Watch Sailing & Boating Adventures Around the World tagged “Cutlass bearing replacement”

Explore sailing, boating, and water sports through our curated video archive. From epic sea voyages to serene diving escapes, discover unforgettable adventures from top YouTube creators. Start your journey. Dream big. Sail far.

Showing 1-12 of 12 results
Don’t do what we did!! 🧊 #sailboat #boatwork #fail #diy
Sailing Jibsea
Botched Cutlass Bearing & Prop Shaft Install and Here’s How We Fixed It – Ep 247
Sailing Jibsea

Botched Cutlass Bearing & Prop Shaft Install and Here’s How We Fixed It – Ep 247

Join us as we continue with the replacement of our prop shaft and cutlass bearing on our custom aluminum sailboat while hauled out in Conception Bay South, Newfoundland. Rather than a how-to DIY, we show you what not to do and the challenges we faced and h...
Discovering a problem that could sink our sailing plans.  Ep 246
Sailing Jibsea

Discovering a problem that could sink our sailing plans. Ep 246

Join us as we continue exploring the rugged and breathtaking Newfoundland coastline! 🌊In this episode, we are exploring Conception Bay South, haul out our aluminum sailboat for a big boat project, and then head back on the water to explore hidden coves ...
Safely Use the Prusik Hitch as a Solo Sailor
Pacific Solo

Safely Use the Prusik Hitch as a Solo Sailor

I have been practicing knots and learning two new ones. The Flying Bowline is fun and can be used when need to create a loop very quickly for docking or throwing to someone overboard, and the Prusik enables me as a solo sailor to climb the mast with a saf...
I HAVE A PROBLEM – and I hope it’s just the barnacles!
Pacific Solo

I HAVE A PROBLEM – and I hope it’s just the barnacles!

I have noticed that Wahine has been a tad slower of late and when motoring I am getting a slight shudder between 2500 - 3000 rpm. It's been a year since I painted her bottom so I am `hauling her out for a day to inspect, clean, and paint. #solosailor #...
E08 Haul Out Part 2 of 3 – Cutlass bearing, dripless shaft seal and prop polishing
Sailing Nendaz

E08 Haul Out Part 2 of 3 – Cutlass bearing, dripless shaft seal and prop polishing

Join us weekly for more boat restoration fun! Favourite tool of the day - the hammer. In this episode we remove the propshaft so that we can change the shaft seal to a more modern dripless system. So we had to figure out how to remove a prop and the the ...
EP. 6 | Changing our CUTLASS BEARING Underwater! (Mechanics said it wasn’t possible)
Sailing Naida

EP. 6 | Changing our CUTLASS BEARING Underwater! (Mechanics said it wasn’t possible)

In this week's episode, Andre found our cutlass bearing to be bad so we get that replaced in the water, which typically requires hauling the boat out.
Replacing The Cutless Bearing & Installing A PSS Dripless Shaft Seal | Sailboat Story 192
Sailboat Story

Replacing The Cutless Bearing & Installing A PSS Dripless Shaft Seal | Sailboat Story 192

The Swabby, AKA Molly, AKA my best boat helper, accompanies me to FL where we get to work replacing a worn out cutless bearing, reinstalling the shaft, and installing a brand new PSS dripless shaft seal. Thank you for watching! ~ Ben, Tambi, & Molly ...
Removing The Propeller, Shaft, Coupler, Stuffing Box & Cutless Bearing | Sailboat Story 160
Sailboat Story

Removing The Propeller, Shaft, Coupler, Stuffing Box & Cutless Bearing | Sailboat Story 160

The sailboat refit has officially begun and that means that we have to take a lot of things apart before we can start putting it all back together again. We pump contaminated diesel fuel out of the boat, take off the Max Prop, disassemble the shaft coupler...
Boat Maintenance – Rig Service part 3 – Hallberg Rassy 54 Cloudy Bay – Oct-Nov 2020. Season20 Ep23
Sail Cloudy Bay

Boat Maintenance – Rig Service part 3 – Hallberg Rassy 54 Cloudy Bay – Oct-Nov 2020. Season20 Ep23

Series of videos which covers removing the rig to replace the standing rigging and service all the rig systems, plus some other winter maintenance aspects. This Part 3 covers removal of vang and goose-neck mast fittings; servicing winches; dismantling the...
SAILBOAT MAINTENANCE: Replacing the stern seal, cutlass bearing, and aligning the prop shaft.  #74
Ryan & Sophie Sailing

SAILBOAT MAINTENANCE: Replacing the stern seal, cutlass bearing, and aligning the prop shaft. #74

Welcome to the yard, and one of the first project of our season prep! Ryan wanted to change the cutlass bearing, which was due for a replacement after 13 years of good and loyal services. Since replacing the cutlass bearing involved removing the prop s...
What’s Up With Our Cutlass Bearing? | Learning the Lines [Casual Friday] – DIY Sailing
Learning the Lines

What’s Up With Our Cutlass Bearing? | Learning the Lines [Casual Friday] – DIY Sailing

You answered our poll and we're delivering. This is the first of many "Casual Friday" episodes coming your way. Who's excited for more content?! Our old cutlass bearing looks to be corroded in place. Can we leave it there, take out the old rubber, and ins...
Epic water experiences, one click away.

Something AWESOME is coming!
Be the FIRST to know⛵

Sign up for exclusive updates and be the first to hear when we go live!
Get sneak peeks, exciting announcement, and special content straight to your inbox!

We don’t spam! Read our privacy policy for more info.


WeBoating
Logo
Shopping cart