Watch Sailing & Boating Adventures Around the World tagged “Trudesign”
Explore sailing, boating, and water sports through our curated video archive. From epic sea voyages to serene diving escapes, discover unforgettable adventures from top YouTube creators. Start your journey. Dream big. Sail far.
Showing 1-24 of 65 results
⛵️SO DAMAGED! THRU HULL REPAIR DIY | Hallberg Rassy 352 | Tru Design
LUCKY US - We found more damage to Joco! In this episode we complete the 4 thru hull replacements but find additional problems along the way - obviously. Spider cracks, blisters and what else....No matter, the JOCO's are on it and quickly so that we can ge...
⛵️HOW TO STOP YOUR BOAT FROM SINKING | UNEXPECTED Thru Hull Replacement – TruDesign
Here we go again with MORE HOLES in the boat! We're never going back in the water.... We discover some faulty Thru Hulls at the very last minute before launch and get busy QUICK to replace them. Only problem is we've never done it before Thank you for all...
Broken Ball Valves | Sailing with Six | Ep 23
Time to fix the hole in our boat! We get hauled out in Noumea and spend 48 hours on the hardstand to replace two ball valves and throw another coat of antifoul on. It’s a whirlwind but worth it to replace the ball valves which both had snapped stems wi...
How to Install Thru Hull Fittings – TruDesign | Sailing Sunday
We replaced every Thru Hull and Seacock on Sunday with TruDesign. This is a simple step-by-step guide on how we did it.
S3 #26 How to fix leaking hatch:skylight DIY boatwork
We have postponed our closet and will start on all the small issues that we have onboard. We have used sikaflex 295 Uv, that should tolerate the uv from the sun.
S3 #25 CORONA update, the closet and the FAILURE !!
We give you an update on our CORONA situation and then we will continue with the closet. Wr have made the teat around the closet and will start on the doors, but... I fail :(
S3 #24 FAILURE on the shaft !! The new closet and prepare for the first sail DIY boatwork
A big failure on the have beeb seen by one of our subscribers and we will repair that. We have also worked on our closet and get all our boat-stuff down in the boat.
S3 #23 How to remove unwanted sound from propeller -DIY boatwork
We have booked the crane and been on the hard. The sound that we have from the "engine-area", could be from our new propeller and therefore, we decided to go on there hard. We grind the edges on the prop... Problem solved :)
S3 #20 DIY boatwork REFLOATING… And issues.
We have finaly water under our keel and can test engine and bow thruster, but there is some small issues that we need to take care of.
S3 #19 DIY boatworkBow thruster and antifouling
The antifouling is applied and the bow thruster will ready with all the electrical... We want to refloat.!!!
S3 #18 DIY boatwork batteries to the bow thruster
We have bought batteries to the bow thruster and will start the installation. The outside hull is washed and we will prepare the antifouling-application. The new charger: https://sterling-power.com/collections/battery-to-battery-chargers/products/2015-bat...
S3 #11 DIY boatwork fiberglass and cold epoxy
The temperature and weather is getting better and we can laying up fiberglass outside and then continue with our new bow thruster...
S3 #10 DIY boatwork fiberglass and a stupid mistake
We have started to close some of the holes in the bottom, but we get an challenge and could not handle the moisture on the hull due to the low outside temperature.
S3 #8 DIY boatwork shaft and bow thruster (ENG subtitles)
There is applied filler around the thruster tunnel and the shaft is placed.
s3 #7 DIY boatwork The new bow thruster (ENG subtitles)
The parts to the engine is not arrive, so we will start mounting the bow thruster.
Sæson 3 #6 Motoren er på plads
Motoren er kommet ind på plads og vi er startet stille op på bovpropel.
Sæson 3 #5 Hul til stævnrør
Der skåret hul til stævnrøret og vi er startet på at male motorrummet.
Sæson 3 #4 Det færdige fundament
Vores fundament til den nye motor er færdig :)
sæson 3 #3 støv og lukning af huller
Der er blevet skåret lidt mere af fundamentet og så er der blevet slebet, så det er klar til glasfiber.
sæson 3 #2 fundamentet
De første streger på fundamentet er sat og er begyndt at blive skåret til. Det begynder at give mening...
Sæson 3 #1 Den nye motor
Den nye motor er kommet og skal monteres, der venter dog lige lidt arbejde før vi er klar... STOR TAK TIL: https://shipcare.dk De har været en god hjælp og støtte if med ombygning... TAK.!!!
sæson 2 #8 montering af davider
Vi er omsider blevet færdig med at montere vores davider og så skal solcellerne sluttes til. video med forskellen på serie og parallel forbundet solceller: https://www.youtube.com/watch?v=1qD3mN8VotQ&t=410s
Sæson 2 #7 Rikke´s skab
Rikke knokler løs i FIE... Klargøring til davider og hendes skabe får kærlighed i denne video.
Sæsom 2 #6 Sygdom og Rikkes projekt
En kort beskrivelse af vores nuværende udfordringer og så lige lidt "Rikke´s projekt".
Something AWESOME is coming!
Be the FIRST to know⛵
Sign up for exclusive updates and be the first to hear when we go live!
Get sneak peeks, exciting announcement, and special content straight to your inbox!
We don’t spam! Read our privacy policy for more info.