Watch Sailing & Boating Adventures Around the World – Page 54 of 56
Explore sailing, boating, and water sports through our curated video archive. From epic sea voyages to serene diving escapes, discover unforgettable adventures from top YouTube creators. Start your journey. Dream big. Sail far.
Showing 1273-1296 of 1327 results
How we Built an 8 Foot Tender Which Folds to 4 Inches Wide! | ⛵ Sailing Britaly ⛵
🔔 SUBSCRIBE ➜ Buy the plans here ➜ Would you like an 8' (2.4 m) long dinghy which folds to just 4" (10 cm) wide?! You can stow it along your lifelines, it is ready to row in less than 60 seconds, can plane with an outboard and can even sail to explore the shallow areas your boat can'...
Acorn to Arabella – Journey of a Wooden Boat – Episode 21: Our Lady Victoria
Previously we drove to Rhode Island to build up some connections. While we were there, we were urged to go check out a boat that was for sale near there. We're lucky we did! What a treasure! Victoria is one of the biggest assets we have come across so far! We hope you enjoy the journey she ...
Ep015 Detailed Composite Material Discussion Tech Talk
This Episode concentrates on the reinforcements used in the build with a detailed explanation of the substrate qualities including Foam Core and Stitched Fabrics. -~-~~-~~~-~~-~- Go Back to where this all began at Episode 1: -~-~~-~~~-~~-~-
The Dream Maker – James Wharram Part 2 – Ep 36 Sailing Luckyfish
In this second part of The Dream Maker - James Wharram talks candidly about the rift that developed between JWD and the Polynesian Voyaging Society in the mid 90's, during the Gathering of the Great Canoes in Tahiti. We also touch on the all important but too often overlooked social aspect of o...
Ep010 How to Spray Gel Coat for a Catamaran Hull
A decision to build a 40 foot Catamaran should not be taken lightly. Join Ross Boardman in a series of videos that shows the ups and downs, logistics and blood sweat, swearing and tears involved in the building of a fibreglass composite catamaran. Episode 10 marks the real start to the build with e...
Acorn to Arabella – Journey of a Wooden Boat – Episode 17b: Shaping the keel timber (Part 2)
We ended the last video with a teaser of us chainsawing some lead keels. We go into more depth on that and then show how we finished the rough shaping on the wooden keel. El video doblado en español. Desarrollado por Papercup: Síguenos en nuestro canal en español: FOLLOW US: Patreon: Instagr...
SOLAR ASSISTED YACHTS – An Interview With Heliotrope Yachts Owner
I take a tour of Heliotrope, a solar assisted power yacht, and interview the owner of the boat and manufacturing company to learn more about Solar power generation, storage and the future of yachting. For more info about Heliotrop yachts visit: We need your help to keep making videos. You can b...
Ep008 Demoulding the Starboard head module
A decision to build a 40 foot Catamaran should not be taken lightly. Join Ross Boardman in a series of videos that shows the ups and downs, logistics and blood sweat, swearing and tears involved in the building of a fibreglass composite catamaran. In this Episode I complete the Bathroom head module...
Our Boat is Born! Distant Shores III comes out of the mould
Our new Southerly 480 sailboat came out of the mould at the Discovery Yachts Shipyard in the UK last week and we were there to document it! In this latest update we show you the laying-up process for the hull of Distant Shores III, show the hull coming out of the mould, check out the unique swing ke...
Acorn to Arabella – Journey of a Wooden Boat – Episode 16: Melting Lead
The lead keel is one of the most exciting parts of this build at the moment but it is also the scariest, by far! We have melted down some of the wheel weights and loose lead in order to weigh it, while talking about that, we weigh in on the actual pour. Also, a few updates at the end of the video....
Ep005 Blame it all on Ron – Catamaran Build Life On The Hulls.
In this episode I have restored the starboard staircase and laminate and demould it with some unexpected grief. The jigsaw puzzle this project is begins to take shape. A decision to build a 40 foot Catamaran should not be taken lightly. Join Ross Boardman in a series of videos that shows the ups an...
LIVING OFF THE GRID FOR 30 YRS. on a sailboat, and Loving It!!
In this vid we show how we managed to live 30 years off the grid. Charging our batteries to get the most out of them and discussing the different methods of charging and how to get the most out of your solar panels. Please support us on or Follow us on
Acorn to Arabella – Journey of a Wooden Boat – Episode 10: Keel Timber and Open House
We held an Open House on May 6th 2017 to celebrate getting the keel timber, Steve's birthday and get help moving the keel timber into the boathouse. It was really an amazing day that we will never forget and we look forward to sharing this project with many more people to come! Thank you to ev...
EP001 Honey I bought a 40ft Catamaran Mould!!!!! – Building a Catamaran
A decision to build a 40 foot Catamaran should not be taken lightly. Join Ross Boardman in a series of videos that shows the ups and downs, logistics and blood sweat, swearing and tears involved in the building of a fibreglass composite catamaran. -~-~~-~~~-~~-~- Go Back to where this all began at ...
How to Make Boat Planking Boards out of a 2×12
Milled lumber is expensive. A much cheaper alternative is to purchase dimensional lumber and mill it yourself. Here I convert a 16 foot long 2x12 into 1/4 inch Planking stock. Follow us on Instagram: Check out our website: www.riggingdoctor.com
Life is Like Sailing – An Unexpected Destination
Sometimes you need a Plan B. Now you can bring LIFE IS LIKE SAILING artwork and photos into your home! Check out the links below! music:
BUILDING A BOAT IN MEXICO: PART 3 OF 3
In a tiny Mexican town, we work against all odds to successfully build a stitch and glue nesting dinghy, the Fishbote 11 by Bateau Boats. As novices, we learn quite a bit about resin and fiberglass as our dinghy comes together. Being in a remote location, we have to do a bit of searching for suita...
BUILDING A BOAT IN MEXICO: PART 2 OF 3
In a tiny Mexican town, we work against all odds to successfully build a stitch and glue nesting dinghy, the Fishbote 11 by Bateau Boats. As novices, we learn quite a bit about resin and fiberglass as our dinghy comes together. Being in a remote location, we have to do a bit of searching for suita...
BUILDING A BOAT IN MEXICO: PART 1 OF 3
In a tiny Mexican town, we work against all odds to successfully build a stitch and glue nesting dinghy, the Fishbote 11 by Bateau Boats. As novices, we learn quite a bit about resin and fiberglass as our dinghy comes together. Being in a remote location, we have to do a bit of searching for suita...
STORM FLOODS WREAK HAVOC. Ep 45
In a follow-up to last week's update in which we described the miserable weather here, we show you some of the damage that this unprecedented storm has caused. Many thousands of people have been flooded and displaced, whilst a fair few boats have taken a battering too. But that's just the...
Living in Chaos – Staying Aboard During a Refit
We have lived aboard our boat throughout its entire refit, starting back in June 2015. There have been days where camping in a tent would have been a big upgrade, but we felt being inside the mess would be a huge motivator to getting work done. As areas get completed, the boat feel a little nicer a...
Salt & Tar Episode 14 – Trees for Masts
We drop a few doug fir trees on our neighbors property for masts, booms, gaffs, etc.
