Restarting The Diesel Engine - Episode 313 - Acorn to Arabella: Journey of a Wooden Boat

Beam Dream is clinically shown to help you fall asleep faster, sleep through the night and wake up refreshed. Click https://shopbeam.com/AcorntoArabella and use code ACORN to get up to 35% off with my exclusive discount.

Steve, Robin, and Akiva are spending the week at a mooring in Mattapoisett while they take care of a few important to-dos before beginning their journey north up the coast of Maine.

If you tuned in to last week’s episode, you know that Arabella's engine died just outside the channel going into Cuttyhunk Island. Well, it’s time to see if any permanent damage was done, and if Arabella will be able to fire up its engine again soon.

After an oil change and some coaxing, the engine did fire up and ran for a few minutes at idle. However, the oil light came back on pretty much immediately. With plenty of oil and solid oil pressure, Steve is perplexed by what the issue could be...so he called in the experts at Nanni to come take a look.

Turns out, there was an airlock in the motor that prevented it from receiving fuel. After some exploring, the airflow is back to normal, the engine is getting fuel, and no serious damage has been done. Phew...

Another important to-do is getting Starlink up and running on DC power. While in Harwich Port, Steve and Robin ran their Starlink dish off of shore power. Now that they’re cruising again, there’s no access to shore power, and while Starlink could technically run off their inverters, it’s more efficient to run it off of DC power. Of course, there’s little to no info on how to perform this conversion. Steve's first few attempts unfortunately failed.

After getting some useless information from a Starlink tech, Robin and Steve phoned a few friends, who were able to collaborate on a fix. Starlink is officially running off of DC power and good to go, just in time for cruising season. Robin is thrilled to be able to run her business from the cockpit this summer!

Of course, since Starlink is now drawing on the boat's battery bank, the amount of power being generated on deck needs to increase. Installing a few more solar panels should do the trick. There are a few more rigid solar panels that could provide more power...but will it be enough to power Starlink? Only time will tell...

--------------------------

Sign up for our email newsletter: http://eepurl.com/hn3Qyv

Acorn to Arabella started as a wooden boat building project in Granby, Massachusetts. Steve began the journey as an amateur wooden boat builder crafting a 38' wooden sailboat in his backyard: designer William Atkin's Ingrid with a Stormy Petrel's gaff rig. These videos follow the journey from tree felling, to lumber milling, to lofting, to the lead keel pour and now sailing the boat—sharing details of the woodworking, carpentry, metal smithing, tool building, and tool maintenance that traditional wooden boats command. This ultimate DIY project continues beyond the boat shop, as Steve and crew travel and learn to cruise aboard the handmade wooden boat that they've built. Just kidding about all that, this channel is about a Siberian Laika named Akiva.

--------------------------

If you are interested in supporting/helping here are a few ways:
https://www.acorntoarabella.com/how-to-help
Acorn to Arabella's wishlist:
https://www.acorntoarabella.com/wishlistpriority

TotalBoat supports A2A! Please consider using our Total Boat referral code. Click here, then shop: https://www.totalboat.com/acorntoarabella They'll kick 10% our way!

To offer recurring support via Patreon, CLICK BELOW. Just $5 a month gets you an invite to our monthly patron-only livestream Q&A sessions!
https://www.patreon.com/acorntoarabella

Original Soundtrack available at benfundis.bandcamp.com

FOLLOW US:
Patreon: https://www.patreon.com/acorntoarabella
Instagram: https://www.instagram.com/acorntoarabella/
Facebook: https://www.facebook.com/acorntoarabella
Website: http://www.acorntoarabella.com

Support Acorn To Arabella

At WeBoating.com, we profoundly acknowledge the unwavering dedication that Acorn To Arabella invests in crafting each and every video or voyage. Their passion for delivering exceptional ocean content shines through every frame, and it's a labor of love that deserves your attention.

We invite you to watch their captivating videos here and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.

We're also inviting you to explore the gear, sponsorships, and boat partnerships highlighted in the "Restarting The Diesel Engine - Episode 313 - Acorn to Arabella: Journey of a Wooden Boat" video description, or directly on YouTube. By engaging with these offerings or purchasing services and items, you directly support Acorn To Arabella, their collaborators, and the brands they're associated with.

To ensure you never miss an offshore update, consider visiting their official YouTube Channel to subscribe, like, and join their community directly.

If you have any feedback, corrections, or additional information about Acorn To Arabella or their videos, please use the comment form below to share your thoughts with us.

Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!

Restarting The Diesel Engine – Episode 313

In this episode of Acorn to Arabella, Steve, Robin, and AKA face the challenge of restarting their diesel engine after experiencing an issue while at Cudy Hunk Island. Follow their journey as they troubleshoot and find solutions, ultimately aiming to begin their voyage back to the coast of Maine.
Hitchhiking With A Mooring – Key Points:
  • Steve realized there was an issue with fuel flow, causing the motor not to start.
  • Jesse pumped, bled, and drained the system, fixing the fuel flow issue.
  • The team successfully picked up their first mooring of the season.

  • Converting Starlink To DC Power:
  • The team previously attempted to convert Starlink to use DC power using an Amazon conversion kit, but faced challenges.
  • With guidance from Reddit threads and blog articles, the team finally succeeded in running Starlink on battery power.

  • Enhancing Solar Panel Power:
  • The existing flexible solar panels were not producing enough power for the new requirements (Starlink, fridge).
  • Adding two more rigid solar panels significantly improved battery charging capabilities.
  • The team needs to consider a long-term solution for the placement of these additional panels. For this episode of Acorn to Arabella, Steve and Jesse wanted to ensure their diesel engine was running smoothly before setting sail again. They successfully restarted the engine but faced unexpected challenges along the way. Additionally, the team managed to resolve their Starlink conversion issue and enhance their solar power generation capabilities for an improved boating experience. With these problems addressed and a plan in place for their rigid solar panels, Steve and Jesse are now well-prepared to continue their journey back to the coast of Maine. This episode highlights the importance of continuous troubleshooting and adapting strategies when faced with unexpected setbacks during a lengthy boat voyage.

    Latest Episodes from Acorn To Arabella

    Explore the most recent voyages. Subscribe to the channel to never miss an update!

    Showing 1-6 of 481 results
    A Quick Update From Ben
    Acorn To Arabella

    A Quick Update From Ben

    Check out this link and help in the fight against cancer. 100% of all funds raised go directly to research and patient care at Dana Farber.
    saying-goodbye-to-rock-climbing-in-newfoundland
    Acorn To Arabella

    saying-goodbye-to-rock-climbing-in-newfoundland

    One last goodbye to a place that became so much more than another stop on the map 🇨🇦 Newfoundland gave us wild coastlines, big adventures, new friendships, and a whole lot of memories we’ll be carrying south with us. It’s hard to leave. But something tells us this isn’t goodbye forever. Thanks fo...
    Saying Goodbye to Newfoundland—and the Man Who Inspired Arabella
    Acorn To Arabella

    Saying Goodbye to Newfoundland—and the Man Who Inspired Arabella

    After nearly a year in Canadian waters, it's finally time for Arabella to say goodbye to Newfoundland and begin the long journey south. But there is still one adventure left. Steve returns to the Nuddick for a final attempt at establishing a new multi-pitch climbing route, this time with his l...
    Boat Work & Big Walls | Expedition Life #Shorts #ExploreCanada
    Acorn To Arabella

    Boat Work & Big Walls | Expedition Life #Shorts #ExploreCanada

    Developing a new climbing route isn't just about climbing. It's hauling gear, improving the boat, making the route safer, and solving one problem after another. Every project brings us one step closer to establishing a new first ascent on Newfoundland's remote south coast. 👉 Watch t...
    Upgrading the Rudder and Another Trek To The Cliff
    Acorn To Arabella

    Upgrading the Rudder and Another Trek To The Cliff

    After 3 years of service Steve makes a big change to the rudder head taking off the bronze hardware and replacing it with a more traditional wooden setup. Not too much bronze has been removed from Arabella (fortunately!), but this change will make steering much more pleasant. Then the crew makes o...
    Climbing an Unexplored Wall in Remote Newfoundland 🧗 #Shorts #RockClimbing
    Acorn To Arabella

    Climbing an Unexplored Wall in Remote Newfoundland 🧗 #Shorts #RockClimbing

    After sailing to Newfoundland’s remote south coast, we established a wilderness base camp beneath the Nuddick and began exploring a granite wall that, as far as anyone knows, has never been climbed. This remote Newfoundland climbing expedition has taken months of planning, multiple gear hauls throu...
    Browse All Videos
    WeBoating
    Logo
    Shopping cart