Watch Sailing & Boating Adventures Around the World – Page 2 of 2
Explore sailing, boating, and water sports through our curated video archive. From epic sea voyages to serene diving escapes, discover unforgettable adventures from top YouTube creators. Start your journey. Dream big. Sail far.
Showing 25-43 of 43 results
VlogBonus BMW R80/7 Build | Bing Flat Top Diaphragm Replacement
For those of y’all with the Bing Flat Top Carbs, I made a video that will hopefully help you save a little bit of money. You are able to use any BMW BING 32mm carb rebuild kit and work with the supplied diaphragms. All you have to do is use a little heat. No need to buy the Slide/Diaphragm Assembly.
Vlog3 Scrambler/Brat BMW R80/7 Build | Will she start?
Inspected and cleaned the carbs enough to try and see if I can get the BMW to turn over.
Vlog2 Scrambler/Brat BMW R80/7 Build | Is there proper compression?
The correct size battery came in and I am able to check the compression on the high mileage BMW.
Vlog1 Scrambler/Brat BMW R80/7 Build | Wiring and Starter
Today I worked on getting 12v through the system and checking to see if I could get the starter engaged. A proper size battery is on order as no one has them in stock in Charlotte.
Scrambler/Brat BMW R80/7 Build | Vlog Intro
I am in possession of one of my dream bikes, a vintage BMW airhead. This one, in particular, is a 78’ R80/7. Over the next few months, I am going to be getting her back on the road. After that, I’m not quite sure where she’ll end up! She is high mileage (90k), nonrunning, parts missing and was even ...
Acorn to Arabella – Journey of a Wooden Boat – Episode 74: Installing the Port side Garboard
It's on to the port side Garboard! We wanted to show a little bit more detail on what goes into installing these big planks. It can be a little bit of a fight to get them to fit just right. This one also had a little imperfection that needed to be dealt with before installation. We have som...
INSTALLING our VETUS HYDRAULIC STEERING on our BOAT 102 | YACHT REBUILD WEEK 77
(Ep.85) Part 2 of our steering process.. We assembled all the necessary fittings to do so, and then mounted our hydraulic pump as well as our autopilot. We mounted our hydraulic cylinder as well and ran the hose from the pump to the cylinder.. bled out the system and wam bam we got our steering goin...
RAYMARINE ELECTRONICS INSTALLATION | YACHT REBUILD WEEK 73
(Ep.81) If you would like to support our production, THANK YOU! You can also make a one time donation: PayPal: You can buy a TSHIRT below: Kicking off some more tasks & man! Don't it feel good! We are on on the last stretch and every task we remove we are a bit excited every time!...
The RACE to FINISH our BOAT! | YACHT REBUILD WEEK 72
(Ep.80) If you would like to support our production, THANK YOU! You can also make a one time donation: PayPal: You can buy a TSHIRT below: We have been kicking off tasks like hot cakes!! While we wait for our engine parts to arrive we got started by getting some of our smaller tasks out th...
$300 DIY Dive HOOKAH + Cleaning Our Boat’s Bottom!!
update. We had a viewer say there is now a sticker on the compressor that says breathing hazard. So take that into consideration, you might not want to do this. Here's another money-saving boat life tip! Today, we clean the bottom of the boat. Depending on the environment we’re in, we ...
Chopping off the end of a finger! – Boatbuilding & Woodwork (TH EP38)
Rebuilding a historic sailing yacht – Losing a Finger / Framing Progress - Support; Become a Patron; ----- EPISODE 38. Well, I’ve done something very silly and cut the end of my finger. Why would I do that, you may ask?! Well, it was all going a little too well, so I thought it was time to add...
Tiny House Tour: Emily’s Custom “Little Sunshine”
Here is a tour and some background information about Emily's custom tiny house on wheels, called Little Sunshine, built in 2015 with the help of Trekker Trailers in Leesburg, Florida. --- PLEASE SUBSCRIBE! Follow Emily & Clark's Tiny Adventure blog: svtemptress.com Facebook and Inst...
Carving a DIY WIND GENERATOR Blade from Wood (Behind the Scenes Day 4)
We've spent the last week shooting a how-to video about Clark's home-carved wind generator blades, which can supply all our electricity aboard our boat. His method can be used for various sizes of rotors and propellers. Here's a time lapse of filming day 4. We hope you'll stay t...
SHORT BUS VAN CONVERSION In 6 wks with NO experience (time-lapse) | Expedition Evans (van life)
We made the jump and built our tiny home on wheels in the body of a short bus! It was INSANE and a ton of fun. If we can do it, you can do it.
Acorn to Arabella – Journey of a Wooden Boat – Episode 16: Melting Lead
The lead keel is one of the most exciting parts of this build at the moment but it is also the scariest, by far! We have melted down some of the wheel weights and loose lead in order to weigh it, while talking about that, we weigh in on the actual pour. Also, a few updates at the end of the video....
Acorn to Arabella – Journey of a Wooden Boat – Episode 11: Heavy Metal
In this video we talk about the lead keel and what it is for as well as show our biggest and best haul of lead yet! If you would like more information about our project and ongoing videos please check out our website If you would like to help out please consider becoming one of our patrons and rece...
Acorn to Arabella – Journey of a Wooden Boat – Episode 10: Keel Timber and Open House
We held an Open House on May 6th 2017 to celebrate getting the keel timber, Steve's birthday and get help moving the keel timber into the boathouse. It was really an amazing day that we will never forget and we look forward to sharing this project with many more people to come! Thank you to ev...
Episode 390 – Noisy.
I now have an ETSY store. Selling odds and ends from our journeys, as well as arty things I have been working on over time. It is a collection of years of things. Check it out! NEW!! I now have an eBay store of odds and ends from projects we have going on. Check it out every so often Here is al...