YouTube Videos
Rebuilding a wrecked wooden boat: WE ARE FINALLY OFF-GRID! — Sailing Yabá 183
https://www.sailingyaba.com/lithium Bringing Yabá from wreck to dreamy! Episode 183 In this episode of our boat restoration, we paint our worm shoe, add thru-hulls, fix Loïc's motorbike, but most important of all: we connect our LiFePo4 Battle Born Batte...
Boat restoration diaries: what it really looks like to face the high and lows — Sailing Yabá 181
https://shopsailingyaba.com Bringing Yabá from wreck to dreamy! Episode 181 In this episode of our boat restoration, we install our heads thru-hulls and finish the installation of our most forward bilge pump while fighting an on-an-off rain. 👉 SUBSCR...
We drilled the wrong hole! Boat building, beers, barbecue and friends — Sailing Yabá 180
https://shopsailingyaba.com Bringing Yabá from wreck to dreamy! Episode 180 In this episode of our boat restoration, we drill the last holes through our hull. We almost managed to finish that task without a single mistake but... sh* happens! Besides that,...
Prepping our WOODEN BOAT for LAUNCH! Transducer, pumps and through hulls — Sailing Yabá 179
https://shopsailingyaba.com Bringing Yabá from wreck to dreamy! Episode 179 In this episode of our boat restoration, we install our transducer, make more thru-hulls and update our bilge pumps switches. 👉 SUBSCRIBE to not miss out on the new episodes: ...
This rescued wooden boat won’t sink anymore: installing big bilge pumps — Sailing Yabá 178
Bringing Yabá from wreck to dreamy! Episode 178 In this episode of our boat restoration, we finally start installing our first bilge pumps! Not just adding them into place, but actually connecting them electrically to our control panel. Besides, we also w...
Drilling important holes in a 2 inches wooden boat’s hull — Sailing Yabá 177
Bringing Yabá from wreck to dreamy! Episode 177 In this episode of our boat restoration, we drill our toilet's thru-hulls, caulk the last plank together with the keel, start working on the panel of our bilge-pumps switches and get the visit of a very adve...
Wooden sailboat restoration: we would have sunk until now — Sailing Yabá 176
Bringing Yabá from wreck to dreamy! Episode 176 In this episode of our boat restoration, we start caulking the last plank of the hull as well as the deck, add epoxy to the sacrificial keel and work on our chainplates. Enjoy! 👉 SUBSCRIBE to not miss o...
12V is not enough! Converting our wooden sailboat to 24V (DIY restoration) — Sailing Yabá 175
https://shopsailingyaba.com Bringing Yabá from wreck to dreamy! Episode 175 In this episode of our boat restoration, we play electrician once again and convert our control panel from 12V to 24V. Then we install it in place and start making more connectio...
Wooden boat refit: We have engine cooling and added some shade to the deck — Sailing Yabá 174
Bringing Yabá from wreck to dreamy! Episode 174 In this episode of our boat restoration, we add the salt water intake for the cooling system of our engine and install our bimini. 👉 SUBSCRIBE to not miss out on the new episodes: https://bit.ly/3dI3hBn...
Rebuilding a wooden sailboat: the first underwater thru-hull — Sailing Yabá 173
Bringing Yabá from wreck to dreamy! Episode 173 In this episode of our boat restoration, we share our DAY 5 towards launch! We finish installing the metal plate around the prop area and even paint it for protection and then we also make OUR FIRST UNDERWAT...
Wooden sailboat refit: That’s not what a through hull is for! — Sailing Yabá 172
Bringing Yabá from wreck to dreamy! Episode 172 In this episode of our boat restoration (Day 4 of our launch countdown) we continue building a metal plate around our prop area and also finish installing the first thru-hull (above the waterline) and to tes...