Tig welding YouTube Videos
Showing 1-11 of 11 results
CUTTING IT ALL DOWN! Transforming our Custom Built Aluminum Sailboat – Ep 230
Join us as we set sail from Ile Fourchue (an island of St. Barth's) to Sint Maarten/St. Martin for a major DIY welding project on our custom aluminum sailboat. We’ll be showing you how we’re preparing our boat for offshore adventures by completing cru...
THIS COULD BE EXACTLY WHAT WE NEED FOR WORLD CRUISING – Ep 205
We continue refitting our custom aluminum sailboat in Panama getting her ready for offshore sailing and for living off the grid. We're working on the dinghy that came with the boat and Travis tries TIG welding for the first time. NEW VIDEOS EVERY SUNDAY! ...
Unbelievable Metamorphosis! Witness Our Catamaran Transform Before Your Eyes – Ep305
I just couldn't leave it alone , the bow modification that had to happen has taken on a another level of effort. There was only one way to build our bows up to the required buoyancy. Solid , foam core bows that are not only void free, but will provide an a...
TRITEIA RUDDER REPAIR! Getting The Rudder Tangs Bronze Welded at Keehi Marine Center on Oahu
Episode #239 : Season 8 : The Hawaiian Adventures Hello Friends, It's hard to believe this moment has finally arrived. After diving on the rudder 5 times trying to remove the tiller shaft in the water and then waiting nearly 4 months for my turn to get ...
POWER SERIES PART 1: SOLAR POWER AND INSTALL//Solar Array On A Sailboat-Episode 10
Solar is a hot commodity and we are taking full advantage of this free resource! We fabricated our support structure ourselves as well as installed everything on our own. This video gives you a bird's eye view of how we built this crazy big array. If you w...
Salt & Tar: Episode 83-MAST COLLAR w/Rolf!
Two major things before the main mast goes up: build the mast collar for the stays and make the shrouds. When we step the mast we'll need some temporary lines to hold it up. We'll hang several blocks from the mast collar to do this. Rolf is kind enough to ...
SV Seeker Live – June 10, 2017 – Davit Winch, Deck Bolts, Block & Tackle
Looking for ideas about manual and automatic system for lifting the tender. FaceBook: https://www.facebook.com/SailingVesselSeeker/ Blog: http://www.svseeker.com/wp/blog/ Store: http://www.svseeker.com/wp/sv-seeker-2/shop/![Pulpit Repair and Sailing to Culebra — Sailing Uma [Step 74]](https://i.ytimg.com/vi_webp/Ndus_c-yd-0/maxresdefault.webp)
Pulpit Repair and Sailing to Culebra — Sailing Uma [Step 74]
In this step, we finally get to fix our bow pulpit thanks to Luis, our new hero! He picked us up, drove us back to San Juan and spent 2 days helping us put Uma's bow back together. With that done, it was time to weigh anchor and set sail for Culebra. If ...
Unconventional german welder SAVES my SAILBOAT in Panama – UNTIE THE LINES #30
Big progress on the project list this week. I finally got Karl's holes welded. It was quite exciting and I am really happy that it is done. I also started to use some paint remover to go down to bare aluminum so it will be easier to apply the etch primer....