YouTube Videos

2008 Beneteau Oceanis 46 From the day we bought Sunday a shroud was showing signs of corrosion that we paid close attention too, along with damaging our forestay crossing the Aegean Sea and our insurance not covering anything to do with the mast/rigging (...

Replacing a boat hatch seal is not as easy as it looks - especially if your hatch is old. You'll want to watch this video to determine if it's worth your time and effort to replace the seal or simply get a new hatch! At the very least you'll know what prob...

Time to get the boat ready again. It felt strange be stuck for 5 weeks on anchor without being able to manouver. Friends come over to help us to get the rudder back in the water. The dropping was an easy job, but our rudder is floating in the water and we ...

After we dropped our rudder in the last episode, Mario starts to repair it. We make a few holes in it to let the water drip out just to find out the damage is not as bad as we thougt. The foam is a little bit wet, but not as bad as it could be. But it well...

---- EVERYTHING YOU NEED TO KNOW ---- Like and Subscribe to follow along our Journey. This video will pretty show you everything there is to know about servicing your Tohatsu / Mercury / Nissan / Yamaha outboard motor. I go through it all from the fuel ...

Boats cost a lot to maintain. We divide those costs into categories so we can budget our expenses. That usually comes out to 6-8% of the value of the boat per year. Our annual cruising budget video: https://youtu.be/JJ_xvHmvB0E iTunes Podcast: https://po...

We replaced every Thru Hull and Seacock on Sunday with TruDesign. This is a simple step-by-step guide on how we did it.

Clark gives a quick, easy, straightforward "How to Change Your Oil" demonstration on our 4-stroke, Suzuki DF20 outboard. This is how we change the oil on our Suzuki, but it's the same steps for Tohatsu, Yamaha, Mercury, or other 4-stroke outboards. (Just n...

With the boat lifting onto the hardstand last week we commence our boat works which predominately included doing some repairs around the prop shaft, sanding back the keel removing rust spots and filling and fairing, epoxy, prime underneath and finish off w...

On this week’s episode we go through the preparation for our upcoming trip to Colombia, where we will be doing maintenance on Freedom! Give it thumbs a up if you liked this episode! Get your Sailing Into Freedom Crew T-shirt: https://teespring.com/s...

After a lot of hard work, we are anxious to get this party started! Our Leopard 46 catamaran Clarity just needs a couple more things attended to, and Miami is the place for that. Also an excellent jumping off point for the islands! Zucchini bread recipe: ...

Truly a nail-biter for us as we squeeze our fat cat into a slip with just a few inches to spare. But it had to be done! Hauling out for the usual bottom jobs, but also for a complete transformation of Clarity's look. On the way down the coast, we talk more...