th and October 1st. The film festival is jointly put on by Downtown Bucksport and Wooden Boat magazine. The short explains a little bit about how we got started and what w...
Hope It’s The Right Decision – Ep. 68 RAN Sailing
We have a big decision to make in this episode and it turns out that we need to rebuild some parts of the interior of RAN. It was a bit nervous we can tell you! But we take a well needed break from boat work and visit the Blue Room and drink green shots with the locals. Enjoy! We are a Swedish cou...
A Close call with a ship while Night Sailing Episode 47 Sailing Catalpa
This episode we have a container ship nearly crash into Catalpa, we replace windows and lee installs security screens. Oh and hang out with some other kid boats ;-) Big love the Catalpa Crew Lee, Sara, Taj and Bella Cheers for watching and have an epic day! Music Sean Fitzgerald East of Eden ...
Sail Life – Deck core replacement 99% done! – DIY sailboat refit
All of the old core is now removed aboard my sailboat Athena. Join me as I put down the last of the new plywood and foam core. *** Links *** Sail Life on Patreon: Sail Life on Facebook: Sail Life on Twitter:
Installing Our Cruise RO Watermaker – Ep. 67 RAN Sailing
Water is life and we are so happy that we can finally make our own drinking water! No more struggling with jerry cans and now we are even more independent on RAN. After launching RAN and going back to the anchorage in Spanish Water, Curacao, we start right away with the preparations for the watermak...
Acorn to Arabella – Journey of a Wooden Boat – Episode 16: Melting Lead
The lead keel is one of the most exciting parts of this build at the moment but it is also the scariest, by far! We have melted down some of the wheel weights and loose lead in order to weigh it, while talking about that, we weigh in on the actual pour. Also, a few updates at the end of the video....
Sail Life – The episode where EVERYTHING breaks – DIY sailboat refit
Plywood core video: *** Links *** Sail Life on Patreon: Sail Life on Facebook: Sail Life on Twitter:![[10] Power tools are a girl’s best friend (part 2)](https://i.ytimg.com/vi_webp/1lEG5yy_UYI/mqdefault.webp)
[10] Power tools are a girl’s best friend (part 2)
We look at some of the uses we made of the power tools and then do a review of how some of the tool could be improved by a few changes in design. These are mid-range tools in terms of price and resilience, but a cheaper tool will sink at the same speed as an expensive one if it falls off the boat, ...
Sailing Around The World – Up To Our Necks In It – Living With The Tide Ep10
In this episode Matt catches himself his very first Lobster and a whole bunch of Mackerel. Then our lovely heads blocks up and its time to try and unblock it in our bouncy anchorage on a lovely hot day....... When things begin to look up our fridge decides to turn off and stay off, so with no fridg...
RAN On The Hard – Ep. 64 RAN Sailing
Prepare for an episode with lots of boat work! We’re back in the boatyard to do some work on RAN. We take her to Curacao Marine in Willemstad and after hauling out we spend a couple of days prepping and then painting new antifouling, changing the batteries and the anodes while melting away in the 35...