Moving the Diesel Engine Panel & A New Cockpit Nav Station
It’s Arabella Demolition Day, folks! This week, I’m dismantling our on-deck nav station and engine control panel, and rebuilding one big station to house all of our gadgets and gizmos: the chart plotter, wind reader, VHF radio, engine controls, and our new Pelagic autopilot…which we hope will be our LAST autopilot for a while.
While I was building Arabella, a few people recommended that I put the engine control panel in the nav station under our dodger, but I was unsure how much the nav station was going to block our view while steering, and wanted to keep it as small as possible. Now that we have a few thousand miles under the keel, I can see that a wider nav station wouldn’t impede our visibility at all…and we’ve had a few electrical issues with the control panel due to exposure and corrosion. It’s time to move this thing…
I’m also going to take the opportunity to swap my 10” and 12” chart plotters, bringing the 12” plotter up on deck.
Step one: dismantle the engine control panel.
Step two: deep dive into the engine room to find the electrical connections, which are somewhat “prepped” to be sliced, diced, and re-wired into the new nav station.
Step three: Dismantle the existing on-deck nav station.
Step four: Build the new nav station, starting with jointing and planing the edge of a few cherry boards. I opted to use TotalBoat’s TotalBond instead of a heavier-duty epoxy, since this isn’t structural. I also opted to do my woodworking in a wood shop instead of on our workbench—huge thank you to Michael for letting me use your shop!
I had to be careful cutting the box joints. I had some margin for error on the panel that wouldn’t be visible on deck, but needed to nail my cuts on the other panel.
With the shape of the box starting to come together, it was time to map out which gadgets and gizmos were going to go where, and start figuring out the best way to run wires to our various marine devices. Once done, it was time to test my wiring—would the engine fire up? Bingo! First try. Love when that happens!
The new nav station looks great, I’m really happy with how it came out.
Then, to circle back to some of the boat work I started last week, Robin and I went through and tightened up all of the new deadeye lacings on the shrouds up by the main mast. I went and tightened up the jib, as well, getting things ready for me to rig our new light wind sail from Doyle Sails.
Tune in again next week, as Arabella gets on the move again…
***
Big thanks to all who donated to Ben’s ride in the Pan Mass Challenge raising funds for cancer research. If you would still like to contribute go to http://profile.pmc.org/bf0201
Sign up for our email newsletter: http://eepurl.com/hn3Qyv
Acorn to Arabella started as a wooden boat building project in Granby, Massachusetts. Steve began the journey as an amateur wooden boat builder crafting a 38′ wooden sailboat in his backyard: designer William Atkin’s Ingrid with a Stormy Petrel’s gaff rig. These videos follow the journey from tree felling, to lumber milling, to lofting, to the lead keel pour and now sailing the boat—sharing details of the woodworking, carpentry, metal smithing, tool building, and tool maintenance that traditional wooden boats command. This ultimate DIY project continues beyond the boat shop, as Steve and crew travel and learn to cruise aboard the handmade wooden boat that they’ve built. Just kidding about all that, this channel is about a Siberian Laika named Akiva.
————————–
If you are interested in supporting/helping here are a few ways:
https://www.acorntoarabella.com/how-to-help
Acorn to Arabella’s wishlist:
https://www.acorntoarabella.com/wishlistpriority
TotalBoat supports A2A! Please consider using our Total Boat referral code. Click here, then shop: https://www.totalboat.com/acorntoarabella They’ll kick 10% our way!
To offer recurring support via Patreon, CLICK BELOW. Just $5 a month gets you an invite to our monthly patron-only livestream Q&A sessions!
https://www.patreon.com/acorntoarabella
Original Soundtrack available at benfundis.bandcamp.com
FOLLOW US:
Patreon: https://www.patreon.com/acorntoarabella
Instagram: https://www.instagram.com/acorntoarabella/
Facebook: https://www.facebook.com/acorntoarabella
Website: http://www.acorntoarabella.com
It’s Arabella Demolition Day, folks! This week, I’m dismantling our on-deck nav station and engine control panel, and rebuilding one big station to house all of our gadgets and gizmos: the chart plotter, wind reader, VHF radio, engine controls, and our new Pelagic autopilot…which we hope will be our LAST autopilot for a while.
While I was building Arabella, a few people recommended that I put the engine control panel in the nav station under our dodger, but I was unsure how much the nav station was going to block our view while steering, and wanted to keep it as small as possible. Now that we have a few thousand miles under the keel, I can see that a wider nav station wouldn’t impede our visibility at all…and we’ve had a few electrical issues with the control panel due to exposure and corrosion. It’s time to move this thing…
I’m also going to take the opportunity to swap my 10” and 12” chart plotters, bringing the 12” plotter up on deck.
Step one: dismantle the engine control panel.
Step two: deep dive into the engine room to find the electrical connections, which are somewhat “prepped” to be sliced, diced, and re-wired into the new nav station.
Step three: Dismantle the existing on-deck nav station.
Step four: Build the new nav station, starting with jointing and planing the edge of a few cherry boards. I opted to use TotalBoat’s TotalBond instead of a heavier-duty epoxy, since this isn’t structural. I also opted to do my woodworking in a wood shop instead of on our workbench—huge thank you to Michael for letting me use your shop!
I had to be careful cutting the box joints. I had some margin for error on the panel that wouldn’t be visible on deck, but needed to nail my cuts on the other panel.
With the shape of the box starting to come together, it was time to map out which gadgets and gizmos were going to go where, and start figuring out the best way to run wires to our various marine devices. Once done, it was time to test my wiring—would the engine fire up? Bingo! First try. Love when that happens!
The new nav station looks great, I’m really happy with how it came out.
Then, to circle back to some of the boat work I started last week, Robin and I went through and tightened up all of the new deadeye lacings on the shrouds up by the main mast. I went and tightened up the jib, as well, getting things ready for me to rig our new light wind sail from Doyle Sails.
Tune in again next week, as Arabella gets on the move again…
***
Big thanks to all who donated to Ben’s ride in the Pan Mass Challenge raising funds for cancer research. If you would still like to contribute go to http://profile.pmc.org/bf0201
Sign up for our email newsletter: http://eepurl.com/hn3Qyv
Acorn to Arabella started as a wooden boat building project in Granby, Massachusetts. Steve began the journey as an amateur wooden boat builder crafting a 38' wooden sailboat in his backyard: designer William Atkin's Ingrid with a Stormy Petrel's gaff rig. These videos follow the journey from tree felling, to lumber milling, to lofting, to the lead keel pour and now sailing the boat—sharing details of the woodworking, carpentry, metal smithing, tool building, and tool maintenance that traditional wooden boats command. This ultimate DIY project continues beyond the boat shop, as Steve and crew travel and learn to cruise aboard the handmade wooden boat that they've built. Just kidding about all that, this channel is about a Siberian Laika named Akiva.
--------------------------
If you are interested in supporting/helping here are a few ways:
https://www.acorntoarabella.com/how-to-help
Acorn to Arabella's wishlist:
https://www.acorntoarabella.com/wishlistpriority
TotalBoat supports A2A! Please consider using our Total Boat referral code. Click here, then shop: https://www.totalboat.com/acorntoarabella They'll kick 10% our way!
To offer recurring support via Patreon, CLICK BELOW. Just $5 a month gets you an invite to our monthly patron-only livestream Q&A sessions!
https://www.patreon.com/acorntoarabella
Original Soundtrack available at benfundis.bandcamp.com
FOLLOW US:
Patreon: https://www.patreon.com/acorntoarabella
Instagram: https://www.instagram.com/acorntoarabella/
Facebook: https://www.facebook.com/acorntoarabella
Website: http://www.acorntoarabella.com
Acorn To Arabella
We are building a 38’ sailboat from stump to ship, once complete she will take us around the world. We hope to inspire and educate as many people as possible along the way. Join us on our journey and let us show you that with a bit of dedication, good company and some old school smarts even the wildest of dreams can be made to come true! For inquiries about collaborating or integrations, please email [email protected].
Channel Information:
Social Media Links:
Note of Recognition for Acorn To Arabella
At WeBoating.com, we profoundly acknowledge the unwavering dedication that Acorn To Arabella and other creators invests in crafting each and every video. Their passion for delivering exceptional content shines through every frame, and it's a labor of love that deserves your attention.
We invite you to watch their captivating videos and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.
We're also inviting you to explore any sponsorships and partnerships highlighted in the video description of "Moving the Diesel Engine Panel & A New Cockpit Nav Station", or directly on YouTube. By considering their offerings or purchasing services and items, you not only support Acorn To Arabella but also the brands and collaborators they're associated with.
If you have any feedback, corrections, or additional information about Acorn To Arabella or their videos, please use the comment form below to share your thoughts with us.
Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!
Acorn To Arabella Lastest Videos
Showing 1-6 of 413 results
Rock Climbing on Shannon Island: Training for a 2,000’ Big Wall in Newfoundland
If you can remember, back when I started this project, I was working full-time as a route setter at a local rock climbing gym. I largely set climbing aside while I built Arabella, but my goal has always been to sail Arabella to remote places where the clim...
Anchored in Terence Bay: It’s Time for Some Rock Climbing
This week, I move the boat and drop anchor in Terence Bay—which is surrounded by some of Nova Scotia’s best climbing areas. But Robin is still making her way back to Canada with the truck and all of our climbing gear. My rock climbing stoke will have t...
Single-Handing the 38’ Wooden Sailboat He Built Himself
You can still contribute to the fight against cancer at https://profile.pmc.org/bf0201 This week, we map out our passage from Shelburne to Lunenburg, NS, making sure to follow a route safely offshore enough to avoid the many shoals and exposed rocks on th...
From P-Town to Nova Scotia: Our First International Sailing Adventure
This week, we’re taking Arabella international—we’re sailing from Provincetown, MA to Shelburne, Nova Scotia. But, before we go too far, we need to calibrate our NEW Pelagic autopilot. After our autopilot broke a few hours into our last multi-day off...
We’re Over-Wintering Where? Getting Ready for Our First International Passage
This week, we're getting our homebuilt wooden boat ready for her first international passage. Sure, it’s just to Canada, but to us, it’s a big deal! First up is finishing work on the bowsprit. I needed to get the bow out of our bronze bow roller befor...
Moving the Diesel Engine Panel & A New Cockpit Nav Station
It’s Arabella Demolition Day, folks! This week, I’m dismantling our on-deck nav station and engine control panel, and rebuilding one big station to house all of our gadgets and gizmos: the chart plotter, wind reader, VHF radio, engine controls, and our...
Something AWESOME is coming!
Be the FIRST to know⛵
Sign up for exclusive updates and be the first to hear when we go live!
Get sneak peeks, exciting announcement, and special content straight to your inbox!
We don’t spam! Read our privacy policy for more info.