Watch Sailing & Boating Adventures Around the World
Explore sailing, boating, and water sports through our curated video archive. From epic sea voyages to serene diving escapes, discover unforgettable adventures from top YouTube creators. Start your journey. Dream big. Sail far.
Showing 1-24 of 46 results
Fine Wood Working With Limited Tools.
A huge thank you to OutIn for caffeinating us! OutIn Nano Espresso Maker: OutIn Basket Plus: Support: Patreon: PayPal: Buy Us A Beer!!: ————- GoFundMe: ————- Total Boat X Sailor Barry Affiliate Link - Barry - Hailly Amazon WishList!: #tallyho #sampsonboatco #sailingtips #sailing #...
ELECTRICITY On Our Wooden Boat, First time EVER!
Electrifying the boat for the first time in its life feels very satisfying, especially when it’s seconds before haillys mom shows up for a sailing trip! Mistakes were made but all is well! Thanks so much for watching! Redodo: Referral link (5% commission to us) 4% discount code “SailorBarry” ...
Launch Party! Are you coming?
In this week's video, we celebrate springtime in the Netherlands filming a final update on the boat before her launch in April, showing you how the woodwork is being finished plus giving you a tour of the main components of the tech room and electrical room. You're invited to the Launch ...
Boat Tour! ALUMINUM Sailboat Pt 15 – INTERIOR Layout Enksail Orion 49 | LEWMAR Factory Tour
This time on Distant Shores we give you a full tour of the interior of our custom aluminum Enksail Orion 49 sailboat as she is being assembled in the shop using an interesting build method outside the hull. We also make a visit to the Lewmar factory in England as we research equipment for our new bo...
Finishing Casting & Floors / Plank Stock ( TALLY HO EP83)
Rebuilding a historic sailing yacht - Finishing Casting & Floors / Plank Stock (EP83) Support; Become a Patron; ---- EPISODE 83. We have finished casting! In this episode, the final lodging knee is cast by Daniel - his first time pouring the molten bronze, and not without a little bit of f...
A Total Rebuild for Our Sailboat’s Switchboard – Free Range Sailing Ep 149
After 4 years of saying it needed to be done, we finally replace and rewire our hideous electrical switchboard in our sailboat! KEEP US SAILING Support us and gain early access to videos and other exclusive rewards. Become a patron of Free Range Sailing today! Some of our fans prefer to make a...
Pouring Bronze / Fastening Floors – Wooden Boat Rebuild (EP81)
Rebuilding a historic sailing yacht - Pouring Bronze / Fastening Floors (EP81) Support; Become a Patron; ---- EPISODE 81. Having poured all the smaller bronze Floors, we have to build a bigger flask in order to cast the largest ones. Packing these big moulds isn’t without it’s setbacks, and we ...
Complete Sailboat Makeover (New Cabinetry) – Free Range Sailing Ep 147
This week we reveal our brand new galley and the work that we have been carrying out to complete it over the last 3 months. KEEP US SAILING! Support us and gain early access to videos and other exclusive rewards. Become a patron of Free Range Sailing today! Some of our fans prefer to make a di...
Cutting for Propeller / Boring for Prop-Tube ( Wooden Boat Rebuild / EP80)
Rebuilding a historic sailing yacht - Cutting for Propeller / Boring for Prop-Tube (EP80) Support; Become a Patron; ---- EPISODE 80. Cutting the Prop aperture and boring out the hole for the stern-tube are intimidating jobs - you only get one chance to get it right. But it’s easier to tackle th...
Boatbuilding – Lining-out for Planking (EP78)
Rebuilding a historic sailing yacht - Lining-out for Planking (EP78) Support; Become a Patron; ---- EPISODE 78. In this episode we calculate the locations and sizes of all the hull planks, based on the complex shape of the hull. I’ve never done this before, so we get some help from the Lead Sh...
BoatBuilding – Finishing the Transom (EP76)
Rebuilding a historic sailing yacht - Finishing the Transom / More Floors (EP76) Support; Become a Patron; ---- EPISODE 76. In this episode I focus on the final install of the transom, using a couple of old tricks to ensure that it stays watertight. The planks get bolted to the sternpost and ev...
BoatBuilding – Casting Bronze Floors (EP75)
Rebuilding a historic sailing yacht - Casting Bronze Floors (EP75) Support; Become a Patron; ---- EPISODE 75. In this extra-length episode, Pete and Clark show the process of making individual patterns for each of the floors, laminating thin strips of ply into the boat and then shaping and scul...
BoatBuilding – Restoring the Transom (EP74)
Rebuilding a historic sailing yacht - Restoring the Transom (EP74) Support; Become a Patron; ---- EPISODE 74. In this episode I work on repairing and reinstalling Tally Ho’s original transom timbers. Being Teak, they have escaped rot, but have a lot of damaged areas and holes that need to be fi...
BoatBuilding – Finishing the Deck Structure! (EP73)
Rebuilding a historic sailing yacht - Finishing the Deck Structure! (EP73) Support; Become a Patron; ---- EPISODE 73. This is the day - the big reveal! With the deck structure fastened permanently into the Beam Shelf, we can remove the temporary cross-palls and finally see Tally Ho’s internal s...
BoatBuilding – Bilge Stringers / Oak problems! (EP72)
Rebuilding a historic sailing yacht - Bilge Stringers / Oak problems! (EP72) Support; Become a Patron; ---- EPISODE 72. In this episode we face a major dilemma - having found that one of the White Oak logs had porous grain (bad news!) I have to make the painful decision of whether or not to re...
BoatBuilding – Building the Deck Structure! (EP71)
Rebuilding a historic sailing yacht - Building the Deck Structure (EP71) Support; Become a Patron; ---- EPISODE 71. In this episode we finish building the majority of the deck structure! Lots of dovetails are cut, and the deck layout emerges as we add carlins and half beams one by one. We als...
BoatBuilding – Fitting Deck Beams! (Tally Ho EP70)
Rebuilding a historic sailing yacht - Fitting Deck Beams! (EP70) Support; Become a Patron; ---- EPISODE 70. It’s time to start building the Deck Structure! Firstly I take a look at the old Beam Shelves and analyse the 110 year-old joinery of the original boatbuilders. I decide to replicate the...
BoatBuilding – Installing Beamshelves / BIG plans! (EP67)
Rebuilding a historic sailing yacht - Installing Beamshelves / BIG plans! (EP67) Support; Become a Patron; ---- EPISODE 67. In this episode, I finish planing the beamshelves, move them into the boat, and start the process of bending them around the inside of the frames - creating some big load...
The Pilot Cutter PELLEW (EP65)
Rebuilding a historic sailing yacht - The Pilot Cutter PELLEW (EP65) Support; Become a Patron; ----- EPISODE 65. In this episode, I return to Cornwall to catch up with Luke Powell and his team, who are getting ready to launch the replica Pilot Cutter PELLEW. Luke talks about how this project c...
Milling White Oak Timber in New England (EP63)
Rebuilding a historic sailing yacht - Milling White Oak in New England (EP63) Support; Become a Patron; ----- EPISODE 63. In this episode Cecca and I travel to New York, where we house-and-dog-sit for some friends. I drive up to Connecticut to meet Duke at New England Naval Timbers, who supplie...
Boatbuilding – Making Beam Shelves (Tally Ho EP62)
Rebuilding a historic sailing yacht - Making Beam Shelves / Sheer Clamps (EP62) Support; Become a Patron; ----- EPISODE 62. In this episode I start by adjusting the position of some of the frames, and fairing them all on the inside. Then I cut and fit the scarph joins on the big 6-1/2” x 3...
Installing the Fashion Pieces (Rebuilding Tally Ho EP61)
Rebuilding a historic sailing yacht – Installing the Fashion Pieces (EP61) Support; Become a Patron; ----- EPISODE 61. In this episode we install the Fashion Pieces, which will form the connection between the hull planking and the transom. We have to cut the heels, drill and chisel the no...
Shaping the Keel / Adze work (EP59)
Rebuilding a historic sailing yacht – Shaping the Keel / Adze work (EP59) Support; Become a Patron; ----- EPISODE 59. In this episode, after roughing-out the starboard side Rabbet into the Stem, I make a jig to transfer the measurements for the shape of the Keel Timber from the lofting floor to...