Protecting Our Hardwood Trim with Clear Epoxy (MJ Sailing - Ep 350)

From epoxy challenges on our wood trim to an inspiring interview with Steve of Acorn to Arabella, this episode is packed with stories and skills!

In this episode, we feature the hardwood trim, which we had mentioned in our interior time lapse video, went to replace the painters tape and found the seal was not good and some paint had leaked through.

Before we go any further with priming and painting we want to get the trim protected so this does not happen again. Cleaning up the wood and taping the outside edges, Matt mixed up small batches of our Total Boat epoxy and gave a thin coat to the wood. Eventually this will be sanded and varnished, but it does ease our minds going forward.

Once that had cured it was time to tape the wood back up and move forward with our next and final coat of finish primer. To get it as flat as possible, we thinned it 20%, 13% with reducer and 7% with an accelerator.

Except for just a few runs, the finish was flawless. We are now in the process of sanding it all down with 320 grit sandpaper, but we expect to get actual paint sprayed in our master head this next week!

In other fun news, we had the chance to sit down with Steve and Robin of Acorn to Arabella. Steve is another boat builder, who spent 8 years building his wooden ketch in Massachusetts. It launched in 2023, and the pair are now on their way south for the winter.

We had a chance to look over their finished build and ask a few questions about the process!

We hope you enjoy!

Support MJ Sailing

At WeBoating.com, we profoundly acknowledge the unwavering dedication that MJ Sailing and other creators invests in crafting each and every video. Their passion for delivering exceptional content shines through every frame, and it's a labor of love that deserves your attention.

We invite you to watch their captivating videos and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.

We're also inviting you to explore any sponsorships and partnerships highlighted in the "Protecting Our Hardwood Trim with Clear Epoxy (MJ Sailing - Ep 350)" video description, or directly on YouTube. By considering their offerings or purchasing services and items, you not only support MJ Sailing but also the brands and collaborators they're associated with.

If you have any feedback, corrections, or additional information about MJ Sailing or their videos, please use the comment form below to share your thoughts with us.

Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!

MJ Sailing Lastest Videos

Showing 1-6 of 431 results
Preparing Our Catamaran for Paint—and Me for Captain’s School
MJ Sailing

Preparing Our Catamaran for Paint—and Me for Captain’s School

Thinking about earning your captain's license? Mariners Learning System: https://marinerslearningsystem.com/?rfsn=9072285.32c540&utm_source=refersion&utm_medium=affiliate&utm_campaign=9072285.32c540 Use code MJSAIL200PACK for $200 off the OUP...
The Bad News: We Have To Cut This Bulkhead Out (MJ Sailing – Episode 377)
MJ Sailing

The Bad News: We Have To Cut This Bulkhead Out (MJ Sailing – Episode 377)

Take a look at Fitnexa Somnipods 3: https://www.fitnexa.com/ We hope you're having a great second half of May!! It looks like we missed all of our April Showers here on Kent Island, and they were saved up for the past week. So...we didn't get as far as w...
Time to go from just a sailor to a Captain.
MJ Sailing

Time to go from just a sailor to a Captain.

Finally starting the process of getting my captain’s license ⚓📚 With a charter for us coming up in Greece this fall, I knew I couldn’t keep putting it off any longer — so I’ve officially started the Mariners Learning System courses. One thin...
Inside Our Homebuilt Catamaran (Full Walkthrough) – (MJ Sailing – Episode 376)
MJ Sailing

Inside Our Homebuilt Catamaran (Full Walkthrough) – (MJ Sailing – Episode 376)

This week we’re giving you a full walkthrough of our homebuilt catamaran to show just how much progress has happened lately. When you work on a project every single day, it’s hard to notice the small changes — but once we started walking through each...
We Almost Cooked Our Electrical System… So We Fixed It  (MJ Sailing – Episode 375)
MJ Sailing

We Almost Cooked Our Electrical System… So We Fixed It (MJ Sailing – Episode 375)

Save $30 on your Airlock purchase of $199 or more by using code MJSAILING or our link below. If you’ve ever dealt with that musty “boat smell,” this is one of the easiest ways to keep your air fresh and clean on board. https://www.airlockusa.com/?sca...
The Panel That Will Power Our Entire Catamaran (MJ Sailing – Episode 374)
MJ Sailing

The Panel That Will Power Our Entire Catamaran (MJ Sailing – Episode 374)

This one cabinet will eventually power our entire catamaran. Last episode we installed our two Victron MultiPlus II units, officially kicking off the installation of our electrical system. Now we’re moving on to the cabinet where all of our breakers wil...
WeBoating
Logo
Shopping cart