Reset Password

click to enable zoom
Loading Maps
We didn't find any results
open map

USD 0 to USD 10,000

YouTube Videos

ROV Camera Tilt Unit
SV Seeker
ROV Camera Tilt Unit
Making a compact video camera tilt mount and acrylic dome for our ROV that will go down to 3000 feet. ...and... Name the Shop Chicken Contest.
ROV Sonar – Part 1 – Housing
SV Seeker
ROV Sonar – Part 1 – Housing
Lowrance makes a great high end fish finders and low end sidescan and now scanning sonars in their StructureScan and SpotlightScan products. Both can be connected to a SonarHub which converts the signal to Ethernet and then routed to two displays on your ...
ROV Control – Part 1
SV Seeker
ROV Control – Part 1
We asked Drew Morgan, our friend and freelance engineer extraordinaire to work on the ROV's compass and pitch control system and we got much more than we asked for. I any of you have a idea for an invention or want a prototype built we highly recommend t...
ROV Thrusters – Part 3 – Testing Props
SV Seeker
ROV Thrusters – Part 3 – Testing Props
I hoped for better performance from our CNC cut propeller. Turns out it sucks. But we did lean a lot about the black magic of propeller design. There are most definitely some drastic exceptions to what the book says. Resources: Ducted Blade and Collet...
ROV Hull Components – Part 1
SV Seeker
ROV Hull Components – Part 1
Super Dave gave us some lessons on the metal lathe and helped out a couple of weekends and between the 3 of us we have almost all of the hull components ready. And even our bad part passed the 2000 psi pressure test.
ROV Thrusters – Part 2 – Making Propellers
SV Seeker
ROV Thrusters – Part 2 – Making Propellers
A CNC Router is a bit lightweight for aluminum but Acetal aka Delrin turns out to be the perfect match once we got the backlash and calibration adjusted. Our friend Drew printed a couple of propellers using ABS plastic on his 3D printer.