YouTube Videos

Rebuilding a historic sailing yacht - Bilge Stringers / Oak problems! (EP72) Support; http://www.sampsonboat.co.uk/support Become a Patron; http://www.patreon.com/sampsonboatco ---- EPISODE 72. In this episode we face a major dilemma - having found tha...

After over a month of Quarantine on our boat due to Covid-19, we were finally able to go ashore and tour the Annaberg Sugar Plantation. The Plantation is part of the Virgin Islands National Park, located on St. John, USVI. Located on a bluff overlooking ...

Rebuilding a historic sailing yacht - Milling White Oak in New England (EP63) Support; http://www.sampsonboat.co.uk/support Become a Patron; http://www.patreon.com/sampsonboatco ----- EPISODE 63. In this episode Cecca and I travel to New York, where we ...

Milling our planking stock out of our donated cedar and working on figuring out our bronze floor timbers! Buckle up because there is a lot of information here. A lot goes into this project behind the scenes that we don't talk about. Most of that is the m...

Want to make power from nothing? Well, that's impossible, but you can build your own alternator that to make power from wind, moving water or most anything else that spins. This is a technical video that shows how electric power can be made with a DIY al...

Almost done with the davits, getting along cutting patterns for casting our bow rollers. Making plans for adding a 3D printer to our Tormach CNC mill, and still thinking about where to put wheels under the boat. Many thanks to Herb for his help! FaceBoo...

Join us for Betsy's coffee cake and meet Herb who is launching a fascinating career in gymnastics for paraplegics. And we are looking for tool for our CNC Mill. R8 spindle, hold down, vice and cutting tool donations are welcomed. FaceBook: https://www....

Steve takes us through the milling process from start to finish. Please visit our website for full project details: http://www.acorntoarabella.com If you would like to help support us, please visit http://www.patreon.com/acorntoarabella El video doblado...

It's asking a lot of our CNC plasma/router table but with help from Super Dave we turned it into a successful CNC lathe so we could mill the grooves in our home make propeller blades that will fit our Hundested Controllable Pitch Propeller system.