Fresh replacement acrylic panels lie arranged across the deck of Voilier Coraille 2 as Fabien and Céanie tackle overdue deck hatch glazing repairs. Maintaining watertight seals on an offshore cruising boat demands routine attention, a reality documented by Coraille En Voyage while berthed in Port-de-Bouc. Moisture intrusion threatens onboard electronics and interior joinery, making hatch maintenance an urgent harbor project.
Refitting deck hatches requires sound preparation and proper bonding materials. Sourcing new acrylic panes split between Plexido and SPC Plastique, the crew selected MS3000 Pro multi-surface sanitary and marine sealant alongside polyurethane bedding compound. Following practical rigging guidance, the primary focus centered on creating an impervious barrier directly along the structural contact flange.
Proper installation technique requires applying a thick, uninterrupted bead underneath the acrylic perimeter before bedding each panel down. As the crew noted during installation, “It’s really underneath, my friend, that’s what creates the seal.” Once each pane settled into position, the surrounding perimeter bead received smoothing with soapy water. To prevent tearing the fresh perimeter joint, the crew immediately pulled away protective masking tape while the compound remained wet, rather than allowing the sealant to cure against the tape.
Achieving an immaculate finish on the exterior deck surface proved straightforward, but descending below deck revealed an entirely different scene. Generous sealant application forced excess black compound through the bedding seams, creating heavy smears along the interior cabin frame. Inspecting the messy drips across the cabin headliner prompted dismay: “Honey, but this is, it’s just catastrophic.”
The sight sparked exasperated laughter aboard, with Céanie joking, “I’m selling everything, I’m quitting.” Despite the interior mess, structural adhesion remained intact. The planned recovery avoided smearing wet sealant across finished interior surfaces. Instead, the crew chose to let the squeezed polymer cure fully before trimming away excess material with a sharp utility cutter to restore clean interior lines.
Cruising boat projects rarely unfold without unexpected disruptions from local weather. Heavy rain swept across the harbor, leaving the tender tied astern flooded with cold standing water. When crew friend Maxou arrived at the dock, boarding required climbing directly down into the swamped dinghy to inspect the tender and clear water using an onboard pump.
Despite his hesitation around cold harbor water, Maxou boarded successfully without incident. Friends Elise, Françoise, and Lionel soon joined aboard Coraille 2, turning an afternoon of messy harbor maintenance into a lively gathering filled with lighthearted banter, camaraderie, and mutual support between cruising companions.
Nightfall brought a return to interior boatbuilding tasks inside the forward cabin. Earlier refit attempts had incorporated a wooden desk setup, but the heavy structure proved cumbersome to dismantle whenever overnight guests needed berths. As a result, the cabin workspace had fallen out of active use because converting the cabin back into sleeping quarters caused constant frustration.
To solve this spatial dilemma, Fabien designed a multifunctional cabin layout utilizing an adjustable sit-stand desk mechanism. When elevated, the desk provides a dedicated workspace for music production and ship duties; lowered flat, the surface sits flush within the berth framework to support a full bunk mattress. Working alone in the cabin at 2 a.m. to apply a required second finish layer, Fabien explained the discipline behind the odd schedule: “I had set an alarm for 2 a.m. because on the can it says apply your varnish 2 hours later.” Adhering to the manufacturer recoat window ensured proper bond strength, transforming the cabin into a functional convertible space.
Masking tape must be removed while the marine sealant remains wet. If left until after the compound cures, peeling the tape risks tearing the fresh joint and compromising the waterproof perimeter seal.
The crew used MS3000 Pro sealant supplied by Plexido, a waterproof multi-surface sanitary and marine sealant designed to withstand seawater exposure on boat decks.
The varnish instructions called for a second coat exactly two hours after the first. To avoid finish problems experienced on previous woodworking projects, Fabien woke at 2 a.m. to recoat within the designated window.
Instead of a heavy fixed wooden desk that was difficult to dismantle, the cabin utilizes an adjustable sit-stand desk frame that elevates for office use and lowers flush to support a mattress for sleeping berths.
At WeBoating.com, we profoundly acknowledge the unwavering dedication that Coraille En Voyage invests in crafting each and every video or voyage. Their passion for delivering exceptional ocean content shines through every frame, and it's a labor of love that deserves your attention.
We invite you to watch their captivating videos here and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.
We're also inviting you to explore the gear, sponsorships, and boat partnerships highlighted in the "AU SECOURS, le bateau prend l’eau ! Heureusement, les copains arrivent" video description, or directly on YouTube. By engaging with these offerings or purchasing services and items, you directly support Coraille En Voyage, their collaborators, and the brands they're associated with.
To ensure you never miss an offshore update, consider visiting their official YouTube Channel to subscribe, like, and join their community directly.
If you have any feedback, corrections, or additional information about Coraille En Voyage or their videos, please use the comment form below to share your thoughts with us.
Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!
Coucou les copains ! ⛵😊
⚓ **Notre formation pour apprendre à naviguer** : https://www.voiliercoraille.com
🛠️ **Le site de Gilles et Sud Rigging**, pour tout savoir sur le gréement : https://www.sud-rigging.com/
Un grand merci à tous pour votre soutien et bonne navigation ! 💙
Montage : Fabien,Céanie et Framboise
Musiques:Fabien Lafiandra www.youtube.com/fabguitar38
Merci à Scott Buckley pour ses fantastiques musiques . On ne les utilise pas sur toutes nos vidéos mais si vous aimez la belle musique n'hésitez pas à aller écouter :
www.scottbuckley.com.au'With These Hands' by Scott Buckley - released under CC-BY 4.0. www.scottbuckley.com.au-----
----------Want to learn to sail? You will find the online training to learn navigation and life on board as well as all the guides on our website and take advantage:https://www.voiliercoraille.com/See you soon
Explore the most recent voyages. Subscribe to the channel to never miss an update!