Watch Sailing & Boating Adventures Around the World – Page 42 of 56
Explore sailing, boating, and water sports through our curated video archive. From epic sea voyages to serene diving escapes, discover unforgettable adventures from top YouTube creators. Start your journey. Dream big. Sail far.
Showing 985-1008 of 1327 results
Ep179 The Saloon Roof Challenge
Possibly one of the hardest parts of this Catamaran Build has been the Saloon Roof Challenge .Pull out the stops and get er done, I say. Patreon Membership Thank you for supporting my production - If you would like to contribute to our project you can make very appreciated donations to this Pay ...
Salt & Tar: Ep.151- Herringbone Table
I knew I wanted the old redwood in the herringbone pattern for the tabletop I just had to convince Garrett. Redwood's soft but the stuff we have from my parents' old hot tub is pretty hard and with an epoxy coat on top, it's perfect for the dinette table. We also install the companion...
Ep178 Sailing Holiday Plans Scrapped- Boat Work is now in Top Gear.
A blow to our family holiday plans leaves me with the chance to get a whole lot more boat work done and this week is no exception. Hoards of laminating sees the cockpit mouldings stiff and relatively thin due to the use of Soric Core Mat. Our Sailing Holiday Plans Scrapped, so the boatwork is now in...
Salt & Tar: Ep.150- Companion Way Stairs!
Thanks for watching everyone! ~Ruthie p.s. if you’re near the SF Bay Area and would like to volunteer you can reach us here: [email protected]. Let us know your experience and what you’re comfortable doing. We’ll get back to you as soon as we can. A huge thank you to all that have already re...
Salt & Tar: Ep.149- First Fuel Up & Rescue Mission
What an awesome test for the engine! No one was hurt, nothing broke, just great execution from the boat. I'm so happy because I urged Garrett to take the boat out for weeks and finally he was down to take the boat out under her own power even though we didn't have the dinghy. It was more o...
Salt & Tar: Ep.148- Insulating the Engine Box
Thanks for watching everyone! ~Ruthie p.s. if you’re near the SF Bay Area and would like to volunteer you can reach us here: [email protected]. Let us know your experience and what you’re comfortable doing. We’ll get back to you as soon as we can. A huge thank you to all that have already re...
Salt & Tar: Ep.147- Trim and Treats
Home sweet home. The interior is coming together and thanks to Jack's help a few extra treats are added. Light inside our hatches, a charging station at the table for editing, AND he says I'll even be able to have a blow dryer! Thanks for watching everyone! ~Ruthie p.s. if you’re near t...
Ep174 – Why Strip Plank Foam Core ? – Catamaran Build
The purpose of the PVC Foam Core in this Catamaran Build aside, the shaping has been a real challenge to ensure I get a consistent lightweight structural result. This week I set about Hand Shaping a Catamaran Deck Core and you may ask the question "Why Strip Plank Foam Core?. There is very good...
Salt & Tar: Ep.146- Day 2,219
All music (with the exception of the intro) is by a follower, Joachim Challem. Check out their music on Spotify and the new album being released July 8th, 2021. Follow via @joachimchallem and also their website www.challem.nl Soft smooth tunes I was so happy to receive and include in an episode! ...
EP173 Catamaran Deck Foam Core and Catalysing Resins
Boat building with modern composites requires an understanding of the chemistry , the process, and the engineering to get the best result. As winter hits the Southern Hemisphere, I am required to adjust the catalysing to suit the climate, the ability of the worker, and improving the workflow in a ma...
Salt & Tar: Ep.145- Got Our Boom Back
Two projects get completed in this episode. I finish my solo project, the port quarter storage, and Garrett completes the main boom and it's back on board! Thanks for watching everyone! ~Ruthie p.s. if you’re near the SF Bay Area and would like to volunteer you can reach us here: saltandtarcr...
🔴 Why does this BOAT BUILD need an INSANE 6,000 feet of pipe work?!!
Boat building is a complicated process, and this boat build seems doubly so! In our first Ruby Rose 2 video we look at the whole boat building process surrounding hull number 1. Vacuum infusion is a complicated process and following the construction of the plug then the mould, it can all begin 6,000...
EP172 – No Foam Core , Big Problem.
Plagued by shortages in supply I have to think outside the box to make sure I get this Catamaran Deck Build. The Dilemma , " No Foam Core " available anywhere and it has the potential to hold me back for months if not longer. Patreon Membership Thank you for supporting my production - I...
Salt & Tar: Ep.144- My First Solo Project
Thanks for watching everyone! ~Ruthie p.s. if you’re near the SF Bay Area and would like to volunteer you can reach us here: [email protected]. Let us know your experience and what you’re comfortable doing. We’ll get back to you as soon as we can. A huge thank you to all that have already re...
Ep171 Epic Single Handed Laminating Sessions – Catamaran Build
The days seem to run into each other and the constant laminating is becoming a bit of an arduous task as I consider detail and strive to obtain the perfect void free laminate. Although not rocket science, the devil really is in the detail and as the layers are consolidated into a solid structure I c...
E170 – Foredeck Laminates and Spray Gun Woes
Shortages in material supply and resin spray gun issues proves that outside influences can ultimately effect a massive project like this , but alas, I have a couple of aces up my sleeve to solve both and forge ahead with the deck build. Getting close no and a sneak peak of the current state of the C...
Salt & Tar: Ep.142- Sliding Galley Doors
A window into a typical day for us. Garrett's Dad was visiting, one of Swab's favorite humans, and he and Swab contemplated life and the meaning of it all while casting a line. Garrett messed around with a few projects. The spigot replacement was a success and we can finally permanently cl...
EP 169 Laminating Catamaran Deck Window Inserts & Understanding Laminate and Core Structures
This Catamaran Build is hotting up as I am well into reinforcing the Deck Mould Window Inserts to ensure not only the structure but the cosmetics in the end product are being dealt with. It's true, I am a details man, I love the theory that holds the composite structures together, especially wh...
Salt & Tar: Ep.141- Swoop There It Is
A long one, for the fans 💕 ~R p.s. if you’re near the SF Bay Area and would like to volunteer you can reach us here: [email protected]. Let us know your experience and what you’re comfortable doing. We’ll get back to you as soon as we can. A huge thank you to all that have already reached o...
Ep168 – A “Ship Load” of Laminating – Who ya gonna Call!
In the aftermath of the Massive Gel Coating Session of the Catamaran Deck, we went straight into an 8 hour FRP laminating session, opting to lay down multiple layers to ensure we had access to all areas of the Catamaran Deck without disturbing the Gel Coat Layer. Truly a ship load of laminating. Whe...
Salt & Tar: Ep.140- Rounding a Corner
Ruth gets behind the power tools. Thanks to Noé, our volunteer, he can take the time to learn me a thing or two. So much of the build has been REALLY important that I’ve not wanted to “mess” it up and Garrett’s been so busy I haven’t asked him to teach me. I feel like I’m at a place where I can star...
Catamaran Deck Gel Coat Timelapse March 2021
A quick view of an epic milestone in the build of our Catamaran. This time lapse is a glimpse of the process, without the mass of preparation beforehand. For those with short attention spans this should really appeal and if you want to see the real work that went into it Full story and detail in Ep...
Gel Coating a 12 Metre Catamaran Deck
It's finally here, the all important Gel Coating of the massive Catamaran Deck Mould. In all, months of prep, polishing and repairing comes down to an hour and a half of application. Having my best Team ready to help, namely Sam and Ellen our adult children makes the success of this day even mo...