We’re Over-Wintering Where? Getting Ready for Our First International Passage
This week, we’re getting our homebuilt wooden boat ready for her first international passage. Sure, it’s just to Canada, but to us, it’s a big deal!
First up is finishing work on the bowsprit. I needed to get the bow out of our bronze bow roller before we could reinstall it. Thank goodness for clamps and our onboard workbench! Getting the bow out was the easy part, but then I had to install it while bouncing around under the bowsprit in our tender!
Next, we needed to re-waterproof the spot where the mast goes into our forepeak. I scraped off the Flex Tape residue, sanded it, and shellacked it. Then I snugged up the shims holding the main mast in place and wrapped them in a piece of old sailcloth. This serves two purposes: it prevents the shims from poking through the Flex Tape, and it keeps the Flex Tape from adhering directly to the mast.
I also finished the rigging for our new light-wind sail, which we picked up from Doyle Sails. Some might call it a “code zero.” Whatever you want to call it, it’s going to make a big difference for us when the winds are light. More sailing, the better! One last piece of rigging: a halyard to hoist our quarantine and international flags, now that we’re looking at crossing some international boundaries!
With our final to-dos checked off the list, it was time to head from Marion, through the Cape Cod Canal, to Provincetown to meet up with Josh and Erin from the Schooner Hindu! We had a beautiful and uneventful day motoring across Cape Cod Bay.
We arrived in Provincetown just in time for the 4th of July parade and fireworks show. We had a front-row seat from the wave attenuator in the harbor (and Akiva enjoyed it, too, since he got to run free on the floating dock).
Finally, one last trip back to Granby to collect everything Arabella will need for the winter, which we plan to spend somewhere surprising: Newfoundland! If you’ve been following, you know that we’ve been dreaming of sailing to Newfoundland for a long time now. We are ready to get back to mountain biking, climbing, skiing, ice climbing, and all the outdoor activities we love, and Newfoundland has it all!
It’s time to secure our anchors (we learned that lesson the hard way!). So, we tucked our 45# Mantus in the anchor locker and then triple-secured our 65# Mantus. Some people have suggested keeping both anchors on deck for long passages, but we like to have the option to drop an anchor quickly if we need to!
————————–
Sign up for our email newsletter: http://eepurl.com/hn3Qyv
Acorn to Arabella started as a wooden boat building project in Granby, Massachusetts. Steve began the journey as an amateur wooden boat builder crafting a 38′ wooden sailboat in his backyard: designer William Atkin’s Ingrid with a Stormy Petrel’s gaff rig. These videos follow the journey from tree felling, to lumber milling, to lofting, to the lead keel pour and now sailing the boat—sharing details of the woodworking, carpentry, metal smithing, tool building, and tool maintenance that traditional wooden boats command. This ultimate DIY project continues beyond the boat shop, as Steve and crew travel and learn to cruise aboard the handmade wooden boat that they’ve built. Just kidding about all that, this channel is about a Siberian Laika named Akiva.
————————–
If you are interested in supporting/helping here are a few ways:
https://www.acorntoarabella.com/how-to-help
Acorn to Arabella’s wishlist:
https://www.acorntoarabella.com/wishlistpriority
TotalBoat supports A2A! Please consider using our Total Boat referral code. Click here, then shop: https://www.totalboat.com/acorntoarabella They’ll kick 10% our way!
To offer recurring support via Patreon, CLICK BELOW. Just $5 a month gets you an invite to our monthly patron-only livestream Q&A sessions!
https://www.patreon.com/acorntoarabella
Original Soundtrack available at benfundis.bandcamp.com
FOLLOW US:
Patreon: https://www.patreon.com/acorntoarabella
Instagram: https://www.instagram.com/acorntoarabella/
Facebook: https://www.facebook.com/acorntoarabella
Website: http://www.acorntoarabella.com
This week, we're getting our homebuilt wooden boat ready for her first international passage. Sure, it’s just to Canada, but to us, it’s a big deal!
First up is finishing work on the bowsprit. I needed to get the bow out of our bronze bow roller before we could reinstall it. Thank goodness for clamps and our onboard workbench! Getting the bow out was the easy part, but then I had to install it while bouncing around under the bowsprit in our tender!
Next, we needed to re-waterproof the spot where the mast goes into our forepeak. I scraped off the Flex Tape residue, sanded it, and shellacked it. Then I snugged up the shims holding the main mast in place and wrapped them in a piece of old sailcloth. This serves two purposes: it prevents the shims from poking through the Flex Tape, and it keeps the Flex Tape from adhering directly to the mast.
I also finished the rigging for our new light-wind sail, which we picked up from Doyle Sails. Some might call it a "code zero." Whatever you want to call it, it's going to make a big difference for us when the winds are light. More sailing, the better! One last piece of rigging: a halyard to hoist our quarantine and international flags, now that we're looking at crossing some international boundaries!
With our final to-dos checked off the list, it was time to head from Marion, through the Cape Cod Canal, to Provincetown to meet up with Josh and Erin from the Schooner Hindu! We had a beautiful and uneventful day motoring across Cape Cod Bay.
We arrived in Provincetown just in time for the 4th of July parade and fireworks show. We had a front-row seat from the wave attenuator in the harbor (and Akiva enjoyed it, too, since he got to run free on the floating dock).
Finally, one last trip back to Granby to collect everything Arabella will need for the winter, which we plan to spend somewhere surprising: Newfoundland! If you've been following, you know that we've been dreaming of sailing to Newfoundland for a long time now. We are ready to get back to mountain biking, climbing, skiing, ice climbing, and all the outdoor activities we love, and Newfoundland has it all!
It’s time to secure our anchors (we learned that lesson the hard way!). So, we tucked our 45# Mantus in the anchor locker and then triple-secured our 65# Mantus. Some people have suggested keeping both anchors on deck for long passages, but we like to have the option to drop an anchor quickly if we need to!
--------------------------
Sign up for our email newsletter: http://eepurl.com/hn3Qyv
Acorn to Arabella started as a wooden boat building project in Granby, Massachusetts. Steve began the journey as an amateur wooden boat builder crafting a 38' wooden sailboat in his backyard: designer William Atkin's Ingrid with a Stormy Petrel's gaff rig. These videos follow the journey from tree felling, to lumber milling, to lofting, to the lead keel pour and now sailing the boat—sharing details of the woodworking, carpentry, metal smithing, tool building, and tool maintenance that traditional wooden boats command. This ultimate DIY project continues beyond the boat shop, as Steve and crew travel and learn to cruise aboard the handmade wooden boat that they've built. Just kidding about all that, this channel is about a Siberian Laika named Akiva.
--------------------------
If you are interested in supporting/helping here are a few ways:
https://www.acorntoarabella.com/how-to-help
Acorn to Arabella's wishlist:
https://www.acorntoarabella.com/wishlistpriority
TotalBoat supports A2A! Please consider using our Total Boat referral code. Click here, then shop: https://www.totalboat.com/acorntoarabella They'll kick 10% our way!
To offer recurring support via Patreon, CLICK BELOW. Just $5 a month gets you an invite to our monthly patron-only livestream Q&A sessions!
https://www.patreon.com/acorntoarabella
Original Soundtrack available at benfundis.bandcamp.com
FOLLOW US:
Patreon: https://www.patreon.com/acorntoarabella
Instagram: https://www.instagram.com/acorntoarabella/
Facebook: https://www.facebook.com/acorntoarabella
Website: http://www.acorntoarabella.com
Acorn To Arabella
We are building a 38’ sailboat from stump to ship, once complete she will take us around the world. We hope to inspire and educate as many people as possible along the way. Join us on our journey and let us show you that with a bit of dedication, good company and some old school smarts even the wildest of dreams can be made to come true! For inquiries about collaborating or integrations, please email [email protected].
Channel Information:
Social Media Links:
Note of Recognition for Acorn To Arabella
At WeBoating.com, we profoundly acknowledge the unwavering dedication that Acorn To Arabella and other creators invests in crafting each and every video. Their passion for delivering exceptional content shines through every frame, and it's a labor of love that deserves your attention.
We invite you to watch their captivating videos and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.
We're also inviting you to explore any sponsorships and partnerships highlighted in the video description of "We’re Over-Wintering Where? Getting Ready for Our First International Passage", or directly on YouTube. By considering their offerings or purchasing services and items, you not only support Acorn To Arabella but also the brands and collaborators they're associated with.
If you have any feedback, corrections, or additional information about Acorn To Arabella or their videos, please use the comment form below to share your thoughts with us.
Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!
Acorn To Arabella Lastest Videos
Showing 1-6 of 413 results
Rock Climbing on Shannon Island: Training for a 2,000’ Big Wall in Newfoundland
If you can remember, back when I started this project, I was working full-time as a route setter at a local rock climbing gym. I largely set climbing aside while I built Arabella, but my goal has always been to sail Arabella to remote places where the clim...
Anchored in Terence Bay: It’s Time for Some Rock Climbing
This week, I move the boat and drop anchor in Terence Bay—which is surrounded by some of Nova Scotia’s best climbing areas. But Robin is still making her way back to Canada with the truck and all of our climbing gear. My rock climbing stoke will have t...
Single-Handing the 38’ Wooden Sailboat He Built Himself
You can still contribute to the fight against cancer at https://profile.pmc.org/bf0201 This week, we map out our passage from Shelburne to Lunenburg, NS, making sure to follow a route safely offshore enough to avoid the many shoals and exposed rocks on th...
From P-Town to Nova Scotia: Our First International Sailing Adventure
This week, we’re taking Arabella international—we’re sailing from Provincetown, MA to Shelburne, Nova Scotia. But, before we go too far, we need to calibrate our NEW Pelagic autopilot. After our autopilot broke a few hours into our last multi-day off...
We’re Over-Wintering Where? Getting Ready for Our First International Passage
This week, we're getting our homebuilt wooden boat ready for her first international passage. Sure, it’s just to Canada, but to us, it’s a big deal! First up is finishing work on the bowsprit. I needed to get the bow out of our bronze bow roller befor...
Moving the Diesel Engine Panel & A New Cockpit Nav Station
It’s Arabella Demolition Day, folks! This week, I’m dismantling our on-deck nav station and engine control panel, and rebuilding one big station to house all of our gadgets and gizmos: the chart plotter, wind reader, VHF radio, engine controls, and our...
Something AWESOME is coming!
Be the FIRST to know⛵
Sign up for exclusive updates and be the first to hear when we go live!
Get sneak peeks, exciting announcement, and special content straight to your inbox!
We don’t spam! Read our privacy policy for more info.