Fixing a Leaky Boat Deck & More Boat Maintenance Fun
After our offshore run, I promised Robin that I would wait for her in Beaufort so she could see the wild horses on Carrot Island, explore the shops in downtown Beaufort, and visit the Outer Banks before our run back North. While waiting, I tackle some boat maintenance projects, namely fixing our leaky deck. But more on that later…
Beaufort was an interesting place to anchor. Because of the wind and tides, the boats in the anchorage all sit differently. We came pretty close to playing bumper boats with our neighbor. But I enjoyed a surprise wooden boat show by the harbor, and a pretty impressive farmer’s market! The Beaufort experience was really a 10 out of 10!
Beaufort was also a great place for me to tackle some boat work. First task: fixing our leaky boat deck. We’ve been getting some drips in the forepeak, and I think it all boils down to an issue with the way we pitched and waterproofed the deck in the first place. Basically, I think the pitch didn’t make it deep enough into the grooves between our deck planks, which created a pocket of air. As we’ve migrated to warmer weather, my thought is that the air warmed up, ultimately expanding and causing the pitch to bubble, rupture…and leak.
Pitch is an interesting substance. It’s mostly solid at room temperature, and liquifies when heated (though, even in its liquid state, it’s still 1,000x more viscous than water).
I spent a few long, tedious days just hammering the pitch as deep as I could, identifying where more pitch was needed to fill the gaps. And then the rain came. And the forepeak stayed dry. What can I say: good deck work works ;-)
Next up on the to-do list is fixing our windlass. We lost a set screw, and fortunately the local hardware store had just the key stock we needed for the job (and I had just the vice to finish the job).
Now it’s time to go play. Robin wanted to go explore Beaufort’s downtown area, which is filled with shops and coffee…two of her favorite things. But, along the way, we found where the wooden boats get built…and we had to pop in to check it out.
After exploring the town (and procuring coffee, of course), we set sail for Okracoke Island…and a beautiful sail it was.
Join us next week in the Outer Banks, and stay tuned for our passage back to Massachusetts.
--------------------------
Sign up for our email newsletter: http://eepurl.com/hn3Qyv
Acorn to Arabella started as a wooden boat building project in Granby, Massachusetts. Steve began the journey as an amateur wooden boat builder crafting a 38' wooden sailboat in his backyard: designer William Atkin's Ingrid with a Stormy Petrel's gaff rig. These videos follow the journey from tree felling, to lumber milling, to lofting, to the lead keel pour and now sailing the boat—sharing details of the woodworking, carpentry, metal smithing, tool building, and tool maintenance that traditional wooden boats command. This ultimate DIY project continues beyond the boat shop, as Steve and crew travel and learn to cruise aboard the handmade wooden boat that they've built. Just kidding about all that, this channel is about a Siberian Laika named Akiva.
--------------------------
If you are interested in supporting/helping here are a few ways:
https://www.acorntoarabella.com/how-to-help
Acorn to Arabella's wishlist:
https://www.acorntoarabella.com/wishlistpriority
TotalBoat supports A2A! Please consider using our Total Boat referral code. Click here, then shop: https://www.totalboat.com/acorntoarabella They'll kick 10% our way!
To offer recurring support via Patreon, CLICK BELOW. Just $5 a month gets you an invite to our monthly patron-only livestream Q&A sessions!
https://www.patreon.com/acorntoarabella
Original Soundtrack available at benfundis.bandcamp.com
FOLLOW US:
Patreon: https://www.patreon.com/acorntoarabella
Instagram: https://www.instagram.com/acorntoarabella/
Facebook: https://www.facebook.com/acorntoarabella
Website: http://www.acorntoarabella.com
Acorn To Arabella
Steve Denette: The 5th-generation farmer who built the 38ft wooden ketch Arabella from the stumps of his family farm, now pioneering big-wall climbing in Newfoundland.
Channel Information:
Social Media Links:
Support Acorn To Arabella
At WeBoating.com, we profoundly acknowledge the unwavering dedication that Acorn To Arabella invests in crafting each and every video or voyage. Their passion for delivering exceptional ocean content shines through every frame, and it's a labor of love that deserves your attention.
We invite you to watch their captivating videos here and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.
We're also inviting you to explore the gear, sponsorships, and boat partnerships highlighted in the "Fixing a Leaky Boat Deck & More Boat Maintenance Fun" video description, or directly on YouTube. By engaging with these offerings or purchasing services and items, you directly support Acorn To Arabella, their collaborators, and the brands they're associated with.
To ensure you never miss an offshore update, consider visiting their official YouTube Channel to subscribe, like, and join their community directly.
If you have any feedback, corrections, or additional information about Acorn To Arabella or their videos, please use the comment form below to share your thoughts with us.
Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!
After our offshore run, I promised Robin that I would wait for her in Beaufort so she could see the wild horses on Carrot Island, explore the shops in downtown Beaufort, and visit the Outer Banks before our run back North. While waiting, I tackle some boat maintenance projects, namely fixing our leaky deck. But more on that later…
Beaufort was an interesting place to anchor. Because of the wind and tides, the boats in the anchorage all sit differently. We came pretty close to playing bumper boats with our neighbor. But I enjoyed a surprise wooden boat show by the harbor, and a pretty impressive farmer’s market! The Beaufort experience was really a 10 out of 10!
Beaufort was also a great place for me to tackle some boat work. First task: fixing our leaky boat deck. We’ve been getting some drips in the forepeak, and I think it all boils down to an issue with the way we pitched and waterproofed the deck in the first place. Basically, I think the pitch didn’t make it deep enough into the grooves between our deck planks, which created a pocket of air. As we’ve migrated to warmer weather, my thought is that the air warmed up, ultimately expanding and causing the pitch to bubble, rupture…and leak.
Pitch is an interesting substance. It’s mostly solid at room temperature, and liquifies when heated (though, even in its liquid state, it’s still 1,000x more viscous than water).
I spent a few long, tedious days just hammering the pitch as deep as I could, identifying where more pitch was needed to fill the gaps. And then the rain came. And the forepeak stayed dry. What can I say: good deck work works 😉
Next up on the to-do list is fixing our windlass. We lost a set screw, and fortunately the local hardware store had just the key stock we needed for the job (and I had just the vice to finish the job).
Now it’s time to go play. Robin wanted to go explore Beaufort’s downtown area, which is filled with shops and coffee…two of her favorite things. But, along the way, we found where the wooden boats get built…and we had to pop in to check it out.
After exploring the town (and procuring coffee, of course), we set sail for Okracoke Island…and a beautiful sail it was.
Join us next week in the Outer Banks, and stay tuned for our passage back to Massachusetts.
————————–
Sign up for our email newsletter: http://eepurl.com/hn3Qyv
Acorn to Arabella started as a wooden boat building project in Granby, Massachusetts. Steve began the journey as an amateur wooden boat builder crafting a 38′ wooden sailboat in his backyard: designer William Atkin’s Ingrid with a Stormy Petrel’s gaff rig. These videos follow the journey from tree felling, to lumber milling, to lofting, to the lead keel pour and now sailing the boat—sharing details of the woodworking, carpentry, metal smithing, tool building, and tool maintenance that traditional wooden boats command. This ultimate DIY project continues beyond the boat shop, as Steve and crew travel and learn to cruise aboard the handmade wooden boat that they’ve built. Just kidding about all that, this channel is about a Siberian Laika named Akiva.
————————–
If you are interested in supporting/helping here are a few ways:
https://www.acorntoarabella.com/how-to-help
Acorn to Arabella’s wishlist:
https://www.acorntoarabella.com/wishlistpriority
TotalBoat supports A2A! Please consider using our Total Boat referral code. Click here, then shop: https://www.totalboat.com/acorntoarabella They’ll kick 10% our way!
To offer recurring support via Patreon, CLICK BELOW. Just $5 a month gets you an invite to our monthly patron-only livestream Q&A sessions!
https://www.patreon.com/acorntoarabella
Original Soundtrack available at benfundis.bandcamp.com
FOLLOW US:
Patreon: https://www.patreon.com/acorntoarabella
Instagram: https://www.instagram.com/acorntoarabella/
Facebook: https://www.facebook.com/acorntoarabella
Website: http://www.acorntoarabella.com
Latest Episodes from Acorn To Arabella
Explore the most recent voyages. Subscribe to the channel to never miss an update!
A Quick Update From Ben
Check out this link and help in the fight against cancer. 100% of all funds raised go directly to research and patient care at Dana Farber.
saying-goodbye-to-rock-climbing-in-newfoundland
One last goodbye to a place that became so much more than another stop on the map 🇨🇦 Newfoundland gave us wild coastlines, big adventures, new friendships, and a whole lot of memories we’ll be carrying south with us. It’s hard to leave. But something tells us this isn’t goodbye forever. Thanks fo...
Saying Goodbye to Newfoundland—and the Man Who Inspired Arabella
After nearly a year in Canadian waters, it's finally time for Arabella to say goodbye to Newfoundland and begin the long journey south. But there is still one adventure left. Steve returns to the Nuddick for a final attempt at establishing a new multi-pitch climbing route, this time with his l...
Boat Work & Big Walls | Expedition Life #Shorts #ExploreCanada
Developing a new climbing route isn't just about climbing. It's hauling gear, improving the boat, making the route safer, and solving one problem after another. Every project brings us one step closer to establishing a new first ascent on Newfoundland's remote south coast. 👉 Watch t...
Upgrading the Rudder and Another Trek To The Cliff
After 3 years of service Steve makes a big change to the rudder head taking off the bronze hardware and replacing it with a more traditional wooden setup. Not too much bronze has been removed from Arabella (fortunately!), but this change will make steering much more pleasant. Then the crew makes o...