Reset Password

USD 0 to USD 10,000

1965 sailboat YouTube Videos

Showing 1-10 of 10 results
Installing a New Bronze Stern Tube on an Alberg 30 at The Ventura Harbor Boat Yard
Sailing Triteia
Installing a New Bronze Stern Tube on an Alberg 30 at The Ventura Harbor Boat Yard
SEASON 6 / The Haul Out : Episode #130 : Flying the Engine and Installing the Tube Hello Friends! On this weeks episode we start out by thanking out Patrons for their continuing support! THANK YOU! We also thank our Super Chat contributors from the live...
Installing a Whale Gusher Foot Pump on an Alberg 30 Sailboat (PART 1)
Sailing Triteia
Installing a Whale Gusher Foot Pump on an Alberg 30 Sailboat (PART 1)
Ahoy Friends, This week we start the process of installing a Whale Gusher Foot Pump. The first step in this process was to determine where it made sense to install, on my 1965 Alberg 30 I decided to recess it under the stove enclosure in the starboard sto...
SV TRITEIA sails home from Catalina Harbor and into a New Year!
Sailing Triteia
SV TRITEIA sails home from Catalina Harbor and into a New Year!
Season 4 | Episode 72 | Sailing Home Wing and Wing from Catalina Island. On this episode we untie at Catalina Harbor and cruise by Adam and Kat's boat on our way out into the Pacific Ocean heading for home. With light winds forecasted I hanked on our Dr...
Wiring up the AC power onboard Sailing Vessel Triteia
Sailing Triteia
Wiring up the AC power onboard Sailing Vessel Triteia
Navigation Station build out part 3: Hello Friends, On this episode we get into wiring up the AC power. This is the part of the project I was the most nervous about and AC / Shore power is very dangerous and no joke. I made it out alive and got the AC...
Laminating a Custom Stove Enclosure for an Alberg 30 Sailboat Refit
Sailing Triteia
Laminating a Custom Stove Enclosure for an Alberg 30 Sailboat Refit
Hello Friends, On this episode (Part 3) we finish laminating and trimming the alcohol stove enclosure for the boat. This is a slow process that takes days as you can only laminate one piece at a time, wait at least 24 hours then trim it off and do the ne...
Test fitting a new stove enclosure on a 1965 Alberg 30 sailboat refit
Sailing Triteia
Test fitting a new stove enclosure on a 1965 Alberg 30 sailboat refit
Hello Friends, On this episode we head to the boat to test fit the enclosure and make sure all the measurements line up. After getting the stove set down in the brackets and seeing how she swings we head back ashore and get to work on preparing the bulkhe...
Installing a Chart Table on an Alberg 30 Sailboat with Camille and Steady
Sailing Triteia
Installing a Chart Table on an Alberg 30 Sailboat with Camille and Steady
Hello Friends! Here is the 2nd part of the Chart Table Installation video! We FINALLY got it done and installed.... (now to finish both switch panels and complete the new nav station). Thanks to Camille and Mr. Steady (the Australian Cattle Dog) for hel...
Installing a Chart Table on an Alberg 30 Sailboat with Camille on Sailing Vessel Triteia – Part 1
Sailing Triteia
Installing a Chart Table on an Alberg 30 Sailboat with Camille on Sailing Vessel Triteia – Part 1
On this episode we start the installation of my new chart table and I introduce my first mate Camille to my YouTube family! For all of you who follow me on instagram Camille is a familiar face but this is our first video together with many more coming in...
Removing the Icebox on an Alberg 30 – Sailing Vessel Triteia
Sailing Triteia
Removing the Icebox on an Alberg 30 – Sailing Vessel Triteia
Ahoy Friends! Here is another one of my project throw back videos. In this video you get to see me go through all of the steps of removing the factory Ice Box from my 1965 Alberg 30. The chart table and nav station will later occupy the space this outdate...
Sailing Vessel Triteia – The Iron Genny – Part III – Episode 8 – Hooking Up New Diesel Engine
Sailing Triteia
Sailing Vessel Triteia – The Iron Genny – Part III – Episode 8 – Hooking Up New Diesel Engine
On this episode of Sailing Vessel Triteia I dive below to check the propellers position before setting the engine in its final spot and drilling the new holes in the engine bracket. I then continue on hooking up the control cables, exhaust system and fuel ...