More beautiful Rosewood laminating 🌳😁 Ep.146 Building my steel sailing yacht
MY CHANNEL IS STRUGGLING!
PLEASE CONSIDER SUPPORTING MY WORK on either https://www.patreon.com/symistress or https://www.paypal.me/symistress
I triple check the dimensions of the gas/propane locker panels before coating all edges with X3 coats of epoxy; I explain that because I usually prefer to have a decent amount of things to epoxy coat each time, I make up X3 more panels that also get coated at the same time – the heads sink cabinet top, the navigation desk hinged leaf and a small hinged panel below the oven; I get a special visit from a U.S. good follower and Patron; and I do more beautiful Rosewood laminating this time for the heads sink top!
Mistress is designed by one of the highly respected Dutch naval arcitects E.G. Van de Stadt, a Caribbean design, length 40ft/12m, beam 13ft/3.9m, draft 5ft/1.5m. Her hull and decks are built in mild steel and I have built her on my own and am also fitting her out on my own. I have not built any type of boat before Mistress.
There were many reasons why, but the work stopped,…
However, the work has re-started, thankfully, and I am on an exciting journey to finish Mistress and then go on my sailing adventures,…
I hope that you can join along with me!
https://www.youtube.com/user/bmwfreedom
https://www.symistress.com
https://www.patreon.com/symistress
https://www.paypal.me/symistress
https://www.facebook.com/bruce.wilson.1481
Music thanks
www.bensound.com Creative Minds:
Epidemic sound:
Way Out of New Orleans-The New Fools
Dog on a Rope-Devil and the Perfects
Just Crusin’-Bonsaye
Building SY Mistress
Welcome to Building SY Mistress and her journeys! I have built a Van De Stadt, 40ft steel sailing yacht and am in the process of fitting her out. I have never built a boat before! I have built her solo, on my own. I found that there are very few youtube channels showing people amateur building in particular steel sailing boats and also particularly showing the nitty gritty work stuff, like the hours/days/weeks/months of the necessary and yes monotonous work that goes in to building a boat. NOTE - I do not intend on boring anybody viewing by showing most of the repetitive stuff! Heavy editing will be in place! So perhaps this channel could be helpful for anybody who may be wanting to see some more details in the building process and what/how much work is involved. Once Mistress is finished I will then move aboard and set sail,....... to commence my life-long dreams and goals of full-time sailing adventures,..... I really hope that you can join me along for the journey,...
Channel Information:
Social Media Links:
Note of Recognition for Building SY Mistress
At WeBoating.com, we profoundly acknowledge the unwavering dedication that Building SY Mistress and other creators invests in crafting each and every video. Their passion for delivering exceptional content shines through every frame, and it's a labor of love that deserves your attention.
We invite you to watch their captivating videos and actively engage with their content, including their social media links above. Liking, commenting, and sharing their work goes a long way in fueling their creative fire.
We're also inviting you to explore any sponsorships and partnerships highlighted in the video description of "More beautiful Rosewood laminating 🌳😁 Ep.146 Building my steel sailing yacht", or directly on YouTube. By considering their offerings or purchasing services and items, you not only support Building SY Mistress but also the brands and collaborators they're associated with.
If you have any feedback, corrections, or additional information about Building SY Mistress or their videos, please use the comment form below to share your thoughts with us.
Thank you for being a part of our community and supporting the creators we cherish. Your time and support truly matter!
Building SY Mistress Lastest Videos
BRUTAL Below Waterline RE-Paint WORK! (pt.1) Ep.188 Building my steel sailing yacht
HEAPS of WORK going ON! I get the Deck Stripe painting done, my son Samuel joins me with his INCREDIBLY hard working and willing help with all sorts of things needing to be done as well as teaching me for my first ever Drone flight and we get stuck in to m...
The RE-PAINT WORK STARTS! Ep.187 Building my steel sailing yacht
Times are a' changing with Mistress! In this episode - my new/first DRONE finally gets up for some footage; YES, Mistress is in the water; I get back to full episode editing and with making a plan regarding episode footage release AND the RE-PAINT WORK STA...
Real time Update Oct.’24 – Building my steel sailing yacht
Since the beginning of September until the end of October, those 2 past months were seriously brutal on me, both physically and mentally, with A CRAZY, RIDICULOUS amount of work that HAD to be achieved, in order to first launch Mistress and then get her sa...
FIRST MEDIA INTERVIEW (+short update) Ep.186 Building my steel sailing yacht
Short Sept. Episode,... Well, the gusty winds as of yesterday and then the rains with the gusts started early this morning, foiling my painting plans and so I've put together a short 'explainer' video AND with a short interview that my local Channel 7 medi...
The LINING WORK resumes 😍 (pt.1) Ep.185 Building my steel sailing yacht
ABOUT TIME, RIGHT?! Although from afar you may at times have had puzzling thoughts about my, "methods in my madness" approaches and planning to the which, when and why with the fit-out boatwork, as explained several times, I KNEW that there were many other...
GAME-CHANGER Coachroof Rails (pt.2) Ep.184 Building my steel sailing yacht
This is part 2 of getting ALL of the Beautiful N.G. Rosewood coahroof rails dry and then permanently FITTED! What I would call some fine joinery work, that I am proud of and think looks really nice, as well of course as being very functional and good safet...
GAME CHANGER EPISODE!😲Ep.183 Building my steel sailing yacht
GAME CHANGER EPISODE! Now with SO MANY smaller jobs behind me, I FINALLY get back to working on fitting the cabin lining, but there was one VERY IMPORTANT part of this puzzle that I needed to solve first, in order to be able to continue with fitting the li...
Some smaller BUT IMPORTANT jobs 👨🔧 Ep.182 Building my steel sailing yacht
Learn how to tackle smaller yet important boat jobs when building your steel sailing yacht, like securing throttle cables with custom-made brackets. Explore essential steps in yacht construction, from anchoring batteries to mounting control cables.
ELECTRONICS INSTALL START Ep.181 Building my steel sailing yacht
Episode Title: ELECTRONICS INSTALL START Ep.181 Building my steel sailing yacht. YouTube Channel: Building SY Mistress. Subtitles: righto in this episode it's all about making a start with the electronics...
Gas/LPG/Propane BOAT INSTALL Ep.180 Building my steel sailing yacht
In this episode, we delve into the process of installing an LPG or propane gas fuel supply for the stove oven on our steel sailing yacht, SY Mistress. Join us as we face difficulties in finding a suitable gas fitter and share the journey of persistence tha...
CUSTOM BOAT PLUMBING INSTALL Ep.179 Building my steel sailing yacht
In this video episode, the expert plumber continues working on SY Mistress, showcasing the installation of custom boat plumbing for the bathroom and a portable fridge freezer. The catch-up episode details the raw water vs fresh water usage in toilets, the ...
Mistress’ FIRST SURVEY!😲 Ep.178 Building my steel sailing yacht
In this engaging episode, we sit down with Simon from Marine Surveys Australia to discuss the critical aspect of obtaining a survey for Mistress, our steel sailing yacht in progress. Explore the insights, stories, and technical aspects behind creating a fo...
PROTECTING the ANCHOR LOCKER Ep.177 Building my steel sailing yacht
In this episode of Building SY Mistress, follow the process of fitting a protective rubber solution for the anchor locker and finishing off the V birth cabinet doors.
INCREDIBLE 🏆 Mistress’ NEW RIG 💪 Ep 176 Building my steel sailing yacht
In this video, we go back to revisit the design and build of the steel sailboat 'Mistress's rig', discussing its details and significance with renowned boat builder Cookie from SNH Spars. Discover valuable tips about constructing a solid, high-quality yach...
FINISHING the DODGER build 💪 (pt.3) Ep.175 Building my steel sailing yacht
In this episode, discover the detailed process of completing the Dodger on Building SY Mistress' steel sailing yacht. Witness the dedication required for boat work, achieving a rewarding result after putting in extensive effort.
HOW TO build a STEEL HARD DODGER (pt.2) Ep.174 Building my steel sailing yacht
Part 2 of building Mistress' hard dodger and YES, as with everything with boats, getting things to this stage took more hard work than anticipated and a lot of sweat, particularly in the very HOT summer had on the Sunny Coast last-this year! At this stage ...
WHAT HAPPENED TO BUILDING SY MISTRESS? 😲 Ep.173 Building my steel sailing yacht
About time that I online surfaced and came back to explain a few things! MUCH GOING ON! Ohh, and for those who had wondered and those who'd asked - No, I do not quit! 😁 ⛵ And for those who are not aware - times have changed A LOT, plus small channels...
HNY 2024 🎉🍾 from Building SY Mistress!
HAPPY NEW YEAR 2024 EVERYBODY! This IS the year that Mistress is finally launched and actually is planned for this first month of this year! Wishing all of you a happy and great New Year! Mistress is designed by one of the highly respected Dutch naval ar...
LOTS GOING ON! Building my steel sailing yacht
UPDATE from the 15th December. Mistress is designed by one of the highly respected Dutch naval architects E.G. Van de Stadt, a Caribbean design, length 40ft/12m, beam 13ft/3.9m, draft 5ft/1.5m. Her hull and decks are built in mild steel and I have built h...
TRIGGER HAS BEEN PULLED! 😲 Ep.172 Building my steel sailing yacht
Well people, FINALLY, it arrived! The MOVE OUT of Mistress' boat yard date AND THE LAUNCH DATE!! THIS IS MASSIVE NEWS!! I have been wondering for YEARS, just WHEN that "POINTY END" time was going to come, which would be the signal and trigger for things to...
MISTRESS HAS AN OUTSIDE! 🤩 Ep.171 Building my steel sailing yacht
I FINALLY SHOW YOU THE OUTSIDE OF MISTRESS, as she is now! Also - I fit the door stops for the main lower V berth cabinets; I get ANOTHER/THE FINAL X10 small panels made up, which are also for the V berth cabinets and are now ALL THAT I WILL BE MAKING UP, ...
I CRASHED/HIT THE PROVERBIAL WALL 🥵 Ep.170 Building my steel sailing yacht
I CRASHED/HIT THE PROVERBAIL WALL AND REALLY NEEDED A BREAK! I get the main panels for the V berth Port and Starboard cabinets epoxy coated and installed as well as make up some other panels by joining up smaller pieces of what's left of my marine plywood ...
ULTIMATE/LAST BATCH of Panels! 😍 Ep.169 Building my steel sailing yacht
THIS episode is a VERY SIGNIFICANT MILESTONE! 💪 It is all about designing and making up the ULTIMATE/LAST batch of significant furniture fit-out panels, which are for the Port and Starb'd CABINETS in the V berth (Note-not 'lockers' anymore 😁) Mistre...
LOOK at THAT for fridge-freezer SPACE! 🧊😲 (pt.2) Ep 168 Building my steel sailing yacht
IT'S A WRAP! Running two Electrical cables; securing multi Anti-Chafe; installing more Insulation and the main panels for the Fridge-Freezer space, Fancy head cabinet Shelves as well as the final Navigation desk panels - meaning that the 'Penultimate batch...
Something AWESOME is coming!
Be the FIRST to know⛵
Sign up for exclusive updates and be the first to hear when we go live!
Get sneak peeks, exciting announcement, and special content straight to your inbox!
We don’t spam! Read our privacy policy for more info.