Reset Password

USD 0 to USD 10,000

Woodworking YouTube Videos

Showing 586-600 of 662 results
Acorn to Arabella – Journey of a Wooden Boat – Episode 67: Q and A Before Planking
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 67: Q and A Before Planking
We are launching into planking soon but before we get into all that, we really wanted to do a little house cleaning video. We get so many questions about the project and it's not always easy to address them all in the subsequent videos. So, right now see...
Salt & Tar: Episode 53-Building Our Main Mast
Salt & Tar
Salt & Tar: Episode 53-Building Our Main Mast
Last episode we laminated up a new main mast. We continue shaping the mast to fit the mast step and getting it closer to round. Long but great days working outside in the Napa Boatyard! Thanks for watching everyone! Many thanks and much love, Ruthie http...
Acorn to Arabella – Journey of a Wooden Boat – Episode 66: Installing Pocket Keel Bolts
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 66: Installing Pocket Keel Bolts
Now that we have all the floors fabricated and the majority installed, there are 4 more very important ones to focus on. The ones that tie the ballast keel to the keel timber. These four floors in the middle of the vessel will hold the bolts that capture...
Acorn to Arabella – Journey of a Wooden Boat – Episode 65: Installing the Bronze Floors
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 65: Installing the Bronze Floors
The prep is over with and it is finally time to install the bronze floors! We have invested so much time, energy and money in these and it is such a gratifying feeling to finally see them put in place. In the end, the installation went very smoothly and ...
Salt & Tar: Episode 52-From Bulwarks to Mast
Salt & Tar
Salt & Tar: Episode 52-From Bulwarks to Mast
We've finished up with the port side bulwark planking and now to turn our attention to Rediviva's masts... Unfortunately with all the distraction of building the boat our masts we're not taken care of. Our mizzen developed a kink at one end so now our orig...
Acorn to Arabella – Journey of a Wooden Boat – Episode 64: Setup for Bronze Floor Installation
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 64: Setup for Bronze Floor Installation
The bronze floor timbers have been a lot of work but it is all paying off. We spend some time prepping everything so that we can finally get to installing these beauties in their places for good! Each faying surface will need treatment before we can place...
Acorn to Arabella – Journey of a Wooden Boat – Episode 63: Welding the Bronze Floors
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 63: Welding the Bronze Floors
The end of the current metal work which comes with fabricating the bronze floors we are installing in Arabella is finally nearing its end. These structural members tie the frames to the centerline and whether they be wood or metal, are one of the most imp...
Salt & Tar: Episode 51-From Plank to Soup
Salt & Tar
Salt & Tar: Episode 51-From Plank to Soup
This episode takes you through some typical work days; wake up, coffee, work on the boat, maybe a supply run, work on the boat, try not to forget to eat lunch, then clean up, sleep, dream about working on the boat. This is boat life. It'll be nice when we ...
Acorn to Arabella – Journey of a Wooden Boat – Episode 62: Fitting the Engine Beds
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 62: Fitting the Engine Beds
We pushed really hard to get the bronze floors finished up so they could be sitting in their places during the open house. In this episode we show how we got the floors ready to start fabricating the supports for the engine beds. Since everything fits in...
Cockpit Makeover | Sailing Wisdom [S3 Ep39]
Rigging Doctor
Cockpit Makeover | Sailing Wisdom [S3 Ep39]
Flash through the galley completion and join Herby for the construction of our new deck rack! Maddie cleans like crazy and takes us on a walk through Angra. Both of us tackle the monster project of cleaning, sanding, and painting the cockpit in one afterno...
Acorn to Arabella – Journey of a Wooden Boat – Episode 61: Tacking Floors and Steaming Frames
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 61: Tacking Floors and Steaming Frames
We're moving right along with our silicon bronze floor timbers. We tacked most of the floor pieces together in preparation for welding them in batches. Before we can finish making the rest of the floor timbers though, we need to replace the frames that w...
Salt & Tar: Episode 50 – From Prep to Plank
Salt & Tar
Salt & Tar: Episode 50 – From Prep to Plank
When all the prep was done the reward was hanging planks! The preparations took weeks but finally the visual satisfaction of our first two runs of planking were on. We bought green lumber which means some movement is expected but we were surprised how quic...
Acorn to Arabella – Journey of a Wooden Boat – Episode 60: Forward and Midship Floors
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 60: Forward and Midship Floors
As we continue moving forward on the forward and midship bronze floor timbers, we are kindly interrupted by a friend of ours who plays us a cover of 'Boats to build' by Guy Clark. The bronze floors are a tedious amount of work. Bending the compound curve...
Acorn to Arabella – Journey of a Wooden Boat – Episode 59: Clean up and Bronze Floors
Acorn To Arabella
Acorn to Arabella – Journey of a Wooden Boat – Episode 59: Clean up and Bronze Floors
We've all been looking forward to getting to work on the bronze floors but before we can do so, we had a bit more cleaning up to do in order to finish up with Victoria. As we're looking to save as much as possible, we had to strip all the planking of its f...
Salt & Tar: Episode 49 – Breath of Fresh Air
Salt & Tar
Salt & Tar: Episode 49 – Breath of Fresh Air
Determined to finish Rediviva and get her sailing we've decided to focus on the projects we have the motivation for. Tired of being trapped down below working on the engine and interior it was time to step outside. Now that the sun is making more of a stea...