Getting Ready to Install Our FIRST EVER AC!! (MJ Sailing - Ep 365)
Can you believe we’re finally getting to the install part of our build?? Although, since most things won’t get permanently mounted until the end, I guess we could call this a fitting, haha.
This week we prepare for the install of our 9k BTU AC unit from Marine Breeze, into our master berth. We went with a slightly smaller unit here, because it is meant for when we close off this hull and just want to cool our berth at night when we sleep. There will be a 16k BTU getting installed in the other hull, which will have vents to the bridge deck.
Since we hadn’t originally planned for AC on this boat, we didn’t have a dedicated space to put it. Which means – glassing in new adjustments!! Luckily there is a space that is just about perfect for it, under our berth. We just need to make it a little deeper.
Matt sets to work measuring out the space, cutting the shelf, and glassing it back in 1/2″ lower. Once it’s in place and can handle the weight, we do a dry fit of the unit to make sure it fits.
Then, it’s on to custom duct work. We’ll each have our own vent that will allow us to control how warm or cool we want to be in bed (hopefully). This is going to be such a great addition to our cruising life, we can’t wait to get on the water and start using it!
We hope you enjoy!!
Much love,
Jessica, Matt & Georgie
Look at all the products from Marine Breeze:
https://marinebreeze.net/products/
If you have spring projects on your own boat and would like 5% off your purchase of Total Boat products, make sure to use our link here!
https://www.totalboat.com/MJSailing
Link to our boat: https://maxcruisemarine.com/
Link to SouthCo: https://southco.com/en_us_int/
Thank you SO MUCH to our Patrons. These amazing supporters help keep us on the boat, our camera equipment up to date, and the videos coming. Without our patrons, these videos would not be possible.
To join the Patreon ranks, please visit:
https://www.patreon.com/mjsailing
or
Buy us a beer through PayPal! https://www.paypal.me/MJSailing
or
Help contribute to the build by shopping our Amazon Wish List!
https://www.amazon.com/hz/wishlist/ls/2B2BOYEH9THAH/ref=nav_wishlist_lists_1
Delivery address:
Kentmorr Marina
910 Kentmorr Road
Stevensville, MD 21666
Thank you!, Matt & Jessica
Videos made by Jessica, featuring Matt and Georgie.
Music:
BRN RDY – Matt Large
Pandemonium (Tribute Version) – The Mondays
Camera equipment used:
– Google Pixel 9
– DJI Action 4
Previous Boats: 1983 Trisalu 37 – custom aluminum, built in Quebec (Elements of Life) Where we’ve been: 2.5 year refit in Indiantown,
Florida; Abacos, Bahamas; St. Barth’s; St. Maarten; Antigua; Saba; Azores; Ireland; Scotland; Norway; England 1989
Sabre 34 Targa (Serendipity)
Where We Sailed Her: U.S. – Bahamas – Jamaica – Cuba – Cayman Islands – Honduras – Guatemala – Belize – Mexico – Bermuda – Azores – Madeira – Canary Islands – Sint Maarten – BVI’s – USVI’s
Editing software: Adobe Premier Pro
Website: http://www.mjsailing.com
Facebook: / mattandjessicasailing
Instagram: / mattandjessicasailing
& / mj_wayfaring
Can you believe we're finally getting to the install part of our build?? Although, since most things won't get permanently mounted until the end, I guess we could call this a fitting, haha.
This week we prepare for the install of our 9k BTU AC unit from Marine Breeze, into our master berth. We went with a slightly smaller unit here, because it is meant for when we close off this hull and just want to cool our berth at night when we sleep. There will be a 16k BTU getting installed in the other hull, which will have vents to the bridge deck.
Since we hadn't originally planned for AC on this boat, we didn't have a dedicated space to put it. Which means - glassing in new adjustments!! Luckily there is a space that is just about perfect for it, under our berth. We just need to make it a little deeper.
Matt sets to work measuring out the space, cutting the shelf, and glassing it back in 1/2" lower. Once it's in place and can handle the weight, we do a dry fit of the unit to make sure it fits.
Then, it's on to custom duct work. We'll each have our own vent that will allow us to control how warm or cool we want to be in bed (hopefully). This is going to be such a great addition to our cruising life, we can't wait to get on the water and start using it!
We hope you enjoy!!
Much love,
Jessica, Matt & Georgie
Look at all the products from Marine Breeze:
https://marinebreeze.net/products/
If you have spring projects on your own boat and would like 5% off your purchase of Total Boat products, make sure to use our link here!
https://www.totalboat.com/MJSailing
Link to our boat: https://maxcruisemarine.com/
Link to SouthCo: https://southco.com/en_us_int/
Thank you SO MUCH to our Patrons. These amazing supporters help keep us on the boat, our camera equipment up to date, and the videos coming. Without our patrons, these videos would not be possible.
To join the Patreon ranks, please visit:
https://www.patreon.com/mjsailing
or
Buy us a beer through PayPal! https://www.paypal.me/MJSailing
or
Help contribute to the build by shopping our Amazon Wish List!
https://www.amazon.com/hz/wishlist/ls/2B2BOYEH9THAH/ref=nav_wishlist_lists_1
Delivery address:
Kentmorr Marina
910 Kentmorr Road
Stevensville, MD 21666
Thank you!, Matt & Jessica
Videos made by Jessica, featuring Matt and Georgie.
Music:
BRN RDY - Matt Large
Pandemonium (Tribute Version) - The Mondays
Camera equipment used:
- Google Pixel 9
- DJI Action 4
Previous Boats: 1983 Trisalu 37 - custom aluminum, built in Quebec (Elements of Life) Where we've been: 2.5 year refit in Indiantown,
Florida; Abacos, Bahamas; St. Barth's; St. Maarten; Antigua; Saba; Azores; Ireland; Scotland; Norway; England 1989
Sabre 34 Targa (Serendipity)
Where We Sailed Her: U.S. - Bahamas - Jamaica - Cuba - Cayman Islands - Honduras - Guatemala - Belize - Mexico - Bermuda - Azores - Madeira - Canary Islands - Sint Maarten - BVI's - USVI's
Editing software: Adobe Premier Pro
Website: http://www.mjsailing.com
Facebook: / mattandjessicasailing
Instagram: / mattandjessicasailing
& / mj_wayfaring
Getting Ready to Install Our FIRST EVER AC!! (MJ Sailing - Ep 365) Locations
- Kent Island (38.9373391,-76.3289941)
MJ Sailing
Sailing the world to see the world! We're a couple of high school sweethearts in our late 30's that have been on the move for 9 years; creating videos of the ups, the downs, our triumphs and our trials. After circumnavigating the North Atlantic in our last boat Serendipity, (1989 Sabre Targa 34), we took on a 2 year complete refit of our new boat Elements of Life - a custom aluminum 37' monohull. After sailing her to the Arctic, we sold her in 2020 to begin our newest project of building a 42 ft catamaran. Check out our website for more information, and support us by subscribing to our channel and liking our videos. Want to support the production of our videos? - Become part of our Patreon family and get videos before anyone else! - https://patreon.com/mjsailing - Make a donation through the PayPal link on our website - http://mjsailing.com - General inquires, please contact us at: [email protected]
Channel Information:
Social Media Links:
Note of Recognition for MJ Sailing
At WeBoating.com, we profoundly acknowledge the unwavering dedication that MJ Sailing and other creators invests in crafting each and every video. Their passion for delivering exceptional content shines through every frame, and it's a labor of love that deserves your attention.
We invite you to watch their captivating videos and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.
We're also inviting you to explore any sponsorships and partnerships highlighted in the video description of "Getting Ready to Install Our FIRST EVER AC!! (MJ Sailing - Ep 365)", or directly on YouTube. By considering their offerings or purchasing services and items, you not only support MJ Sailing but also the brands and collaborators they're associated with.
If you have any feedback, corrections, or additional information about MJ Sailing or their videos, please use the comment form below to share your thoughts with us.
Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!
MJ Sailing Lastest Videos
Showing 1-6 of 415 results
Getting Ready to Install Our FIRST EVER AC!! (MJ Sailing – Ep 365)
Can you believe we're finally getting to the install part of our build?? Although, since most things won't get permanently mounted until the end, I guess we could call this a fitting, haha. This week we prepare for the install of our 9k BTU AC unit from M...
Building Our Custom Helm Seat – Foam, Glass & Vacuum Bagging (MJ Sailing – Ep 364)
This week, we’re diving into a project that’s been quietly taking shape in the background: building our helm seat from scratch. While it might seem like a small piece of the boat, it plays a major role in both comfort and functionality—so we wanted ...
Diesel Demands Space, Electric Plays Nice (MJ Sailing – Ep 363)
We’re back in the engine bays this week, continuing to prep both sides of the catamaran for our twin propulsion systems—an electric motor in the starboard hull and a diesel-electric hybrid in the port hull. After receiving our full system from Hybrid ...
Making Room for 300 Pounds of Power (MJ Sailing – Ep 362)
We're prepping our catamaran engine beds for a brand-new hybrid propulsion system—an electric motor in one hull, and a 300+ pound diesel-electric hybrid in the other. In this episode, we tackle fiberglass reinforcements, fairing work, and reveal how we p...
Glassing on our Catamaran Bows – After I Clean Up a TOUGH MISTAKE (MJ Sailing – Ep 361)
Get a FREE pair of crew socks with your 100% waterproof Vessi shoes! https://crrnt.app/VESSI/y6920bP9 We’ve got both bows bonded onto our catamaran now, but before we can start glassing them in place, we run into a tough—and time-consuming—setback. ...
WE SCREWED UP Last Time. Here’s How We Fixed Our Custom Catamaran Build (MJ Sailing – Ep 360)
Go to https://nordvpn.com/mjsailing to get 4 extra months on a 2-year plan!! Just use code MJSAILING A huge thanks to this video's sponsor NordVPN. ALL PROCEEDS go directly to materials for custom build catamaran. This week we once again try bonding a b...
Something AWESOME is coming!
Be the FIRST to know⛵
Sign up for exclusive updates and be the first to hear when we go live!
Get sneak peeks, exciting announcement, and special content straight to your inbox!
We don’t spam! Read our privacy policy for more info.