YouTube Videos

The biggest job of them all for the boat work has been completed. Grinding and sanding for days is over, now time to paint the bottom of the boat! #sailing #sailboat #catamaran #boatyard #boatwork

Hi all! Now that we've discovered the extent of Hurricane Ian damage to our 50-foot sailboat, it's time to start making repairs. The biggest and most important repair is fixing the crack in our fiberglass hull. Kirstin jumps in and takes the lead in gr...

After cutting out our second hull plate, we get it fitted and we finally finish the welding on both plates, allowing us to move onto the next big project! Patreon: https://www.patreon.com/thewaywardlife Website: http://www.the-wayward-life.com Instagram:...

In this weeks episode of Barefoot Sail and Dive we crack on with the fibreglass repairs. We do end up cutting two more LARGE HOLES in the boat. But progress is happening and we are coming along. Make sure you watch the full episode lots of interesting st...

In this episode of Barefoot Sail and Dive Davy starts some of the small repairs on the starboard side. Some of the damages are very small cracks in the gelcoat. After some investigation though the small crack leads to huge problem! Watch to see what we fi...

⇩ Watch the full movie ⇩ Download the full movie length documentary UNTIE THE LINES at http://www.UntieTheLines.com ⇩ Want to support these videos ⇩ ► PATREON http://www.patreon.com/WhiteSpotPirates ► PAY PAL https://www.paypal.me/whitespotpir...

In this episode of Barefoot Sail and Dive we work on our rudders a little bit more. Can we recover them?? There is way more hidden damage inside them than we thought! We also show you a little bit of our typical day here in Luperon. There are many events ...

(🇫🇷 Juste en dessous) At the boatyard we were, at the boatyard we are still. Last week (to see in this episode: https://youtu.be/9SNgUGdx1b4), we started to scratch the hull to bare it and we removed the rudder wick which was well stuck. This week...

We have postponed our closet and will start on all the small issues that we have onboard. We have used sikaflex 295 Uv, that should tolerate the uv from the sun.

We give you an update on our CORONA situation and then we will continue with the closet. Wr have made the teat around the closet and will start on the doors, but... I fail :(

A big failure on the have beeb seen by one of our subscribers and we will repair that. We have also worked on our closet and get all our boat-stuff down in the boat.

We have booked the crane and been on the hard. The sound that we have from the "engine-area", could be from our new propeller and therefore, we decided to go on there hard. We grind the edges on the prop... Problem solved :)