28 June 2024 Unboxing G11 Epoxylaminate mastholder

Hello friends, today is an important day as I unbox this G11 epoxylaminate mast holder that came from Handel LXO. The ears installation is very important, so let’s start with that.

To cut the pieces, I will use a knife and a sister. These are important tools for this process.

The G11 epoxylaminate mast holder consists of four parts: one M holder, two M holders, three M holders, and four M holders. We will start by installing the first one here and if water enters, I will make a little hole in the bottom to let it out.

Next, I will cut this part into two sections, with one staying here going up to here. The third one will go up to here as well, while the fourth one comes back down here.

The rouer axis is located in front of this; it’s like a Y but not exactly the same shape.

Now, we’ll add the big M holder parts, with three of them in total. I’ll then grab another one that is no longer natural and a bit too short.

This second one will be used as well, even though it’s shorter than the others.

I’d like to thank Häger and all the people in Black who have done a fantastic job with this. It was lucky that I managed to get hold of it and they deserve my gratitude.

Sven Yrvind Unboxes G11 Epoxylaminate Mastholder

On top of the boat, there are two M holders located in the middle. Over here, we have a fourth M that is larger and stronger.

Exploring the G11 Epoxylaminate Mastholder Components

I’ve mentioned before the off one, which is located over here. The r AIS comes in front of that, as shown earlier.

The installation process for this G11 epoxy laminate pipe has been a bit worrisome because getting it in the correct dimensions can be quite difficult; however, now I feel more relaxed and comfortable with how everything is turning out.

Installation Woes Addressed

This mast holder will significantly impact sailing. As we continue to explore and learn more about it, let’s celebrate this momentous achievement!

Now that we have completed the installation process, we can look forward to many exciting journeys with the G11 epoxylaminate mast holder.

Stay tuned for more updates and information as we dive deeper into Sven Yrvind’s amazing creations. Be sure not to miss out on any thrilling adventures in the future!